₦airaland Forum

Generaloluseye:
I want to ask whether a 3.75 kva gen can power a 1500 watt iron without issues.

Yes it can.

oneroflo57:
Pls guys in the house,does hier thermocool show rooms sell half engine?
If no,where can i get genuine hier thermocool half engine in lagos on the island

Go to their service center.

micynute94:
Done that too boss

I noticed there is debris inside the tank.. Like a sand residue of sort.

Could a dirty carburettor be the reason?

Called a technician and he said he will service the carburettor tomorrow.

As at now, I have to switch off everything just to power the AC. My neighbor uses the same gen n powers two AC at the same time with no issh.

If you can locate their service center near you, its better to take it there. A dirty cab can make your generator behave as you describe though because if enough fuel is not allowed into the combustion chamber, then enough mechanical power ( horse power) cannot be produced to power heavy loads.

micynute94:
Boss,

The issue keep popping up o every now and then even after increasing the speed.

After 10 - 25 mins, the gen starts vibrating madly n screaming as if it's on its way to the gallow.

Once I put off the AC, everything goes back to normal.

Except at night where it sometimes works just fine.

Same thing this morning when I ask a gen repairer to come look at it. He just increased the speed and everything works fine for like 10 mins before putting it off.

Tried to switch it on this afternoon and it started its Jack Sparrow Dash.

Anything I'm missing here?

If I'm correct, the black plastic screw behind the carburettor is the one I need to tighten as I've tightened the one that looks like a metal gold screw.. Yet no change

Its strange because it normally powers 1.5Hp non inverter AC without this issue. Check the Voltage reading whenvever you experience this again. This is the screw to tighen.

Obere4u:
Please is there thermocool gen of between 50-60k, if not which other product can you advise someone to go for that's between that price?
Thanks

Nowadays na money for better pass my neighbour b dis. Generators are very expensive now.

NobleEngineer:
Hello everyone, pls how many litres of engine oil does it take to run this generator?

Should be around 1.5 to 2 litres. You can just measure two 1 litre cans of oil and fill till its topped to get the exact capacity

Flamees:
Omo you just Changed my mind from buying the Note 10
So u mean we shouldn't update it?

Buy and update your phone jare. These are just rare cases with Amoled display. Happens to any brand not just Samsung. Millions of people update their phones without any ish.

Ambihill:
Good evening House!
I removed the oil filter cap of my ECO49990ES and the oil poured out. Does this mean the the oil is is over gauged? Note: the gen was on a level surface.

Thanks for your responses

Leave the oil filler cap opened and allow the excess to pour out. When its no more pouring out, its guaged, you can then cover it.

Ajet12345:
Please I got this Elepaz constant today for my 1.5 hp AC
Please can I use its to also power my fridge at the same time

Yes

micynute94:
Hello everyone... Pls I need your help o...

I've been using the Thermocool 3.75kVA gen for the past 2/3 months now and everything has been working fine until I started using a 1.5AC inverter HiSense with it.

It gives this "vibrating" sound like it's about to go off.

My neighbor uses the same gen to power two AC and it works fine.

I don't where the problem might be coming from.

What else do you power with the AC? If your generator is the blue one, what's the frequency? If it's the yellow increase the running speed.

DoggoneDogg:
Care to explain why they have different displacements but same KW?

You'll have to do some reading on Google. Power is not just a function of engine size, the coil matters too. Same thermocool has generators withe same 210cc but power is 3.75 and 2.5kva respectively. You'll see Firman with 270cc and 196cc with same power of 3.5kva. The bigger the displacement in cc or litres ,the bigger the horsepower produced and the more the fuel consumption.

Vikkypee:
Hello all, please kindly advise a good generator that can be effective with a submersible or normal pumping machine. I saw a Senwei 4.5kva on Jumia, I am not sure if it can do this job.


My budget: 120k to maybe 150k.

You did not state the power of the pump. You'll need to raise your budget abit.

DoggoneDogg:
Professor, how is it possible that Sumec Firman has 270cc engine and Thermocool 223cc engine for the same generator of 3kw output??

Does this mean the Sumec is more powerful??

Not necessarily true.

Ambihill:
Please, getting 10w-30 in Warri is a herculean effort. Can 5w-30 be a substitute? Thanks in anticipation of your feedback

Get 20W-50, this is Nigeria, temperatures will never go as low as 5degrees in Warri. If you are not comfortable with 20W-50 you can go for other weights like 10W-40.

chrisatah94:
Thankyou for your feedback. Please how did you identify as not original? I mean how will I differentiate original from the fake?

Check their website for antifake. As for the one you uploaded, its supposed to be 2.8KW not 2.8KVA, they are not thesame thing.

ogunlowoluseun:
Thanks a lot sir. I initially thought it was an extra. I got a battery person to fill it. He said to wait till tomorrow to start it.Recoil option is working.

Thanks everyone for the help and feedback

Uwc.

chrisatah94:
Good evening guys. Please can someone give review of this Gen please.
Also can it carry my 200l deep freezer, 1.5hp AC, and LED TV?

It won't power such AC effectively unless the AC is inverter type. Meanwhile this generator you uploaded is not original.

ogunlowoluseun:
Yes I did. It's 20W-50 that was recommended. I bought Total as I couldn't get Mobil around. Is it okay to continue with Mobil later on?

The engine start isn't working. I am not sure if I'm doing something wrong. I had to manual start before it came up. What could be the issue?

Did you install the battery properly? There's a liquid ( electrolyte) you should pour into the battery case before connecting it. If you can upload pictures, it will help.

ogunlowoluseun:
Thanks sir. It has been delivered. I called but they said they'll get back to me.

I am yet to unbox it. So I don't know the recommended oil type to by. That's why I asked the above question? I need to set it up today

Unbox and check the manual, recommended oil will likely be 20W-50.
Check under the gen around the engine block to get the engine number , that's what the customer care people should check.

remi1444:
Mobil is quite popular here.

Its good, you can go it.

remi1444:
Thank you. Maybe I should get the gallon(should be 3-4 liters).

That's what I do, its cheaper that way.

ogunlowoluseun:
Thanks sir. Do you mean the SKU number here? And is it something I should do before the dispatch person leaves?

Thanks

No, sku is for jumia. When the item arrives, there should be a serial number for it. Open it to see it.

Ambihill:
Hello Professionals in the house ! Please the recommended oil for Firman Eco49990Es i bought recently is 10w - 30. I saw products like mobil, prime guard and prime guard premium on jumia. Mobli is pretty pricey. Please is prime guard a good oil? You can as well recommend alternatives.

Thanks

Its not just about the name, the weight and Api value are more important. You can go for Total 20w-50.

Ambihill:
Please, in the addition, the Eco49990es fuel consumption is quite high. How do i reduce it?

How long does a particular litre of fuel last you? What do you normally power with it?

remi1444:
2— what’s a good oil changing interval based on hours. Generator doesn’t take much load, an SPG3000 powering a table side fridge, fan and charges laptop and max 5 phones?

3— what’s are your standard oil products that you can suggest. I’m currently using SEAHORSE.

Oil change should be between 60-100 hours max. Assuming oil standards are same, you should be looking at SAE 10w-30 or 20W-50. The former is really pricey. You can go for either Mobil or Total.

debowale2015:
Good evening prof and all other experienced fellow here.

Just need a sincere advice to my question.

My Gen(Lutian 2.5kva) has developed all kinds of engine related problems thereby giving me an impression of wasting money in terms of repairs. Ots either valve today, or carburettor. Currently it shortens oil and I have been consistently repairing it even after ringing it months ago.

A street GEN engineer(repairer) wants to sell an half engine to me for 20k. He said the engine was removed out of a GEN with bad coil.

Should I risk buying the half engine from him or I rather buy tokunbo(new engine) or I rather safe up expediently for a new GEN.

Note; my current GEN coil has not been worked on before safe changing of AVR and brush sometimes ago.

Half engine for 1.8kva is currently far above 20k let alone for 2.5kva. Better to count your loss and get a new generator before dem take you shine again.

ogunlowoluseun:
Just seeing this...

I also just ordered for the thermocool bobo 2800ES from jumia express. It's currently not in the thermocool store and several other vendors I checked with. I however called their customer care to confirm it's availability before processing the order.

I'm hoping I made the right call. I needed a generator urgently and it seemed like a good fit.

When it arrives, call the customer service again to confirm the serial number.

BuyAndSellStuff:
Okay.
Too bad though because the gen is pretty.

Just confirmed that there's electric start for it, you'll need to go to their stores to see it. The picture you posted confirms it but their website is saying otherwise.
The Es in the model name confirms its electric start. Their website nor get head.

BuyAndSellStuff:
Electric start of the same blue 2.5kva?? Not the blue 4000ES...

Sorry, I made a mistake, there's no electric start for this. The picture they used for the advert is misleading.

Dedewizzy:
Greetings house,

I intend getting a TEC (Haier thermocool) generator online, konga precisely since thermocool's showroom is quite a distance from my present location. Konga offers me a home delivery and price is less than what the physical showroom has to offer. Is a a wise thing to do?

Kindly advise..

CC: Gptech

Generally not a good idea to buy generators online. If you must go ahead, call their customer care line so you can send them the serial number to confirm its genuine.

BuyAndSellStuff:
Omo
Fine gen like this?

There's electric start, its more expensive.

BuyAndSellStuff:
Just 9 months?? I thought they said TEC is the best?
Lol

The best? One of the best in the Nigerian market is a better way to put it. If you misuse any generator no matter the brand, same thing will happen.