₦airaland Forum

abbeymighty:
good day All,
Please i need a review on Ipower XMAX 3KVA inverter,
also i need a recommendation for a reliable and good 24v 3kva or above hybrid inverter

I know three people that bought the 24V iPower max and the inverter didn't last more than a day in 2 of the cases, inverter got damaged and they had to return it. The third person used his for less than 2 weeks and it developed a fault that he had to change the inverter, my advice is don't buy the iPower 24V, look at other brands.

On the flip side i know a number of people using the iPower 48V without any issues at all.

Stay away from the 24V of that brand

TechGeek777:
That's what they(GTB) told me yesterday.

Can current account from another bank Firstbank, reference for someone opening GTB Dollar Account?

Do you have experience with firstbank dollar account?

I really don't know if firstbank can reference for GTB, but GTB naira current account holders can reference for someone opening dollar account.

TechGeek777:
I heard they need 2 reference with GT Dollar account before one can open such account.

Is it true?

Reference need to have current account not necessarily dollar account

Please whats the rate for clearing 2014 Lexus ES350

mrbanji:
4.1m

Thanks

Balistic4:
Well, if you followed the conversation, we were specifically talking about 2010

Does the 2010 ES350 also share same popular 2GR-FE engine like the 2013 model?

mrbanji:
[b]For best clearing service contact
Mr Banji
Phone:- 08037243583
Whatsapp:- 08037243583
Email:-
Info@ablyflitlogistics.com
bigdbanj@gmail.com
Know more about us:- www.ablyflitlogistics.com
We are a great company with customer satisfaction as priority. We don't give stress, we give rest. Transparency and diligences brought us this far!!!

Please what is the cost of clearing a 2014 Lexus ES350?

Anyone here driving the 2013 to 2018 ES350, what oil do you use?

Did you stick to the OEM recommend 0W20 or you when for the 0W30 or 5W30?

What kind of oil filter do you use, the onw with metal cap or one without?

Also have you ever done a drain and fill of your transmission fluid?



I plan on joining the lexus family soon so doing some research.

Balistic4:
Well, if you followed the conversation, we were specifically talking about 2010

I actually didn't follow.

Balistic4:
Very correct, no one will convince me to use any other oil for es350 other than the oem recommended 5w30

2013,14,15 ES350 recommend 0W20 but 5W30 is recommended for older models.

gadgetplanetng:
Get a good sachet inverter
I replaced a 1.5kv Schneider Homaya (that has been with Schneider since July) with one and the difference is clear.
Battery lasts longer, less wahala.

Which one be sachet inverter again?

jonescosmos:
Nice Question Bro.

This is because the 16KW I had was from JustStandout (A dealer in Lekki, Lagos), and I noticed that once I go Off-Grid the Inverter could not handle load above 12KW, I did everything I could but no avail. I contacted JustStandout, they could not help, they kept upgrading the inverter from one firmware to the other. I contacted Deye Support and they upgraded the Inverter to the Latest Firmware and the problem continued.

I disturbed Deye Support so much until they asked me to open up the inverter and send pictures of the PCBs inside the Inverter.
I did exactly so and I discovered that the power board inside the Inverter is of the 15KW US Version which is the SunSynk 15k-2P and has a UPS Backup load power of 12Kw Max. Which was why I could not go beyond 12Kw while Off-Grid.

The Inverter was sold to me as the 16KW EU Version which has UPS Backup Power of 16KW only to discover that the PCB is US version. It was clear to me that either JustStandout has scammed me or they got scammed by their supplier and they passed it on to me. Because I engaged them after this discovery and they sounded not to have any idea about these technicalities.

After weeks of words battle with them, I decided to place an Express Order from Deye for the 2units of 8KW EU Version which each has a UPS power of 8KW, because I didn't want to fall another victim to the 16KW Scam.

I received them and deployed them as shown in the picture and then I decided to ship out the 16KW to my house in the Village to be deployed later this year. Since I don't base there. At least no yet. hahahaha

As for the CC, I use the inbuilt MPPTs. Although I miss the inbuilt 3x 290A MPPTs of the 16KW because the 8KW has inbuilt 2x 190A MPPTs each. The 16KW starts sucking solar energy as early as 6am as is capable of guzzling everything that looks like energy from the panels, while the 8KW waits till around 9am at times to start picking up solar energy and cannot go beyond it's 190A capacity.

Please where did you order these 8kW from?
Did you order directly from them or you ordered through a 3rd party?

nawaforyouo:
please how much is the car going for now?

Above 10m for the EX-L and almost 12m for the V6 touring.

Barezzi:
Nice one... but check the bolded again. A typical 30L water heater takes about 15 to 20 minutes to reach the setpoint.

I was thinking a 30L water heater will take more time to heat up, my 30L Ariston can take almost 40 to 50 mins to boil, i set it at highest heat setting and its rated at 1,500W.

viperVIP:
Yhea thanks for the suggestion.
I knew about Will too, and tens of others.
I started my solar journey with sleepless nights reading countless numbers of articles and watching looooots of YouTube videos before venturing into the practical field 7 years ago.

It's been an interesting journey all the way and I hope to be able to review Products in the Nigerian market too, soon on my YouTube channel.

Concerning your friend who bought it from US, if he never switches off his inverter, he might not observe. Also, they hardly have spare parts for this MPPT boards which means there's a high demand for it. That should tell you sth.

A number of people never switch off because that's the reason they have an inverter in the first place, to have power all the time.

viperVIP:
@Justice629 I'm glad you could confirm that as well.
@coldcandy would you just leave an inverter in on position for 12hours when nobody needs power from it, I mean for no good reason, you just want to waste idle energy for 12hours ?
@Dam5reey Ofcourse to save energy, who goes green with the aim of wasting energy? If you switch off the output breaker, you have idle energy consumption wasting away, which isn't a smart thing to do.

For me and based on my usage, i don't see a reason why my inverter needs to be switched off, even if no one needs the energy, my fridge and freezer are connected to it and I want them powered 24/7, i also want the inverter online always so I can have a log of the inverter. In the last 8 months my inverter has been off just about 3 times due to LVD and once when i wanted to connect additional battery banks.
This is just me, i don' t know your setup or use case.

Dam5reey:
Why do they need to turn off Inverter, why not the AC out breaker?
Is it to save battery or what?

I've also been wondering why inverter needs to be switched off

jonescosmos:
Hello fellas, longest time.
Who remembers this my inverter room?
Well, this is what it looks like right now.

2x 8KW Deye Hybrid Inverters EU-Version.
4x 15KW Felicity LPBF48300 Battery Packs.
24x 600W Canadian Solar Panels.
10x 540W Felicity Solar Panels.
Plenty Automations.
ETC.

Beautiful setup.

Are you fully offgrid? If no then what and what do you power from this?

nawaforyouo:
How has the fuel consumption been so far?
i heard the fuel economy is fantastic

Fuel economy is good

Piyke:
Most GDI cars fair better with a catch can. It cuts the amount of oil vapors coming from the PCV and landing on the back of the intake valves. Not much of a problem on port injection engines, since the fuel washes over the back of the valves. However, it's a biggie on GDI engines. Using a borescope since the install, my intake valves now have a dry appearance and not a gunked up wet look, meaning less oil gets there now.

Totally get you on not going intrusive. Got the OEM stuff filter, and should make a video while at it.

Saw the video, impressive stuff.

Piyke:
Nice buy. Enjoyed reading your post.

I've bought the HCF and the transmission filter. Should be doing that soon.
Best mod I've done on this car was installing an oil catch can. Piston tops don't build up as much as they used to. It's something I'd advise any owner of this Accord to do. Video is on the channel.
I like the 2023 too. I don't like the build of the 2018 - 2022. All the best...

I thought it was the 10th generation (2018-2023) that needed a catch can.

I didn't do the filter as I don't want to go intrusive, I'll keep doing a drain and fill till maybe atleast 100k miles before changing the filter.

I'll check the videos.

Vicobaba123:
The inverter is called Esmart 2 MPPT Solar Controller.

Abeg use blower and blow this inverter, dirt dey inside.

Piyke:
Let me backtrack, a bit...

I was in the market for well over a year. Covid only made things difficult. But the real difficulty was, finding what I wanted in a new car. It had to be Honda, Accord, with the following;

1. EX orEXL.
2. 4cyl.
3. 2016 - 2017 (I could do 2015, but upgrade to aftermarket entertainment system in pursuit of Android Auto, plus a face-lift to 2016 exterior, were MUSTs).
4. Super clean.
5. Ideally, less than 100k miles
6. NO Custom duty short payment.

Will pick up on salient highlights in subsequent posts...

Modified...forgot the mileage criteria

Reading this thread and I'm wondering how someone could think exactly like I did and do almost exactly what I did, had to keep checking to confirm it was not me that wrote the thread sometime back.

I got a 2016 accord i4 Ex-l early days of covid, for the same reasons as you; Android auto, timing chain and maintenance. ..etc. prior I had a 2013 Ex which I totaled in an accident.

I also searched many car lots and online (Instagram, twitter, cheki) all I saw were accidented and mostly badly repaired. After searching without success I also had to use a friend to buy though IAAI then shipped VIP on Grimaldi, I got a non accidented with just hail damage and 59k miles, was abit expensive then but dollar was 425 then.

Some of the few things I did were change the windscreen then paint the boot, top and bonnet due to the hail spots. Aside that I didn't do any repair, car was clean and had a VIN auto check score of 92. I also changed the rear sway bar to that of 2012 acura TSX (17mm) which was thicker than stock honda, it reduced body roll and understeer, the car felt flater at corners.

I've changed the CVT transmission fluid twice since I got the car, 1st change was immediately I got it and the second was after a year plus, I want to keep the CVT clean and smooth, will do another atleast by year end when the car will be 3years old. When I got the car I also drained the coolant and replaced with the same honda original coolant. I've been using same tires (for 2.5years) the car came with though I might have to change them before year end. The car came with clean new Good year assurance tires.
I changed the low beam lights to high lumen LED bulbs but left the high beam as they were.
The car came with tints which I left on but added a 70% ceramic tint on the windscreen.
Changed all inner lights, boot light and license plate lights to white LED lights.

I love and enjoy Android auto and will not now buy any car that does not have it. I currently have over 75k mileage but less than 80k, mostly city driving.
I've changed break pads once with genuine honda front and rear pads, might be due for another before year end.
The car came with 2 keys so I have driver1 and madam has driver2, I like the fact that if any of us drives we don't need to adjust the seats the memory seat adjust based on the key that was used to unlock the car.
I also really really love the remote engine start.

Oh I remember one repair I did last month, the rear camera stopped working so I got a replacement on amazon and fixed, camera now working.

I hope and pray to upgrade to 2023 accord hybrid (fuel price not smiling), I've had 3 accords in the last 10 years; a 2008 (which I still own and drives great), a 2013 totaled in an accident then presently a 2016.

Juror:
What's your battery chemistry, specs and panels capacity.

28kWh DIY lifepo4 batteries made up of 2units of 48V 280Ah lifepo4 banks.
Panel capacity is 6kW.

topsy23:
Scroll up the first picture by the right

Is this ABB? How much please?

topsy23:
This is 18breakers outgoing DB check this out

No picture here

vta2008:
Good morning everyone

Abeg why is it that inverter installers always tell you not to use pressing irons? They never offer any meaningful explanation.

My inverter is a 5.5KVA with 4 batteries (12v 220AH)

Note: I've used a pressing iron and air fryer on the inverter without any issues but I sometimes wonder if I'm low key damaging the inverter.

Thanks

I've been using normal pressing iron on my 5kW Deye for several months now, a pressing iron is a resistive load and I don't see any reason why an appropriately rated inverter should not comfortably carry it.

topsy23:
We are ready to give you the best

I have a 12way 3phase genuine ABB distribution board. I want to upgrade to 18 way by just changing the internal 3phase busbar to 18way, do you have the internal of the 18way DB available?

bigrovar:
Mini review of Lifepo4 batteries from Selina of Shenzhen Deriy https://deriy.en.alibaba.com/?spm=a2756.trade-list-buyer.0.0.446c76e9yMKAWz&tracelog=from_orderlist_company .

Order Process
The order for 16 x Eve LF280K cells was placed sometimes December 2022, they were shipped out sometimes in January and I got delivery notification in march. I had no issue getting the batteries from the shipper. I ordered extra items like non polarized breakers, extra busbars and nuts, and a battery tester the EBC A40l Smart Battery tester. All items came delivered with the battery.

Physical Condition of the batteries
Battery came in pristine conditions, they looked brand new and no physical damage can be seen. The packages was well done. I settled for the dual terminal batteries, the only issues I had with this was the terminals were wielded in a way that makes it impossible to line the batteries close together in a build without shorting them. This was not a big deal for me though.

Testing
On getting the batteries, I carried out extensive capacity test to ensure they batteries gave the rated labeled capacity. For this I used the EBC A40L smart tester.

I connected the tester to the battery and connected my laptop to the tester, The tester application allows you to set charge and discharge parameter and you can see a graph of the voltage curve of the battery in real time as it charges.

I set the tester to discharge the battery to 2.6v (voltage of a fully discharged lifepo4 cell) and then immediately charge each cell to 3.65v, it would then cut of charging once the charge amps is at 7A. I logged the capacity of the battery once it got to 3.65v (The voltage of a fully charged Lifep04 cell) in all every battery cell was at 280+Ah (some at 284, the least was 282ah) once the voltage reached 3.65v, this means that the battery were the corrected labelled capacity.

Building into a bank
I assembled the batteries into a bank 16S to ad to an existing 16S 280AH Eve battery bank. So so good. Still early days but the cells are doing well. Each bank is attached to its own JK BMS

In all, I am a happy customer, Selina was very helpful especially her employee Colin, both of them speak good english and they were very communicative during the whole process.

For my own micro review of Lifepo4 batteries from Selina of Shenzhen Deriy, I have 2 different contrasting experiences.

1. Very good experience:
Last year 2022 April ending I ordered and paid for 16 pieces of EVE LF280K batteries from Shenzhen Deriy. Shenzen Deriy handled the shipping and the batteries were delivered in about 3 months (July 2022), I picked them immediately they arrived, they arrived in excellent condition. I completed the build and installed them, I've been using them since then till now.

2. Terrible experience:
Immediately after receiving my first order, I placed an order for 32 pieces of LF280K in August 2022. Paid for the batteries and shipping with Shenzen Deriy handling the shipping. I did not receive these batteries untill about a week ago April 2023 ( after 8 months). Before i could pick up the batteries I had to pay the shipping company an extra N90,000 even though I've paid Shenzen Deriy full shipping fees.
Till date both Shenzen and the shipping company could not explain the 8months delay, all they say is that there is a problem with the container, at some point both even stopped responding to calls and messages.
I introduced 2 people to Shenzen Deiry, they ordered their cells end of November 2022 and picked up in February 2023 while I was still waiting for my cells. Some other people ordered in January 2023 and picked up their cells before I picked up mine.

I don't know if my second experience is a one-off or happens on the regular but the experience has thought me to handle my own shipping when next I order. I thought I should share so that other can see the 2 ways it can go.

FEGEITOK:
I had to follow you because of this post.

I got an issue.

New car. Everything spotless until an Okada decided to use my vehicle to as assistant braking system.

Now I have a scratch.

What should I look for as I try to find someone to help me eliminate the scratch?

Do you have reliable hands in Abuja?

These guys should be able to do it
https://instagram.com/bsg_maitama?igshid=YmMyMTA2M2Y=

Timblogga:
please is the 2013 v6 very reliable?

Is reliable I hear, just make sure to change your timing belt at the recommended interval.

viperVIP:
I can only imagine

A quick one here, people that have a high voltage PV array, do you get electric shocks from them when you attempt to wash them?

I never wash mine online, i have 2 MPPTs on the hybrid inverter, each with a separate isolators installed before the inverter input, so if I want to wash I switch off one MPPT while the other is online and vice versa, when done washing I switch them all back on