₦airaland Forum

spyder880:
Just looking at doors for my clients, and, I come in peace

@Spyder880, would you mind sharing the contact details of the supplier of these doors?

Many Thanks

PremiumDogs:
He has grown so big now

Please publish the price here and don't sidebar the prices. You never know who would be tempted to strive for it once the price is known. Hiding prices is off-putting.

spyder880:
Thank you Sir, the beauty is the only thing that consoles me about this work. I went through a lot to get those guys to finish the work. Very troublesome guys.

Does this mean that you are still unwilling to recommend these guys, even for the sake of the quality of their work? I can wait for quality, the only problems I have with workmen is good quality and honesty with money.

If you can vouch for them in terms of money matters, then I think they should be good for me boss.

spyder880:
I cannot recommend these guys at the moment, they have been very unreliable with their timeliness and I have spent too much energy chasing them around to complete this particular job. I had told them that I can only advertise their work only if they satisfy me on this job, I am keeping that promise and unless they deliver this wrought iron work to this site, I will not help their ministry by giving out their number. Thanks for your understanding Sir.

Thank you for the frankness. I guess you could use enquiries like this as an additional tool to whip them into compliance

spyder880:
I went and inspected the quality of work being done on the staircase rails for this house. We had completed all handrails for the whole building, just remaining staircases. They promised to start painting the others soon.

Oga Spyder, well done for a nicely done project as usual. I am very impressed with the quality of quite a few things here, but even more impressed with the Wrought Iron Fabrication.

Can you recommend the guys that are making these for you? I would like to talk to them. Thank you.

Hi all shipping agents, I am planning to import a number of doors (wooden and Steel doors) from China for private use and I need quotes from some [b]reputable [/b]organisations who can receive the goods in China and deliver to an address in Ibadan.

Please quote for

1. Sea freight (cbm)
2. Duties
3. Delivery in Ibadan.
4. How long between receiving goods in China and delivery in Ibadan.

Many Thanks

SoldierPikin:
25K is the quote I was given for 2k

Sorry, but what do you mean by for 2K? 2K of what?

twinskenny:
depend on how many line.. 6 or 8 line

What do you charge for 8 or 12 line (If you can do 12 line) with motion detection, CCTV cover and alarm?

Zammzammm:
Please nairalanders i need information about this snake. The snake is very common in eti osa area of Lagos.

This is the second one that I have killed this year in my compound . There are undeveloped plot of land around my compound, I suspect that they come from there I need to know the specie, and if they are venomous and poisonous.

Thanks for anticipated assistance

The Photo you uploaded is not sufficient for the experts to answer your question. The easiest way to tell if a Snake is venomous or not is in the shape of its head and your photo does not show the head of this Snake

Send a full picture with a detailed view f the head and this should make life easier for the ones who are able to attempt the question.

heywhy4u:
We have it in large quantities very neat, clean and dry.

I may be interested in your offer, but I need a few areas addressed before I can decide:


1. How much do you sell the sack and what weight is the sack?
2. What is your mode of delivery across the Country to a location like Ibadan and Shagamu area?
3. What is the time frame between order and delivery?
4. Do you do Cash on delivery or how does that bit work?
5. How seasonal is your supply or do you have all year round?
6. Do the prices fluctuate all year round as well or do you try and stabilize the price all through the year?

We can discuss further once you address these questions.

mrfolu:
Any serious buyer can call 08124461809 for physical inspection, thanks.

Ok.

mrfolu:
8 blocks of 3 bedroom flat for sale at Surulere area in Lagos.
Interested and serious buyer can reach me on 08124461809 for physical inspection and purchase.
All documents are intact
Asking price: 125m

Sir, I think you need a better description of this offering. 8 Blocks of how many flats per block? Do you have photos? Are there other descriptions that will make this a more attractive offering rather than leaving potential buyers with their own imaginations.

Please supply photos and better descriptions.

mufutau55:
No staunless railings either. I went for wrought iron with special mahogany on top of the railings. Old school type.

Hajji M.

Nice to hear that someone has already done this successfully. I take it that you procured it all in Nigeria. If you did, would you mind recommending your contractors? I am planning on using the same for a project in Ibadan.

Any idea of prices would be helpful too.

Thank you

Rubbiish:
House any suggestions of water supply for high rise building of about 6 floors. Since constructing water tank stand of such height is odd.

You can design your house with a sufficiently roomy roofspace to accommodate water tanks. You will have to have adequate structural support to carry the weight of the water tanks though. You will need to use a numberof breadloaf tanks for this purpose.

Let me know if I can be of any assistance in guiding you, but you will need to share the plans for such advice.

LeonOgu:
This is 648sqm and it has a Registered Covenant. Though pictures is not available now but it's from a reliable source, just make out time and check it up and I'm available for inspection

If you are truly available for inspection and the sale is genuine, you will be available to take the photographs and publish here.

Remember that your readers may not be based in Lagos.

Try headpad for one.

Wonderboy1:
I will suggest 80kva to 100kva.

Thanks @Wonderboy1. So, roughly, how much then is a fairly used Mikano of 100KVA and a brand new one for the same specification?
And are there any quieter and tested brands than these Mikanos@

Wonderboy1:
Of how many horsepower is the acs?

It is about 1.5hp each.

How many KVAs would you need for 30 ACs and are these available as Super-silent machines

Hi Rushtec,

The allegations that @harryman made about you here are heavy, please address these even if you don't care about the loss of your business online. You never know if anyone here will be the next Minister of Works/Housing and will be in a position to give you that once in a lifetime contract.

Try and resolve his concern and don't just ignore him or his complaint. It has taken him so much to get that money together, so he deserves to get some good result out of the spending. Remember that a good name is better than Gold or Silver

Thank you for being a good Nigerian.

Nice to know that these sort of products exist locally, but would be nice for you to give us an idea of costs.
Roughly how much do these cost?

vicol:
Final Look

Nice looking Parapet. Is this the only mold that you have? I am just about to cast some Parapets, but i different design from what you have here. Can you cast other designs as well?

I can forward you an example if you supply your email or WhatsApp contact.

Good morning all,

Much as it appears that this thread is dedicated to Stainless steel, I wonder if we have any specialists in Wrought Iron Handrails and Balustrades on the forum?

I would like to see photo examples of Wrought Iron Burglary proof, balustrades and handrails, including prices.

Thanking you in advance.

Marilo:
Here you are https://www.nairaland.com/581033/stainless-steel-handrails-protectors-08068966121

Many thanks

rotecch77:
happy wkd

Hi Rotech,

Are these stones in the picture of marble or what ?

Hello all,

Do you know anyone who is great with Wrought Iron Balustrades and Handrails or any threads that specialise in this sort of work? Your assistance will be appreciated.

Thank you.

jobontech:
I have not done 12 lines b4 only 8 . Thanks

Do you have a photo of the 8 wired one and how much is that?

jobontech:
We charge per Mitre. A mitre is ₦3000

Is this likely to be affected by the recent change in the value of the $$?

Additionally, please show some more examples of your current portfolio. I see that what you have is just 6 cables, do you have 12 cables and how much would that cost?

Not just the pictures together, evidence of funds transfer and the text messages will be valuable in establishing the truth in this matter.

Guys need to exercise patience before prematurely and blindly apportioning bales or absolving either party of blames in this matter as of now. Get the evidence before getting to judgement time.

blessedvisky:
Since the report says they were travelling together for sometime, a pic of the two together will go a long way to convince peeps

So what does the 10k cover?

Additionally, how do you keep the current active when there is power outage?

jobontech:
We charge per Mitre. A mitre is ₦3000

rukatech:
Look at the completed fence work. It cost me N600,000 for the entire work, including wire for the fence lights, and some material for barb wire base to be installed.

But when you say it cost you 600k, is that just for the labour or all the materials, including cement and sand for plastering?