₦airaland Forum

Belvinho:
Oga mi, I'm currently suffering from a similar problem but only when the AC is running. When AC is turned of, the car idles smoothly and around 800 RPM.

Once the AC comes on, the RPM starts dancing between 200 and 400 with serious vibration. To stabilize, I'd have to raise the RPM to 1000 by throttling.

How do I overcome this issue?

Car is a 2001 Honda Accord V6.

GAZZUZZ:
excessively low RPM, service throttle body, or replace if defective.

billy187:
I think I just wasted four minutes of my life

justicee4all:
Please I have a toyota rav4 2002 model

Just last weekend I nOticed some noise while moving or changing the gear to drive

The noise became unbearable and so yesterday I decided to take it to the mechanics

The mechanics called this morning telling me my front azole is bad that I kust change it


Please I think the price his calling is to much how much can I get a rav 4 2002 front azzule

Sunnymatey:
And from now henceforth, any 1 Christian that is killed by herdmen, 2 Fulani's will follow. No one has the monopoly of voilence.

and you left your number in your signature? No body know you o! You go just loss.

starlionnotch:
I am about to purchase an Abuja used Mazda 6 car, the inside is very clean without dents, even the body.
But the person selling was sincere enough to tell me that there was an engine change and the sittings will need changing.
I drove the car, and it was very smooth both transmission and torguing. Only for a very slight viberation while on drive and neutral, but runs normal on park. Engine also sounds well. AC runs perfect, sound system in perfect shape, the arms are great.
What are the possible risks with buying this car?
Any bad experience with mazda cars, particularly Mazda 6 of 2005?
The VIN is attached here also.
Cc Gazzuzz, Sienna, and all the great auto gurus.
Thanks.

id4sho:
Pls, gazzuzz. I was given a flooded vehicle,a 2014 Corolla.its was submerged to Dashboard level,can it be repaired here in nigeria. Am particularly concerned about the engine and electrical electronics parts. Thanks in anticipation

princetom1:
Holiday in the oda room. Location confirmed. .
1 month leave, phone taking leave too

No let 200milion nigerians de wish say you move go the other house o!

princetom1:
Hmnn, sorry man.

Announcement: Am on holiday in Pluto of milky way planet . Not reachable until march, y'all can reach me on call only . or pm me, bad network in Pluto most times. Please, you all should help out here sir/ma
cc: dominique, GAZZUZZ, Kingreign, Nurey,

Hand over properly like our presido, and state where you will be so we don't assume the worst

mayor2013:
Your Ac specialist is a quack. A damage would be done. You would kip buying serpentine belt as a result of this and also there would be more stress on compressor. By the way what car is this?

mayor

adex79:
Anybody with Kia Rio 2007-2010
kindly post and put price

Kashif:
Toyota came out with the world's first 8speed AT. It has three planetary, and remains the only 8speed that compact. Others have four so, you cannot say they are as compact as their predecessors. Compare this to a 6speed with one planetary (though not simple planetary). They keep adding members until a revolutionary design becomes available, and they start all over again. The advent of Ravignueax planetary made it possible for a 10speed to fit into the same engine bay as 5speed but does it make it smaller or lighter? No.

Wide gear range has nothing to do with a transmission's torque handling capacity. A 2speed can be designed to handle a torgue that will smoke a 10speed. It is in the holding members!

Looking at numbers now, the 6speed's last gear (sixth) has a ratio of 0.586, while that of 8speed has 0.685! What this means is given the same final drive, the 6speed will deliver better highway mileage than the 8speed! Now, something that I look out for in all those 'improved' transmissions is the number of overdrive gears. The 5speed has one, even though live feed shows two. 6speed has two, and 8speed has two. 5speed has its direct ratio (1:1) at 3rd. 6speed does this at 4th, and 8 speed, at 6th. So why have five under drive ratios in a transmission? A valve that should move about three times in a 5speed from 1 to 5, will probably double its movement in 8speed. The result is accelerated VB wear. There is measurable improvement in 6speed from 5, but nothing to show in 8.

Tell me the 8th gear has a ratio of 0.480 then I will clap for them! Those are more for marketing and competition.

spora:
Ketu, Alapere

kellystech:
My car vibrates alot. I've changed the engine sitting all of them but the vibration is still there I dnt no wat else to do

kingreign:
Yes na

sholarb:
Op, your car is equipped with an after market Parking Heater. It allows to quickly free windows of ice and snow in winter and also to preheat the engine.

kingreign:
The year is still young and I believe Gazzuzz, Mayor, I and others will be called upon to change more engines. The money go sweet o
That is my comment

this year will be sweet for bois.

Readonee35L:
Contact GAZZUZZ, kingreign or diportivo.
They are experts

pissss...... wooss.... woosss.... wobii...

Be very careful!!!















I use nissan engines for the construction

TRYGO:
@Gazzuzz. That was the complaint from the client. That has being rectified after the repairs.

spora:
I create a thread where I talk about my Toyota Yaris that does not accelerate and shakes on A/c.

The summary of the complaint is:



Based on advice, I took the car for diagnosis in an Oando Autocare station, where the below result was presented to me.

I wouldn't know whether the result is correct or not, but after changing the sensor talked about and even the pedal, the problem persists.

Does it mean the result was not correct or it was not properly interpreted? Who can correctly interpret the result please?

P2135 (1) Generic stored throttle/pedal position sensor/switch "A"/"b" voltage correlation
P2135(2) Generic pending throttle

PaperLace:
Awww, cute bobo.
They're so innocent, till they fall in love_ their brains will just enter neutral...

Adebayofca:
Good Morning GAZZUZZ, my Honda Accord 2003 vibrates alot in traffic. I noticed that the RPM moves from 1 to 0.5 once i shift the gear to Drive. The car does not vibrate when gar is shifted to park. i have changed the engine mount and there seems to be no improvement. kindly help.

Thanks

IamRespected:
Hi, what you just said, I experienced such in my car, bro forget that brake whatever, it is wheel balancing and alignment, the reason why the first one did not work is because you went to the manual whell balancing and alignment, look for where they do computerised whell balancing, that will definitely solve the problem

iamdisappointed

Jdesigns:
In December last year, two different client was at out diagnostic workshop with their Nissan pathfinder Complaining of the Engines giving them issues and they have changes the car engine before now and needs us to try seeing what can be done.

After proper diagnosis of both SUV Engine, both engines have knocking sounds when the engine is running with the production of black smokes and we have two options, either to buy another engine or rebuild the existing VQ40 engines in both cars which is the main core of our business. (Rebuilding/ overhaul of engines and transmission with quality OE parts)

In the rebuild we decided not to use a standard rings for the rebuild but use a .50mm Piston rings size because we not too sure of the space within the engine blocks cos we didn't open up the engine and we will be importing all parts to be used, so it's easier to file down the piston rings if it's bigger than we purchasing a standard size piston rings and the fitting would be wrong.

The parts purchased for the rebuild are;

- Nissan 4.0L VQ40 (.50mm) OE Piston rings made by Nipping Piston Rings of Japan
- Nissian 4.0L VQ40 Main Engine Bearing (std) OE made by CAP Certified Automotive Parts Inc
- Nissian 4.0L VQ40 Connecting Rod Bearing (std) OE made by CAP Certified Automotive Parts Inc
- Nissian 4.0L VQ40 Thurst Washer (std) OE made by CAP Certified Automotive Parts Inc
- Valve stem oil seals made by Fel-pro of USA
- Denso Iridium Plugs
- Tough Guard Oil filter made by Fram
- Valvoline SYNpower 5w-30 engine oil.

diportivo:
A whole lot of unmetered air

Gazzuzz,wldnt u rather buy this

Escabado:
Hi Mavrodians, serious pairing going on. Almost every one is being matched to PH or GH, No more small talk, its action time.
For the many people calling me every minute of every day asking if mmm is truly back or not and wondering whats going on, now is the time to show that YOU and I are d MMM, whatever we do from now determines if mmm will be sustained or not.
go PH and GH, then PH again. Mavrodi no go dash u his own money to sustain d community. If u are to PH, do it fast today, dont wait till monday. If u are d GH, after ghing, then PH again!!!. Todays list is too long, i cant write it down, na screenshot i go do. Check to see if u or ur downlines has been matched.

THE KEY IS THIS

DON'T talk bad about mmm in the public because your Gh is someone else's PH .if you talk bad about mmm in the public you wouldn't know if the person that will pay your Gh is there and by talking bad of mmm you have destroyed that other person's good mind in mmm and at last nobody will pay your Gh.so Keep speaking good about mmm in the public and soon you can Gh and be paid. i see mmm nigeria entering into 10million active & serious participants this year 2017

✍�✍� *Guider YINKA*

delaw4u:
Tanx gazzuzz this happen when I depressed my brake to slow down for the normal speed but during speeding nothing of such occur
At 1st I thought it was alignment though the ball joint has I changed it with tie rod and the driver side shaft that was making noise but still I still notice the steering shaking when I tried to slow down the car either for bump or on normal driving
So could it be the brake disc or brake pad?
Tanx

Gold45:
I want to buy cars from the custom does anyone know I can go about it?