₦airaland Forum

Phoenix3000:
Can the Eco3990es 2.5kva power a 1hp inverter ac, an 80L mini fridge and a Tv Set

Yes it can. The gen is actually 3.75KVA/3.125KVA Starting/Running. I think you meant 2.5KW.

Allurex:
Hello House,

Good afternoon


Please I need a 7.5kva generator. I am torn between a Sumec Fireman and a Thermocool.

Please which do you advise.

Any of them you get is ok.

leppyj:
Redmi note 10 pro

Its practically a downgrade.

Myzubby:
okay see it here

Change to 3G and try again, network has been unstable for a while now.

Exumal:
I've gotten elepaq SV6800. Rated 4.5kva. performed well during test today. I couldn't afford the kemage, it's quite expensive. Thanks sir.

Uwc.

edimolu:
Thanks for your response.

So if I'm correct the gen will conveniently power only either 1.5 hp or 1hp inverters right?

Cos I don't want to make the mistake of getting an a.c only for my gen not to power it. Plus, can it power a 1hp non-inverter? Cos these a.c with inverters are fvcxckin expensive.

I really appreciate your response

Its better to invest in inverter ACs. It should carry the 1.5hp.

Exumal:
Good morning wisemen, My budget is 140k. I need a gen that can power a double basket fridge and a 1hp pumping machine at the same time.

Budget around 200k, you need at least a 3.5 kva generator.

edimolu:
So I finally got the 4.5kva elepak generator. But the problem here is, it can't conveniently power the 1.5hp a.c at home. I have to switch off all the lights, virtually everything. And wen it's powered and i put on few lights the gen's circuit breaker goes off within 20 mins. And the gen would hv been unnecessarily hot including the tank.

But without the a.c being ON, the gen powers everything including the big deep freezer. It's a big house with 2 living rooms and 5bedrooms. The gen powers it all conveniently without any wahala.

So I talked to à generator engineer and he said its because the LG is an old model with a high compressor, so it requires much energy from the Gen, that if it was a new model, it will power it without hassle, cos the new model, it's compressor requires less voltage.

Pls how true is this?

Don't use the gen for the AC again, you'll get the coil burnt. Your engineer was trying to tell you about inverter AC and yes the generator will power it. Your main issue is that the generator is not 4.5 KVA as claimed, its way less , say 3 - 3.5kVA.

whogatti:
tigmax or sumec

Oooo, you have not bought yet, go for Sumec 2.5kva.

tipsy242:
Pls will my Sumec SPG3000 carry a 1.5HP Hisense inverter AC conveniently??

Yes it will.

Ramon92:
Hello people

I'm thinking of getting this gen and would need help with the review of this Tec..
What's the noise level like and the general performance?

Gptech

Some users say its high, some say its normal. You have to tell them to test it for you so you hear yourself.

2felix:
Ok

Check, this is from the user manual.

2felix:
But it will not affect the durability of the gen or the electric appliances pluged if the frequency is below 50?

Just do the right thing to avoid stories. Don't you notice the generator run smoother when running at 50HZ?

2felix:
Thanks boss
But is there any consequences if the frequency is below 50? Now that i increase the frequency, the sound The a little bit louder

Yes it should be a bit louder. I think the only consequence is the engine will run below specified speed which means engine is not running at full capacity.

saint2ace:
Anyone with a solution please.....

What do you load it with that makes the voltage drop? You should contact firman service centre to get the very AVR you seek. The dropping voltage might even be from your new AVR.

2felix:
Have opened and adjusted it. Frequency and voltage now 50 and 230 respectively.
Once again, thank you very much.

Very nice! Will be better if you can make the frequency just over 50 so you won't need to be checking always. 50.7 to 51 is not bad.

2felix:
Thanks

Uwc.

dgee1:
Hello boss, I want to replace the engine of my gen, please can you recommend a place where I can get an original Sumec half-engine?

You can check an accredited dealer near you or check here http://ng.sumecfirman.com/index.php?m=content&c=index&a=lists&catid=16

Folahanmi19:
Anyone please

What kind of gen? Might be too much oil or actually the piston and rings.

Zingerpay:
Hello Engineer

Can you tell me about the iTec 3.5kva gen. How good is it? In terms of capacity how good is it. How about its efficiency?

Please help me out, i dont want to make mistake. The price is 142k on Konga, which still align within my budget of 150k.

Is there a better alternative for the 150k, I will appreciate the quick feedbacks.

Some persons say its good but I don't have first hand experience with it. Maybe you should seek the counsel of a trusted engineer ( not seller) . I can only recommend Sumec and Thermocool for now.

2felix:
My gen is tec major , how can the voltage be increased from the avr? Cause the technician i spoke with talked of changing it totally

You have to open the coil side of the generator to locate the AVR, you can check YouTube on how to adjust it. Sylva1 did it himself, you can check the previous page for his post.

Moziano22:
How much can I get the mi 11 ultra
And where, any sure plug?

Contact Macbeyland.

Moziano22:
Are they all flagship, what about Poco f3

Yes they are. If you are purely concerned about performance only, the poco f3 is not a bad choice.

2felix:
Is there any connection between the running speed and the voltage? Because the frequency is 45 while voltage is 186. Will increasing the speed improve the voltage?

You should increase the speed to 50 but it will not improve the voltage because of the AVR. You should increase the voltage from your AVR after increasing the frequency.

donforeign:
if u have any seller for mi9t batteries please let me know, thanks

Contact Macbeyland.

Moziano22:
Hey guys, I'm using Redmi 8 and iPhone 11, I want to sell my iPhone 11 and use a better xioami phone, please which phone will you guys recommend for me, I'm a heavy user tho,

Mi 11, Mi 11 ultra, Xiaomi 12, Xiaomi 12 pro. Pick any.

ikcid:
It was working optimally today, suddenly I picked it up from my workbench and saw it in that state. It didn't fall on the ground (the crack on the screen has been up to 8months)

You'll have to leave it till the battery drains. Open the back cover, remove the battery connector, put it back and then charge. You can check YouTube on how to do this. You might just be lucky.

ikcid:
Boss how do I get this solved on R7?

I've tried

1. pressing power button + volume down to boot into fastboot and then press power button+ volume down for 14 secs, then removed my hands immediately it went off. But the problem still persists.

2. I've tried rebooting by pressing power +button up, but it's still stucked on the boot screen

3. I tried wiping off data then rebooting to system. It's still same issue.

What next do you suggest?

What led to this?

2felix:
What do i if the frequency is below 50

?

You'll have to increase the running speed until the frequency gets to 50.

donforeign:
u cn send me link for the amoled screen n battery for mi9t on aliexpress

Shiping fees for batteries are very alarming, better to contact sellers here.

shosky1794:
My Note 4 still kicking it. That phone should be the best Redmi phone ever made

Nr b small .

babyfaceafrica:
Good morning

Xiaomi 9T Vs 10c.... Which is better please?

Erase the Redmi 9t from your memory, look for something else. What's your budget?