i placed my dish between the two satellites.. and was able to pick all the stations

i was able to track 7E and 5E with 60cm and one lnb, all channels are working perfectly. location owerri

faithchild:
with a capital YES.just set it to 1:1 and u are good to go

how about strong 4922A. cos i have more than 5 dishes to combine to

fotadmowmend:

sure ! I unzipped it . In my menu, there is a place where some some biss keys are listed but there isn't multi tv frequency among d listed ones and there is no way to add new one . I even tried deleting all biss keys list but all to no avail.

select the needed channel u want to ope, press 8280edit any already biss key.. press exit, select save... ur done

mtchris:
Someone using 4922A should help him

if ur reciever is fake, it would have fried after the upgrade... first of all where did u get the upgrade file

EMMAACHILE:
Rescan your decoder at Amos 5 17 east
New channel: Cine Afri plus
Tp: 12522 v 27500

bro, it should be astra 2B 28 east 12525 v 27000(multi tv)

officerdola:
pls which strong decoder can i buy to watch rdv,faaji,yotomi on amos 5 and more frequency

strong 4922A

IT4ALL:

Qsat is a full HD decoder compare to 4922. And 4922a...check d colour separation on HDML cables...The picture is mad. Try and see it urself.
The only problem qsat have it is d acc sound problem to few stations and drop in frequency. .ℓ̊ Lό̲̣̣̣̥♡ε̲̣̣̣̥ d box ed qsat 11G
100% Dongle and cccam compartible and very fast blindscanning.

forget all these comparison and use d one u prefer

EMMAACHILE:

Have you used any Qsat before?

i have both

the only advantage qsat has over strong reciever is descrambling channels and blind scan speed. apart from these, it's just an empty box

Rotimiseyi:

pls someone should respond 2 my questn. Thx

open the both end of ur cable, and check for rust

download the file, extract it on a pen drive and flash

good news to those of us using 4922A series. upgrade to the latest firmware version 1.17p middle East. it gives you a correct time on each channel just like old good days. enjoy!

wow am so interested, but will have issues with transportation cos i reside in owerri

@faithchild,that's a real monster u have there... pls can u tell me the size, price and where i can lay my hands on it. thanks and God bless... wilnze@gmail.com

champions tv might do d magic

its not on multi tv

Slapel:
new tp on multi tv 11594 V 29998 showing Rave tv and Ses Demo..

notindome: really trying to track irib tv on Arabsat for two days now to no avail. location kaduna, 1.8m dish.

any suggestions?

do u have teflon inside u lnd?
did u tweak it at the right angle?

oluwafemiii: hello house pls my AIT stations are not showing. since last night. is it just me or general. thanks

ait signal dropped very well, u used to get 75 but it's 56% now

Bencoprof: House rescan these tp to
get interesting chanels on amos5 12382v26999

thanks

it will, i dont need to go

this interview is wired....i dont need to waste my time and energy

i need a 4_meter pan, either fairly used or brand new.. or locally constructed

DARRSAT to be encripted on
16/9/13

wrong thread

Mchenryy: @williams, are u serious? I thought d name of d sat.must b in ur decoder first oooh,..dat means its only d freq,symbol R and pol dat mata?,.dis has ans some of my questions

yes just the frequency, symbol rate and polarity matters

trek4000: Strong has introduced another Mpeg4 free to air decorder which according to them is as good as the 4930 its just that its purely free to air its being called the srt 4920. Try and check it out.

bro u are really far behind...

nice job @olenyi

Why2k: Am use srt 4940 and i want to use Amos 5 but what am having is 4.0w AMOS 2,3. Pls is it the same with amos 5?

the satellite na doesn't matter, just use any ku band satellite

9k is too much, new 4922a is 11k...

is there no LAN port on ur router?
check at the back

mofus1: @williams85 i have a wireless router and android phone pls explain how i can use it to connect my srt to the internet pls

connect a LAN cable from ur router to ur strong, then go to system setting, ip setting and put the DHCP usage on then scan