₦airaland Forum

twinskenny:
i get your point.. pop is a little different

you ask a guy to do 54sqm at 1k per labour...

you still expect him to buy casting board 13500
range from 4k he will need 4 or so thats 16k
thats almost halve of the labour cost....

hope you understand now..

as electrician you dont need to provide me any tools. pay my labour and get your work done. pop is lil different

kopell:
YES Ooo my brother, the Engineer will spell out everything needed in contract including paint Buckets including line's. They are all yours when they finish. One thing that always leads to argument in contracting job out is inflate the materials needed, even after bringing the materials to your site when the job is done many of them will claim the reaming materials are theirs and will like to take them when they are done. I don't understand that ooo. I think we should have a debate on this issue in order to have better understanding.

twinskenny:
[/b]comparing pop with bricklayer?[b] and yes if you give a bricklayers job, you still need to provide them shovel and all. [/s]unless am mistaken[s]

bolu1986:
...if you give out the job as contract say 6k per square meter then i will be the one to provide all the tools and those accessories mentioned up there but if you are buying materials by yourself then you will be responsible for those stuff

Olumighty123:
Okay sir, I just don't fancy those aluminium doors

Olumighty123:
But why is it not suitable for bathrooms? Plus which types of doors would you suggest to be used for the bathrooms?

Twostep:
Greetings house, please are these kind of doors ok for internal doors or are there any disadvantages therein?

KIDfurniture:
When it comes to America panel doors max it depends on usage by the owners. Mine is on 3 year now and still strong. As for HDF , my brother I have seen the parts fall off one by one. This buhari time we all need to save cost so we can use the left overs to complete other stuffs. If you can afford hdf doors plz go for it but don’t ever go for pako doors oh from sawmill lol.
Is there anything wrong with those doors?

Siberia01:


Seems Abuja residents are very wealthy

Such amount can even get you a flat with swimming pool in Uyo

24hr electricity

olukaygold:
6k per sqm sir. Quality work assurance.

olukaygold:
Adoekiti/Ilorin but we work nationwide.

olukaygold:
Yes sir, that's;if my Company handles the Project.

ezenwaez:
Yes.

Soldierboy30:
Yes, those are doors, they'll be blocked as suggested, thank you. Any other observations?
Good morning

hamtabfawaz:
If you want to install pop designs (casted onsite), the ceiling must be removed first.

You can also opt for something like this. (Image below.)

ezenwaez:
How To Check Your Npower Portal To See If You Have Been Shortlisted For Npower Deployment Without Receiving Deployment Message

Npower batch C stream 2 beneficiaries can check their Npower portal to see if they have been shortlisted for the Npower deployment exercise without having to wait for the deployment message. In order to check the Npower portal to see if you have been shortlisted for the Npower deployment process the Npower Batch C stream 2 beneficiary should carry out the simple steps below.

1) The Npower batch C stream 2 beneficiary should login into his or her Npower portal with his or her Npower ID and password.

2) After login into the Npower portal the Npower Batch C stream 2 beneficiary should click on the deployment tab immediately after the verification tab on the Npower portal.

3) The Npower batch C stream 2 beneficiary should scroll down the deployment page, once the address of the Npower place of primary assignment is displayed, the Npower Batch C stream 2 beneficiary should write down the address of the place of primary assignment on a sheet of paper.

4) The Npower batch C stream 2 beneficiary should locate the local government secretariat or zone where the place of primary assignment is located, then the Npower Batch C stream 2 beneficiary should proceed to that local government secretariat to check his or her name on the posting list at the deployment centre.

The above step is a quick procedure an Npower batch C stream 2 beneficiary can use to check if he or she has been shortlisted for the Npower deployment exercise without waiting for the deployment message.

ezenwaez:
Yes.

Muhylonaire007:
It's like they are doing you? Na Drug marketer send exam invite with First Bank email?
They are not doing you, but you are mad sir

Idolla:
How abeg??
Glo administers aptitude tests there

Muhylonaire007:
For someone coming from Egbeda, how do we locate the JKK house?

Micksam:
Please did anyone receive only text like me, no email?

twinskenny:
All smart switches available

08051355133

bolu1986:
Ibadan thank you..

Summary
177sqm
Materials used...

92 bags of cement
70kg filas

And other accessories...

Not too busy designs but we couldn't get good cement for a good mix...


Who's inviting us next?

07088534661

Successbay:
Hmm..

The main thing is both parties should be honest on their dealings. If a customer wants to buy his/her materials.. let it be and charge at a rate you wouldn't compromise on the quality of job to be delivered, nor make him spend unnecessarily.

The customer should also be considerate in the bargain.

FEGEITOK:
A thoroughbred tradesman has industry connections the end user doesn't have

Option A helps his maximize his expertise and connections

He will get the materials at prices the end user can never get

He can maximize his gain by leveraging the above

He will work on your project with a better frame of mind than if Option 2 were deployed

End user wanna play smart?

Cool!

Tradesman can play that game too!

At the end of the day, it is an information differential that makes most trades possible

bolu1986:
Option A is always better. But client think they can save enough money by going for option B but in some cases it won’t happens….

Pay per sqm with materials in labor inclusive then go to sleep…