₦airaland Forum

Englandboy:
I put my gen on a test before u reply my quote and I tried it with my a.c for about 30 minutes with my gen it works ,but it slow in cooling not like electricity power. It written there in the generator that it has 6.5hp will my a.c is 1.5hp non inverter , I still don't understand why I can't use it with my a.c please put me through.

Please read.

toluxa1:
That's one of the reason's I'm hesitant. But should it still be consuming alot of fuel even when there is minimal load on it? Like just lights, fridge and freezer? Maybe a 1.5hp inverter AC Sometimes

Yes, it will still consume high. The engine is big so its natural for it to consume more fuel. Since he has already agreed for 300k, buy it and maybe sell if your usual load is what you posted. You can even sell it at a higher price and get a smaller gen like 3.5 to 4.5kva that will meet your needs.

toluxa1:
Thanks. This is the reciept. He bought it 559k last year.

Some people rough sha, just a year! Would have doubted if not for the receipt . Its a good deal though, but I hope you need such power if not you will be spending more on fuel.

fijiano202:
han han....

HP kVA
1 HP 0.933 kVA
2 HP 1.87 kVA
3 HP 2.8 kVA
4 HP 3.73 kVA
5 HP 4.66 kVA
6 HP 5.6 kVA
7 HP 6.53 kV

Original 3kva suppose carry am . But stats for pumping machine are so different from everything above

Don't go and kill your generator oooo. The conversion you posted is direct mechanical power conversion, doesn't work like that in generators because of lots of losses. The Sumec Firman SPG3000E2 for instance has an Engine power of 6.5 HP but its a 3.5kVA (2.8KW) generator. If we go by your calculations, it means the SPG3000E2 is a 6.45KVA generator, even Sumec sef go fear .

SuprymBean:
Hello. Please Can a 1.8kva senwei sp3800 carry a 2hp Water pump

Even a 3kva generator cannot do that.

billyfranc:
Please you guys should help me out

For this size, buy Tec junior.

atheistandproud:
Waiting to book my space for page 9000.

GPtech
Grandmufti
Genius43
Olayinkajnr
AuntyFibo
Skywalker240
SunshineV
DRJprince
DDdjay
Et Al

Make una show face oh.

And we just dey enter house. The kind faces when show for page 9000 na wa .

BuyAndSellStuff:
Before load:
V:233
F: 52 - 52.8

On load:
V:231
F: 51.7 - 52.2

These stats are same as when the noise was calm.
Load is just Fridge, TV, Home theatre, bulbs.
The sound today was worse. Just like a gen of more than 1year old. The white puff of smoke came out again during startup. Could it be oil? I use the yellow Conoil Golden Super.

Open the oil drain cover and see if oil pours out, if it does, then there's too much oil which can lead to the problems you face.
You might also need to change oil completely, will advise total or mobil 20W-50.

BuyAndSellStuff:
Hello professors

Something funny about that blue TEC Optima gen I got 2 months ago.

Nowadays, I noticed the noise is slightly deeper like a growl although its not harsh. Just slightly deeper than the first 2 weeks I got it.

As at 3 week ago, I noticed that when I turn it on, it exhales some white smoke first. This also happens when I switch off.

I thought it may be oil so I changed oil even though it wasn't low yet but its still happening. I then thought it was the air filter and found out it wasn't even dirty at all when I opened it so I put it back. So now I'm at a loss as to why these symptoms.

I don't want to wait till a major issue crops up. The VFT display stats are same as the first day I got it though just that deep noise and white puff of smoke that I don't understand.

Can you tell me a reason why these could be happening or am I overthinking it?
Thanks


Gptech aieromon fashrola nwaozzugwor earthrealm make una helep me

What are the stats in the VFT display? Before and after loading.

samsard:
Who's gptech?

.

alickdavid:
Sold to Eliona and escrowed by Gptech.

Nice!

pkkpro:
Hello please how do I lower fuel consumption on my SPG 8000E2?

How many litres does it consume in say an hour? Or how long does say 1k fuel last? This is a big gen and it naturally consumes more fuel than smaller generators.

syntekelite:
Its a 2.5kva , the engineer said both the coils are damaged.. and he will change both for 40k..he later brought a buyer who said he can buy the gen for 10k.. i said no thanks i would rather repair and keep using.. reason for wanting to sell is cos i have three gens, 2big and 1small.. but i would rather repair than sell it cheap cos of the ruggedity and originality of the gen,it doesnt make noise, never gives trouble, thats why i brought the issue on here,cos its only this one engineer thats been servicing it..
Note- the gen starts with just one pull, but it isnt bringing current,hence the engineer's verdict that both of the coils is damaged..

Get another engineer to access the situation as advised and if truly the coils are bad, it's better you get new coils.

nwaozzugwor:
There is nothing like capacitor in 3.5kva ...it uses AVR ..

Check the following..

The AVR
The brush
The small coil in the middle
The big coil

These engineers sef, avr and capacitor in one generator, smh.

Gemineye:
I got this Sir

Ok download from here. Download the recovery rom, its 2.87 gig.
https://miuirom.org/phones/redmi-note-9#Global

Gemineye:
RN9 sir

You already have the latest rom, anything more recent is likely in beta phase. You can screenshot the rom version if the update is still available.

Gemineye:
Here Boss

What's your phone model, you already edited the name.

Gemineye:
Please where do I download updates manually from?
I got an OTA update notification, downloaded the whole tin but it's not installing. Want to try and do it manually

Screenshot your about phone.

blaqorbit:
Good day guys, I bought 2 new Airtel Sims since I changed location. Put one in my redmi note 9. There's network and 4g but it won't browse. The other sim in a Samsung is working well. Please any settings needed to fix this? I need that redmi working asap

First swap the sims and see if it works on the Samsung.

SolomonGrundy:
Thanks for your response. I saw this attached to the gen, although I couldn't find 15W/40 oil.

Check your manual for the API level. You can get other oil weights like what you posted or 20W-50 but the API level should be met

SolomonGrundy:
Greeting gen profs, can this oil be used for tec junior?

Look at your manual and check the API level. This particular oil is not suitable for the Hustler. API levels with higher alphabetical order are higher. For instance, SH is higher than SJ. You need something equal to or higher than yours

Optimisticjayy:
It actually powers it now… I said I’ll update you yesterday but I forgot… I didn’t even have to increase the speed again… the generator powers it with my refrigerator and tv together without any stress… thanks for the tips boss��

Uwc, I don fear say u don go buy fake before .

WarriAproko:
i have been there many times. They don't have parts there. Even call them 2 days ago. They said even if they have it they will have to get it from their lagos office. Parts are scarce there. I was recommended to use fireman carburetor

Yes, parts are scarce, but they should be able to get you an original Firman. They repair Firman generators too.

Optimisticjayy:
Yeah my engineer increased the running speed from the carburetor but when I put off the ac, the speed was way too much; almost like the engine wanted to explode so I had to reduce it… is there any other way I can increase it without those effects?

Means you have been overstressing the generator, you shouldn't bother using it with the AC, actual power is not up to what is written on the generator. A 3.5kva generator should power even a 1.5HP inverter AC without stress.

WarriAproko:
Pls i want to buy a Carburetor for my Heir Thermocool optimum generator. How do i know a good one. Please it is urgent. All the Prof in the house direct me to the one to buy. The gen repairer recomend fire man. But i need a better advice here

You stay at Warri right? Carry your generator to their service center close to GTB by refinery junction, they have it there.

Optimisticjayy:
Good morning house… I installed my hisense 1hp inverter ac and tried powering it with my Itec 3kw generator… it powered it but after sometime, it starts dragging the generator… pls what can I do about this?

Turn off other appliances when using it. You can increase the running speed if its low too.

gozie186:
Good evening House, please my new generator refuse to start automatically, I don't know that really is the problem. Is the battery dead already or should I get a new battery

I hope you didn't leave it out in the rains, otherwise, it's possible your battery has issues.

saint2ace:
I have a gen that outputs 187v, I changed the AVR and it's still outputting 187v and under load will reduce to 185v.

Will adjusting the AVR solve my problem or there's a bigger issue?

Thanks in anticipation

Try and adjust it first.

muyoge:
Thanks so much for the prompt attention.

Maybe increasing it from 210V to 240V would power my appliances better. I know I can also turn a screw on the carburetor to increase the speed and power.
Now I want to know which one will save fuel better.

Thanks in anticipation.

210V will not power some items properly, so yes, adjust the AVR to read between 220-230V. Forget about fuel conversation, so long the running speed is ok.

muyoge:
Good day sir.
Pls I want to know whether adjusting AVR will increase fuel consumption.

Why do you want to adjust it?

Odunharry:
Lol. I'm Suprised with his Note 4 camera better than note 8..

The thing weak person really.

Hamachi:
Deep freezer (tokunbo) of 130 watts
2 white bulbs
A ceiling fan
Probably a TV (not necessary)

A 2kva generator like the Sumec Firman Spg 2500 should do