₦airaland Forum

IyaIode:
Is OK to flush out and refill all the atf at once in a transmission with 145,000 milage?
Tell present atf in the transmission is clearly oxidized and smells badly but it's not Brown or black yet. Doing the regular 4 quartz drain and fill mean mixing and oxidized atf with new one even if it is done twice or 3 times. I am so confused right now.

DECOtech, GAZZUZZ, IdaraCHODB, sultaan
I have also read about drain through the radiator hose, I have actually seen someone do it but with my transmission at 140,000 miles I am scared of the new transmission dissolving gunk that will further damage the transmission.

Very dangerous, transmission could fail. What I do is, when I carry out a complete drain and refill, I place a filter in between the heat transfer lines between the radiator and gearbox, and tell the customer to come for replacement every week, for four weeks.

lomomike:
No beef intended but I wonder how some folks are lobbying to fix a Hybrid. Those vehicle require extra highly qualified toyota trained specialists. Besides, the Hybrid electric system have very high voltage which can instantly knock a man down if handled with out professional guidance, knowledge of how to handle their repairs plus the right tools for such repairs. Some time ago, a kazeem bled the brake system of a highlander hybrid like he does to a gasoline vehicle. Till date, the owner is spending more on the squishy brake feel.
As for that ignorant mechanic starting up a Hybrid Accord without battery in Adanny01's thread, he's on his own, I wish him best of what comes his way.

Brakes need re-calibration. Done it before using a toyota software.

oskamboo:
Don't know why ABS and hand brake indicators on the dashboard refuse to disappear after releasing hand brake and when car is on motion. Any help will be appreciated.

Come for a free scan, which will identify faulty sensor.



Free scan expires 6pm today 04/08/15

There's no blood.

He might have been killed and placed on the tracks.

Chibzee2:
hey guys, please can a 2002 honda accord AKA Baby boy be regarded as a reliable car, i am on the verge of getting one for family.
I have heard complaints though but i would like some expert/professional or experienced advice.
urgent reply needed


cc GAZZUZZ

Good ground clearance
Reliable engine
Fair 2nd hand value
Available parts
Available technical know-how to fix it.
Spacious interior and boot..



Down sides.

Can be stolen in 5mins


What ever you decide, ensure you don't buy a rustbucket, remove your agbada and go to a pit to check under for rust.

I thinks it's called FRSC.

Driver must have lost his job by now.

GreenWorld:
@ GAZZUZZ, can i bring my car for check up tmoro morning. Having issues with my fuel gauge and transmission selection. Thanks

Yes you can

rukyboy:
I have a similar problem with my Honda DC. Anytime after I've driven d car for a while. Usually after 30 mins or so,the car refuses to move if d ac is on. The engine will be running and d ac will be on but it won't rev anymore... The engine won't trip off but d car won't move again until I've turned off d ac

If i shift d gear to "park" i will be able to rev it as high as 8000 rpm if i want while d ac is on. But when i shift to "Drive" ,d car will refuse to rev or move until i switch off d ac..

Gurus. Pls i need help desperately

Also d fuel consumption of d car is crazily high and scary!!

Luvinhubby and Gazzuz. Pls i need your suggestions.

I love evil problems like this, give me a call, need to meet your vehicle.

igbizen:
On the driver's door beside the door lock/unlock
button there is another single button which is the
main control switch for turning on or off other
windows. The switch has a red stripe on it. Press
it to come up to switch on other windows. I use it
together with the child lock on rear doors to stop
children from rolling down the glass or opening
doors. Sometimes i use it to stop annoying
passengers who usually will leave windows open
when they alight from the car and becoming a
security risk.
Someone must have pressed urs.



I have tried DAT not working.
I even hear a ki sound when I try to wind dem down. is as if there is power to that point.

Need new motors for the windows.

This one nah sidown look

Gods300men:
Yes. Got into a very serious flood two days earlier. But didn't think it got into d car.
So I have to program the key too?

You don't have to reprog key, just sync engine Ecu. But how do you know urs is bad?

Gods300men:
Specialist in the house I need or help. I purchased a 2006 Toyota 4rynner last October and didn't have any issues until recently.
I woke up one day and tried starting d car and it refused to start. I tried till d battery went dead.
Since then my mechanic (who specializes in Japanese cars) has tried all he could.
We have even checked the timing, scanned with several OBD and lastly we are replacing the ECM.
I want to know if replacecin the ECM will need reprogramming. Since we are getting the exact one.

Guys I need ur help here Plzzzzzzz.

Seems mecho is guessing?

Throwing parts at a problem works somtimes, but that's the expensive route, there are easy ways to know if the engine Ecu is faulty, or crank/cam sensor or just the Ecu fuse. Most people scan, others scan and diagnose. What you really need now is the diagnosis part.

Engine ecus are very rugged, and do not die off without a cause, what's the reapir history of your vehicle? Do. You live in flooded areas?

A brother had an accident with this car, and brought it to me to fix, I want to surprise him by gettin him a new"toks" vehicle'

If you need entire vehicle or parts contact me.

Engine and transmission perfect, interior perfect, tyres and wheels perfect, suspension perfect,front beam not bent, engine harness intact. "Car drives fine"

If you are a car dealer and you want to propose a swap please call.



08023251039 08033910382.

Hope this does not qualify as an advert?

depair:
pls gazzuzz how do i rectify the car is runng rough. p0340 camshaft position sensor
help ur broda

Call for fix. But this one you are complaining about scanning fee how repair go be nah?

Ziggyzito:
What's up house? How much would it cost to change the speakers for a 406 2003 model? And also the cost of a factory CD loader to replace the cassette player.thanks.

Cd player (toks) about 15k (plus re-writing vin) speakers, not really sure. But you can ask this guy +234 813 453 6143 he just replaced his.

igbsam:
Oga Gazzuzz, i greet you. It was nice meeting with you yesterday even though you were so busy with work. I hope to make up with the appointment for Tuesday.

I also forgot to ask, do you service Car CD Players ?

Was nice to meet you too. Don't service CD players, see you on tuesday.

Peugeot 406

Brake pad replacement

Peugeot 406

Set all locking pins with new belt.

Peugeot 406

Timing belt replacement in progress

Peugeot 406 EW10 D9 saloon 2003.


Faults.

Suspension noises
Timing belt/tensioner (preventive)
Power steering leak
Spark plug coil replacement
Cooling fan (setting back to factory)
Speaker replacements (all 4)
Tape player - CD player
Panelbeating
Abs sensor replacement
Brake binding
Wheel Alignment (front and rear)
Brake pad replacement
Brake rotor resurfacing

Jaguar S type

Making progress on the job, radiator replaced, spark plugs replaced, injectors serviced.

Cooling fans are set to run direct when the fan is turned on, I tried looking for the factory fan module in the market, but found non so I had to improvise.

Now it's better to use the factory specs but when you can't get it then kazeemy work comes to play.

The main coolant hose from the top to the radiator was cut in 2 and a straight aluminum pipe was fitted in-between, before that I bought a thermostat switch for a camry 98 (lower side radiator) and welded a threading on the aluminum pipe to ensure the thermostat could be screwed firmly, also installed an "O" ring at the base before screwing it to ensure no leaks.

Now the thermostat switch is a closed circuit when coolant is below 90deg and opens when temp is above 90 now that's a problem cause it cannot be fitted into the fan relay straight , so another relay was designed to change the workings of the thermostat to open when above 90 and closed when below 90 (will try and post pics later), wired up tested and works perfect "no more steady fan, and temp is steady at half mark without overheating.

shamecurls:
The driver parked very well. He is not even obstructing traffic flow. I doubt if he has committed any traffic offense

This is an accident not a joke.
I pray you never have an accident.

Been really busy, and have not been updating with pictures.

Jetta has been fixed steering is perfect.

Jaguar battery ran down and is being charged so work done can be tested.

Other vehicles are for nairalanders and they specifically instructed no posting of their vehicles on NL, so I am respecting their wishes.


Should be in delta and ph tommorow, pics of work done there will be posted.

depair:
change water pump n the rattling noise ceased i hope this fix the timing belt malfunctiong
I notice my Check engine lite came on after the timing belt was cut n after its fixed the lite remained on. Pls help

Scan.

But my money is on the camshaft position sensor.

depair:
my timing belt kips malfunctioning it does not cut bt gets sort of mutilated. av change belt lik 3 times within a month
toyota camry 2001 drop lite 4 cylinder
i also hear a ratling sound dt seem to reduce wen engine is warm
pls help

Remove belt and roll all movable rolling parts, 1 of them is bad

mykl01:
GAZZUZ, this your car don start again o!!!! The gear stops selection after the 3rd gear, and at 100km/hr. I have changed the oil, but no change. Any ideas?

Scan vehicle.

Solenoid a stuck or knock sensor bank1.

More pics jetta 2005

Jetta 2005 work continues.

Electronic steering removed from vehicle, replacement bought, also notice lower arm bushings were fitted with tyres

Lower clutch port also bought.

All parts are toks.

anonymousjuju:
Abuja

Searching my Abuja contacts,will get back to you soon.





[size=1pt]lomomike can you help?[/size]

Emperoh:
Interested in your evap issue solutions

Leak from fuel pump area, bolts incomplete.

Will use scanner to do Evap test.

Camry 2001

Rear shoe replacement done.