₦airaland Forum

gateleo:
any adjustment was not made to the kickdown cable!!!

Take a pic of the cable and upload.

gateleo:
Background to the problem:

I changed my Gear oil using the recommended ATF fluid by Toyota for camry 98 (dextron III) and the filter was also serviced last week. Before changing the fluid i do not have any problem whatsoever. I changed it because i have not change it since i bought the car (a year plus).

Now the Problem:

After changing the gear oil with Oando ATF dextron III, i noticed when ever i accelerate, the gear will not change/select until i release my leg from the accelerator. Once i release my leg from the accelerator, the gear will change immediately and the car will start selecting normally. But once i slow down again, the car will not change to another gear until i release my leg from the accelerator.

Please Solutions:

Please what could be the solution to this problem, i took the car for scanning, noting was detected. everything seems okay according to the guy that scan the car for me.

Kindly help me out guys. Sincerely, i am not happy with this development .

Thanks in advance...

Was any adjustment made to to the kickdown cable? [img]http://t3.gstatic.com/images?q=tbn:ANd9GcSASeJlky2ISBTqnE8jTpiXHMmsud4pl50NI9idsn9R5I9Qe88vV42__hpc[/img]

If yes please readjust, it might be too taut.

Nice, ild rather buy made in naija they last longer, real leather.

chillex8:
Hyundai xg 350 , 3.5l DOHC 24valve.
Tiptronic transmission..

Guy, that engine never dies.

But

The engine control unit ECU, The computer that controls all the engines activities is very unforgiving.

There are several sensors on that car, all sending signals to the ECU.

Any fault with one sensor, the whole system wil kolo..

There is nothing you won't experience...


The most unforgiving act, is when you disconnect the battery terminal

Chai!!! For days, your car will be in a vegetative state..

The ECU, will just be sending wrong output signals and the car won't run fine...

If you must own that car, u must be strong willed..

I can say its the most electrical car for its production year..


Its not a car, you will just open bonnet, and start touching stuffs.. You will be punished..

Common problems are with the EGR valve, Maf sensor and MAP sensor.

Good side, is this car is swift. Has a very silent engine. Transmission is smooth.(5- gear auto+manual)


If you must own one here are the terms :

. Make sure you buy one with low mileage.

. Make sure the ECU is the right one.

. Make sure there is no cel light on.

. Make sure the thermostat is in place.

. Buy a scanner too.

. If you must replace any part, purchase OEM with matching part no, else it WONT work.

If you can meet these terms, you are good to go.

Never allow anybody open your bonnet to touch anything..

Before you touch anything, plug your scanner and confirm.

NEVER DISCONNECT YOUR BATTERY..



P.S
That car is a speed monster

That sums it up.

If can't beat them join them.

Just got wind of the news more details as I recive more info.

Yaris with the 2nz engine is almost indestructible please stick with it.

AutosBay:
Replace the power steering hose to solve the leakage problem as for the rapid fuel consumption try reducing your air condition usage.

Experts advice.

chillex8:
Op, contact me... I'll give you 50k, in addition to converting it for u.

You win!! I GIVE UP!

[img]http://smileyshack.files./2010/12/smileyslaughing_lol_rofl__100-100.gif?w=35&h=26[/img]



[img]http://smileyshack.files./2010/12/smileyslaughing_lol_died_100-101.gif?w=42&h=42[/img]


[img]http://smileyshack.files./2010/12/smileyslaughing_sign_lol_100-101.gif?w=59&h=50[/img]

chillex8:
500k plus tiptronic plus creader 6 to scan your engine and transmission..

What ya say

Ill teach him how to do it for free.

new deal 550k plus free odb2 scanner.

DECOtech:
Mr. Gazzuzz no go kill me!
.
Well, we did it with success in older vehicles like the 1982 M/benz (flat boot) to the 1995 M/benz (Vboot)
.
We can experiment with newer and more delicate car models like your 2004 honda accord and see how it goes.
.
What you need to do is to buy
1. A flywheel that can accommodate a torque converter
2. An auto transmission unit
3. An ECU (brain box) for an auto tranny honda
4. Engine harness from an auto tranny Honda.
5. Provide money for series of ECU programming and engine tunning
.
And you are good to go.
.
After the job is done, I will now tell you how much you will pay for my labour
.
Pls note: Na experiment we dey do oh! So if it doesn't work well, no just talk nonsense to me cos my boys will beat you on top of it.
.
God bless you plenty.

Mine is not an experiment.

Now 650k cause of bad market.

jorcycos:
Pls my chevrolet venture consume much fuel and the power steering is leaking. Expert advice for repairs

Sell it.









Or































Read through the posts in cartalk there a proper way of presenting your problems.

chillex8:
If you don't know anything about cars, pls stay away from Hyundai xg 350..

That car is devilish..

If you want me to explain more, just quote me.

I quoted you again..............

chillex8:
If you don't know anything about cars, pls stay away from Hyundai xg 350..

That car is devilish..

If you want me to explain more, just quote me.

I quoted you.

Chilllex8 come here.

https://www.factoryfive.com/wp-content/uploads/2014/10/Factory_Five_Racing_LA_Trip_37.jpg

Look at the size of that engine! This pic looks like if you hit the gas pedal the front end will take off leaving the passenger compartment behind

Siena:
[color=Blue]Yes. I once bought an unfinished project. It was a Dax Colvin / Porsche 911 Carrera. I finished it off, used it for 2 months, before someone made me an offer I couldn't refuse.

It was powere by a tuned 1760 Big Bore VW Beetle engine.[/color]

Do you have any pics? Would love to see how the engine sat in the bay.

sultaan:
If I buy a couple of kit cars and start shipping it ot assemble in Nigeria will I be considered a manufacturer?

http://en.wikipedia.org/wiki/Kit_car

https://www.factoryfive.com/kits/factory-five-factory-five-autumn-kick-off-sale/

This is the part of automotive world that helps the west people are free to do/build what they want.

FG will add you to the current list of car manufacturers on their list with an acclaimed assembly line

“So far, they have not shown any negative trait. The medical
history shows that they don’t have rabies or the Ebola Virus

Nigerian police, stiring up drama since 1900, wetin concern ebola for the matter now?

feelme3:
Hello people,

I am planning getting my first car and a friend has just shipped in hyundai xg350L and a Dodge Challenger.

I am no expert when it comes to cars as I have never owned one before. But right now I am considering picking up either of the cars.

The Dodge looks manly and intimidating, however my wife prefers the Hyundai which also looks cool and laid back.

Please advice on which I should go for that will serve for sometime without giving much headache as per maintenance.

Thank you.

None. Parts for both cars are hard to get.

[img]http://t0.gstatic.com/images?q=tbn:ANd9GcS4vkI1s3Uj6ZFBwCwJCvvlDpmKYRyTjoTDxH7qAO6vHxKNxlyQwFwp0SQ[/img]

2008 challenger?

[img]http://t3.gstatic.com/images?q=tbn:ANd9GcTJrXREK2f7cDdf3uBErGDMIR_-31SIR6x570kezWHM5SaUb6ZMinHAG3n-[/img]

The dodge is a chick magnet, no way the Mrs will agree to buying that.

Bauchi, gombe,dutse,jos these 4 airports combined will strugle to fill up a boeing 737 in one day, in my opinion its just a waste of money for now. They should empower their people economically, set up industries for processing agricultural products, after they have done that they can now think of setting up airports.

9icetoo:
Its not really advisable to put your auto trans in neutral to coast for considerable periods of time. With parts still moving, the pump in your trans needs to be pumping the fluid round to keep things cool in there. Secondly, accelerating and then coasting in neutral and then accelerating again, isn't going to give you really good fuel economy. I have monitored my real time mpg figures using a scan tool while driving and came to realize that this method doesn't really give good fuel economy. Maintaining a steady speed on the other hand does.
Most new cars have fuel cut off technology that automatically cuts off fuel when a vehicle is coasting with high RPMS. This usually happens when going downhill. So shifting your gear to N will take away this function. In N, the ecm will still inject small amounts of fuel to keep the engine running while if it was in D, the momentum of the tires and crankshafts linked together by the gear will keep the engine ticking but without using any fuel. The fuel cut off is usually around 1500 rpm on most cars. When going downhill, leave your gear in drive and take ur foot off the accelerator. It gives you engine braking, fuel cut off and enough time to react if anything goes awry.

Nice explanation.

you have been replied. seems you like opening new threads.

https://www.nairaland.com/1958516/car-talk

jking001:
Why must it be Yoruba and other or hausa and others do you guys realize there are other people in Nigeria fucking racist.

Rochas is?

Funjay:
I noticed of recent that whenever I am in traffic, my car acellararion loses power and I'll have to switch off and in the ignition before I can continue my journey. IG has happened abt 3 times now in the space of 1wk. 3 mechanics have told me different things. 1 used its d throttle Sensor, another used its the fuel pump and another, the injector. I don't know where to go to again, please auto gurus, help me out.

1. You are posting in th wrong section.
2. When you finaly post in the right section you will be told to scan your car and post codes.

Please post in cartalk.

dis one wey i de bend head to view your pics

make sure from the harness you can get this voltage readouts[b] ignore the center pin[/b] https://dairally.net/daihard/chas/MAP/DensoMap.jpg

Docgenius:
@gazzuzz wooow you really seem to know my thoughts. I was really planning to get one, I even had to browse on which one to get. Hmmm.....can u please suggest one and the likely cost of it. Thanks a lot.

go to your local electronic parts store get a digital multimeter it cost between 1-2k https://cdn.shopclues.com/images/detailed/459/Multimeter_1367903256.jpg