ibnakeem: any guru in the house, i need real help over my IRIB dish...... i installed the IRIB dish and it even had an 85% signal but it does not display any video except audio.......pls what ca i do to it

What decoder type are you using?

emma4god01: If any one need collective decoder,i have one to give out.call 07037445226.my Base is Ekiti/Osun

what is collective decoder? Pls put more light to it cos i need a decoder and am not too far from u. The 4922a i bought during world cup got destroyed by thunder and i have not got money to buy new one.

Good Afternoon gurus and all forumites,
Pls I need a guide on how to track rdv/ait 16E/17E and multitv 28.2E with a DSTV dish (90cm I guess) and 2 lnb, I have not tracked before so please put me through on what to do first to lock the primary satellite and then how to add the second one.
Cheers.

kingsley6: it seems 60cm dish can't track etv Hyde park.... I spent about 3 hours yesterday trying to track it but all do not avail.... no green... nothing nothing.. please, Assistance... God bless us.

60 cm does it. U might change ur polirization form v to h

xnnalvin:
Hyde pack nids a 90cm dish or 1m

na lie 60cm can do it

DimitriLavrov: Good Afternoon gurus and all forumites,
Pls I need a guide on how to track rdv/ait 16E/17E and multitv 28.2E with a DSTV dish (90cm I guess) and 2 lnb, I have not tracked before so please put me through on what to do first to lock the primary satellite and then how to add the second one.
Cheers.

Bros what u are looking for is simple and readily available here, just use the search engine or still type it in google and it will direct u back here where it is explained vividly. Meanwhile for u not to feel emberrased or think bad of me track multi tv first and then place amos at the down rightside of it while facing the dish. Note: The two lnb should be vertically placed. God bless u.

fasheyitan:
I tracked arabsat yesterday with 1 m dish,I got 65 percent but didn't stay it was flashing like electricity.So I dnt knw wht to do.Pls guy help me out.

Hmmmm guess ur dish size is small to do it get a biger dish

Derbyman: na lie 60cm can do it

pls how many fta chanels tthere?

DimitriLavrov: Good Afternoon gurus and all forumites,
Pls I need a guide on how to track rdv/ait 16E/17E and multitv 28.2E with a DSTV dish (90cm I guess) and 2 lnb, I have not tracked before so please put me through on what to do first to lock the primary satellite and then how to add the second one.
Cheers.

Go through the below thread and study it thoroughly.
www.nairaland.com/1337636/pls-me-installation-settings-position

ryusufu: bros check this page i have explained the procedure for inpuring biss key on srt 4950 https://www.nairaland.com/419577/fta-live-football-matches-announcement/320

bro abeg drop it here

Oluwalogbon:

FOR STRONG DECODERS WHETHER
FAKE OR GENUINE:Go to TV3
channel first,when there,Ensure you
activate patch to be on first,by
pressing 6969,then it will ask for pin/
password,then enter 6969
again,you will now see ON.This will
enable go to the next stage which is
the Main thing,Biss Activation.To
enable biss k*y
Select the channel and press 8280 or
8282. U get the biss page use this
new biss keys 9E 37 79 4E B9 7F 4A
82 then save n exit

can this work on srt 4950

Help guys... Whenever i want to ad tp to my strong 4669xii, after typing the frequency it'll automatically save the symbol rate as 0.000. What's the 'cause please?

---

Help guys... Whenever i want to ad tp to my strong 4669xii, after typing the frequency it'll automatically save the symbol rate as 0.000. What's the 'cause please?

I have bn asking question about d installation of etv hyde park since yesterday but nobody answer me.

mtchris: Help guys... Whenever i want to ad tp to my strong 4669xii, after typing the frequency it'll automatically save the symbol rate as 0.000. What's the 'cause please?

That's because you clicked OK=Scan. Instead after typing the freq just scroll to SR box, click OK when all parameters have been set.


See me dey answer question for this forum.

Timijo: I have bn asking question about d installation of etv hyde park since yesterday but nobody answer me.

Now ask!

xnnalvin:
Bro take it easy b gentle wit d dish.if u trackin frm d front of ur dish track to ur left hand side make sure ur dish face d sky,its easy to track bliev me...

what are the tp for hyde on ses 5 coz the ones given earlier are not turning green.thats why i was pissed off with 60 cm dish

Spy360:
Now ask!

Thanks! I want d size of dish dat wil track etv hyde park, d direction, frequency and SR, type of lnb. I also want to knw if d channels are fta.

wonders shal never end.hello guys i was surfing through the net and i found this pics.an lnb placed below a celing and it was used to track intelsat20@68.5e.uhmmm.is this real?

Segekesy: can this work on srt 4950

not sure because pole complaints about dat 49

Timijo: Thanks! I want d size of dish dat wil track etv hyde park, d direction, frequency and SR, type of lnb. I also want to knw if d channels are fta.

1. 60cm
2. 4.8e - above and left of Amos 5 from front of dish
3. 12734 v 04430
4. Ku band
5. Its a feed, fta

Spy360:
1. 60cm
2. 4.8e - above and left of Amos 5 from front of dish
3. 12734 v 04430
4. Ku band
5. Its a feed, fta

Hmmmm frm ma area n location here in lag 60cm culdnt nail d sat xo ask him is location..

Spy360:
1. 60cm
2. 4.8e - above and left of Amos 5 from front of dish
3. 12734 v 04430
4. Ku band
5. Its a feed, fta

Thanks. D direction is nt clear to me pls. Is it goin to b opposite to where amos5 is facin or wat? Pls if u hav a pic of d one dat has bn installed, post it for easy understandin

Bencoprof: wonders shal never end.hello guys i was surfing through the net and i found this pics.an lnb placed below a celing and it was used to track intelsat20@68.5e.uhmmm.is this real?

"I can see the lnb pointing at the dish right"

"but see pics below latest technology, flat compact dish with lnb buried inside"

Spy360:
1. 60cm
2. 4.8e - above and left of Amos 5 from front of dish
3. 12734 v 04430
4. Ku band
5. Its a feed, fta

but mine was green during match on Tue but did nt display any pic...pls was dat general?

This hyder pack that people are making noise around, does it show live football matches??

Greetings 2 d house... Pls i have a 4669xii decoder that am troubleshooting,but i need to know what DC voltage should be xpected at the IF LNB input(where u connect at d back of ur decoder d cable from lnb). So can someone with a working SRT4669XII receiver help me measure with a multimeter d DC voltage so i can know what to xpect...
The easiest way to take the voltage reading is to go outside to ur dish unscrew d f-connector connecting d lnb and place +ve probe to the solid copper wire and -ve probe to the body of d f-connector. However d reading can also b taken directly from d back of ur decoder.... Which ever,some1 should pls help me verify d voltage there... Tanks

Timijo: Thanks. D direction is nt clear to me pls. Is it goin to b opposite to where amos5 is facin or wat? Pls if u hav a pic of d one dat has bn installed, post it for easy understandin

I dont have a pic now, but it almost faces the sky and points southeast, NOT OPPOSITE Amos 5.
If you do a local search, there is a post by Olenyi on how to track it.

@emma4god, since its a feed, sometimes it could pop up any where so you needed to blind scan. They aired Tue UCL.

Good morning.

Pls, from this link, www.lyngsat-maps.com/NSS-12.html it is shown that the nss-12 57E beam is c band and requires abt 1m dish size in nigeria.

Is this correct?

Derbyman: na lie 60cm can do it

Oga boss were ar u base @?cox @ ma end here 60cm dint nail hyde pack..

Segekesy: can this work on srt 4950

Yes it can bt its nt d normal procedure of 4669 or any orda decoder

Spy360:
I dont have a pic now, but it almost faces the sky and points southeast, NOT OPPOSITE Amos 5.
If you do a local search, there is a post by Olenyi on how to track it.

@emma4god, since its a feed, sometimes it could pop up any where so you needed to blind scan. They aired Tue UCL.

Ok, I will try it.

Spy360:
That's because you clicked OK=Scan. Instead after typing the freq just scroll to SR box, click OK when all parameters have been set.


See me dey answer question for this forum.

actually i didn't click the ok botton, i scrolled but it's automatically saves