₦airaland Forum

Welcome, Guest: Register • Login • With Google • Trending • Recent • New

Stats: 3,346,277 members, 8,522,122 topics. Date: Friday, 20 November 2026 at 03:39 PM

Toggle theme

Honmusa's Posts

Nairaland Forum › Honmusa's Profile › Honmusa's Posts

1 2 3 4 5 6 7 8 ... 16 17 18 19 20 21 22 23 24 (of 59 pages)

Car Talk › Re: P0500 Solution by honmusa(m):
mayor2013:
I doubt if it is so on the camry 2003. I know of the sienna 1999
It is like that on the PZEV model of Camry which is why I said he should scan the abs modules first to confirm .
Car Talk › Re: .. by honmusa(m): 10:33pm On Jan 08, 2017
bgmoey:
Greetings to veryone on this forum.

I recently bought an 09 Accord, and after scanning it, i get a P0420 error code - Catalyst system below efficiency.

I got my panelbeater to open up the exhaust system, and saw that the catalysts are all gone. Car sounds louder (turbo sound) and consumes fuel. Highest i get is 17mpg. What would be the cost of changing the 2 catalyst, and i only noticed a single o2 sensor (back of engine), i always thought the car has an o2 sensor close to the catalyst system underneath. Pls advice.

I also hear there's an option of using an o2 spacer to fool the car, and get the error code off. What do you suggest, as i am trying to save cost.

Many thanks
From experience ,absence of catalyst doesn't really make such a significant impact in your fuel mileage ,the primary purpose of catalyst is filter out the dangerous and toxic emission and is compulsory in developed states where there are strict emission law.If you are mindful about cost ,use a spacer to remove the catalyst code and take your car to a professional diagnostician to diagnose your car for other issue that is responsible for the poor fuel mileage like faulty o2 sensor, stuck open thermostat,VTEC issue, open loop conditions etc .
But if you still want to change the 2 catalyst ,budget around 150k .
Car Talk › Re: .. by honmusa(m): 10:32pm On Jan 08, 2017
bgmoey:
Greetings to veryone on this forum.

I recently bought an 09 Accord, and after scanning it, i get a P0420 error code - Catalyst system below efficiency.

I got my panelbeater to open up the exhaust system, and saw that the catalysts are all gone. Car sounds louder (turbo sound) and consumes fuel. Highest i get is 17mpg. What would be the cost of changing the 2 catalyst, and i only noticed a single o2 sensor (back of engine), i always thought the car has an o2 sensor close to the catalyst system underneath. Pls advice.

I also hear there's an option of using an o2 spacer to fool the car, and get the error code off. What do you suggest, as i am trying to save cost.

Many thanks
Car Talk › Re: P0500 Solution by honmusa(m):
depair:
Got a p0500 on toyota camry 2003
vehicle speed sensor
tried locating it on the gear housing but i dont think i did


speedometer not functioning properly erratic shifting of gear and sometimes not changing

kindly proffer solution
Scan the abs module for wheel speed sensor issue and if there is ,then take care of the abs issue and the p0500 will be resolved .For most toyota ,DTC i pointing to vehicle speed sensor is actually referring to the abs wheel speed sensor and it is the same wheel speed is the source of speedometer signal .
Car Talk › Re: Engine Shut Down When In Motion. by honmusa(m):
snipesdam:
You're just a pain in the Ass. If you read carefully I rigged the wire, I fixed it with instructions.. Watch your tone!

I already plans to buy new fuses to replace the bad ones. Thanks to GAZZUZZ.
sorry sir I won't say anything again !!!!
Car Talk › Re: Engine Shut Down When In Motion. by honmusa(m):
snipesdam:
Wells

Thanks man I called two good electricians in PH and they both told me check the fuses. So opened up the fuse box in the engine room, pulled out the small fuses 10, 15 and 30amps one after another checking them and adding a wire to it if necessary. So I identified two fuses which when pulled out the CHECK ENGINE AND BATTERY light goes off. I think that's where the issue was coming from. So fastened it back in tight.

This was done with the ignition On so I could isolated the trouble fuse.

Drove around for 15mins no issues. Am back to base for hustling in PH. NO issues on the road.

Thanks for all your contributions.

Note it was never a ground cable issue.
Your car has been kazeemised !!!!
What is the essence of adding wire to a small fuse done by so- called best electrician in PH,doing so has already defeated it main purpose of protecting your circuit ,and why isolate the issue by removing a fuse instead of drilling down to resolve the issue.That is totally inappropriate and unacceptable procedure of troubleshooting cos your electrician are working blindly.
For your information ,any fuse removed is a source of power source to other circuits in your car so your issue seemly resolved has already opened door to fresh issues so please don't complain if u start getting fresh issues.
Car Talk › Re: Pinging Sound When Applying Pressure On Motion by honmusa(m): 10:10pm On Jan 06, 2017
Hayjaycity:
I keep saying it... Your hunger no be here o.. Don't worry.. E go better, how much be scanning for your "workchop"?
Car Talk › Re: Pinging Sound When Applying Pressure On Motion by honmusa(m): 10:06pm On Jan 06, 2017
stellarsfinest:
Please can anyone help what I can do to stop my car from making ping sound while I apply pressure on motion. I drive a jaguar x type 2003. Some said I need high octane fuel. Some said ignition timing issue. Some said engine temp stuff. Pls can u help?
.
If you are in Lagos ,I will give you a free diagnosis if you can make it to my workshop @Gbagada by next week.
Car Talk › Re: Pinging Sound When Applying Pressure On Motion by honmusa(m):
Hayjaycity:
I keep saying it... Your hunger no be here o.. Don't worry.. E go better, how much be scanning for your "workchop"?
Lastly ,I am proud to state that through this platform ,I have
be able to resolve many issue that I cant even keep count of
and there is a lot of feedbacks from such people showing
gratitude as I can readily dig out such thread .So show me
any evidence of anybody that you have helped with your so
called automechanic skill that OANDO has gracious
sponsored you if it is not a waste.
Car Talk › Re: Pinging Sound When Applying Pressure On Motion by honmusa(m):
Hayjaycity:
In case you don't know.. I'm a fully trained auto technician Dat got a comprehensive training with Auto-medics Ltd fully sponsored by OANDO... Im not arguing with with what u posted in your epistle, you are very much right... What I'm saying is I have observed over time from your past post Dat you Ave never proffered basis self solution to people's issues on deir vehicles here, you will rather ignore if it has nothing to do with such scanning which you can make money from. That's what sets GAZZUZZ and co apart.. Many people have learnt a lot from them without seeing them one on one.. I'm not a full fledged practicing auto technician though, but there is nothing anyone here canl mention in auto related issues that I don't know..
OANDO as really wasted money sponsoring somebody like you for training .What is your contribution to the ops issue at hand ?Nothing .Instead prefer to be ranting anyhow and derailing the thread .If you don't have anything to contribute why don't you maintain silence and make space for intelligent contribution cos if you have something upstairs as claimed ,you would have mentioned something for the ops to hold to .
Secondly ,I have already nailed the direction for the issue to check by going for diagnoses so if you are trained as you claimed I am sure LJ ,Ben and Kunle will never be proud of having such a dull student passing through their system cos this kind of issue is too simple for their student not to know the first procedure in handling such .
Lastly ,I am proud to state that through this platform ,I have be able to resolve many issue that I cant even keep count of and there is a lot of feedbacks from such people showing gratitude as I can readily dig out such thread .So show me any evidence of anybody that you have helped with your so -called automechanic skill that OANDO has gracious sponsored you if it is not waste.
Car Talk › Re: Pinging Sound When Applying Pressure On Motion by honmusa(m): 9:43am On Jan 06, 2017
Hayjaycity:
Even if he went half savage.. It is obvious my guy is still a savage.. Hungry man.... The truth hurt him badly.... Help me ask am my Keke napep too dey ping if I apply pressure, should I come run a scan for hin workshop? !!!
You are just too ignorant ,maybe I will need to tell you the place of diagnosis/scanning in treating the issue.
Pinging is experience whenever there is imcomplete combustion of charges (air and fuel ) probably due to insufficient or too much of spark or due to extremely rich or lean mixture .
Diagnosis :Check for presence of extremely rich or lean mixture with your scan tool live data stream .
check for presence of ignition misfire with scan tool or oscilloscope .
Car Talk › Re: Pinging Sound When Applying Pressure On Motion by honmusa(m):
Hayjaycity:
why be say all ur own na run a scan..cant u make meanignful contribution to help a nairalander in need of advice or assistance...this your hunger no be here o...emulate gazzuzz, nurey, mayor and co jare.....
You are too dumb to understand simple analysis
I have already spelt it out (air ,fuel ,spark ) ,so do u still need somebody that will minute- feed you with by mentioning all available more than 100 spare parts that is connected to a power train system .Obd2 management has simplify issue for you .If you are illiterate on obd2 system go for training instead of encouraging trial and error of mentioning of parts .I dont encourage mediocrity and waste of time and resources .my aim is speedy resolution of ops issue with the least resource at the shortest time as possible, I don't owe you any any long epistle .
Car Talk › Re: Pinging Sound When Applying Pressure On Motion by honmusa(m):
stellarsfinest:
Please can anyone help what I can do to stop my car from making ping sound while I apply pressure on motion. I drive a jaguar x type 2003. Some said I need high octane fuel. Some said ignition timing issue. Some said engine temp stuff. Pls can u help?
Run scan on it na to see if u can get any clue cos the issue is between ignition ,fuel and air (air leak )
If you are in Lagos ,u can take it to autologic @Gbagada for professional diagnosis.
call 08061166316.
Car Talk › Re: AUTOMEDICS' Automotive Mechatronics Training Programme by honmusa(m):
linobrown9:
Good day guys pls i want to knw the cost of the training for pure mechani. linobrown9@gmail.com .thank u....am a graduate of mechanical engineering... I was interviewed yesterday, i can only be employed der only if i am a satisfied auto-medics.
If you are seeking for the best ,go for
Autologic Autodiagnotics and Autoelectrical training.
Professional backed with scientific approach to diagnosis and resolve issue without removing a pin inside the vehicle.
Logical analysis to diagnose and resolve issue @ fastest possible time
Modern and 21st century state of the art diagnostics and electrical equipment .
Fully practical oriented training methods.
I am yet to see any automotive training that is so resourceful ,others are all learners
call autologic @ 08061166316

Car Talk › Re: Honda Accord Wont Start. Please Help by honmusa(m): 9:27am On Jan 04, 2017
gabito4luv:
I bought a Nigerian used Honda accord 2003. travelled with it to Benin last week. stopped at Ore to refuel and vehicle refused to start. Got an auto electrician to fix it. Drove some km and the temperature started rising got to Benin the gasket and water pump got spoilt. A mechanic just fixed the gasket and water pump but the vehicle refused to start. Only the engine and key lights are showing on the dash board. The mech suggested changing the brain box. but I.m not convinced. Guys any solutions to my problem.?
Your car has already been kazeemised and dont expect any resonable response to your question cos u didn't follow the right procedure before embarking on repair .Tow the car to a professional technician that knows his onion to properly diagnose and resolve the issue for you
Car Talk › Re: Honda Accord Wont Start. Please Help by honmusa(m): 9:05pm On Jan 03, 2017
Greene66:
Your fuel pump and radiator are bad. Also change your air filter and buy a new brain box also change the alternator and perform the wheel balancing and alignment for it.

The lights showing are caused by bad battery. You should buy a new battery
plz what diagnostic procedure have you conducted on the ops car to determine changing all this part you mentioned.
Car Talk › Re: Engine Shut Down When In Motion. by honmusa(m): 11:11am On Jan 03, 2017
snipesdam:
@Gazzuzz

MY Corolla 1.8 wants frustrate my waka this holidays., sometime in Early December 2016 I was in traffic due to the long engine idling, I turned it off when started the next time and moved a little it went of. I thought I had released the clutch to quickly and it went off so I noticed that the CHECK ENGINE , ABS, BATTERY AND AIRBAG LIGHT wasn't, showing up as normal during ignition. But radio and lights with windows were working well. After pushing it out of the way and touching many things it later came up.

So today I wanted to go and trail one babe in my villa just after pickup one I offered a lift. Gobe that same experience happened again Kai. I said to myself I hope this babe and her sister aren't witches. I started touching the battery heads which where tight few minutes later it came up. Thats when they decided to step out waiting for bike. So I dropped them halfway.

Now I turned to my own destination, I will be moving all of a sudden I will lose power and especially @ strategic places.

Dunno Why this happening ooo. What's the explanation for this.

Dunno if it's security issue or a place thats losing power contact. But somehow if I touch the positive battery terminal that has Earthing connected to it, it comes up.

This shouldn't happen when am traveling back to PH.
THANK GOD IT DIDN'T HAPPEN WHEN I TRAVELED TO Benue last Tuesday and came back same day.
You actually need confirm if the particular issue you are encountering has to do with your car losing performance I.e not delivering enough power or you're car is going off outrightly or both issue .
Car Talk › Re: Peugeot: Appreciation Of EW Engines. by honmusa(m): 11:02am On Dec 29, 2016
mili3kid:
alot of issues might cause it. have U tried to scan it?
Better choice of words will be "diagnosis" rather than "scan" cos there is nothing to scan in overheating issue
Car Talk › Re: Nissan Primera Wagon With Cvt Transmission by honmusa(m):
mitje:
Nawao! This is not good at all...@honmusa what do u think I shld do NW? Sell it off or?
If you can bring it to my workshop this week I can help you assess it
Address :Charlie boy bus stop ,Along Gbagada oshodi expressway.call 08061166316
Car Talk › Re: Nissan Primera Wagon With Cvt Transmission by honmusa(m):
mitje:
So. Is it that all hope is gone for the car? The guy who scanned is saying that once I get the knock sensor fixed d main problem will be solved then try to erase the other codes What do you think?
The guy that scan your car is just fortunate to own a scanner ,he is not in a position to advice toy car owner.
tell him to go ahead and erase and resolve the issue na.
Car Talk › Re: Nissan Primera Wagon With Cvt Transmission by honmusa(m): 5:04am On Dec 28, 2016
mitje:
So. Is it that all hope is gone for the car? The guy who scanned is saying that once I get the knock sensor fixed d main problem will be solved then try to erase the other codes What do you think?
Car Talk › Re: P0138 by honmusa(m): 7:46pm On Dec 27, 2016
leorayvon2k2:
So mech needs to check it.. cos evrytime I scan same code throws up
Not road side mechanic o ,patronise a professional learned technician or if you are in Lagos,u can call autologic @08061166316
Car Talk › Re: Maintenance Tips For Honda Cars by honmusa(m): 3:35pm On Dec 27, 2016
victoremeji007:
Please help.
Have you make any attempt to scan the car if you can come up with any clue .
Car Talk › Re: Nissan Primera Wagon With Cvt Transmission by honmusa(m): 3:29pm On Dec 27, 2016
mitje:
Hi everyone. Please I need your expert advise on the above car. I have the above car with CVT transmission. Since I got this car there is this particular problem: the car drives well when it is cold but IMMEDIATELY it gets hot it will have difficulty changing gears and then suddenly begins to drive slowly.
I ignorantly took it to a road side mechanic who converted the car from injector to carburetor. Nothing has changed as the car still behaves like that. The mechanic said I should change the gearbox and get a new engine. Not fully convinced I decided to take the car for scan and all the codes are engine related- p0100-maf sensor, p0115-coolant sensor, p0325- knock sensor, p0180-fuel temp sensor, p0335-crankshaft sector, p1336-crankshaft sensor COG. Please I really need experts advise on the way forward. Thanks
The car has been terribly kazeemised .I wonder where u want to start from cos there is going to be tons of electrical rewiring by kazeems.Even if you change Tx ,the electrical would have been abused.
Car Talk › Re: Coolant Boiling And Temp Guage Show Temp Normal by honmusa(m): 12:19pm On Dec 27, 2016
eagleeye2:
Good one. But what could be the root cause?
A cooling system is supposed to be airtight and this is die to the fact that the pressure must always stay to increase the coolant boiling point .But if boiling takes place at atmospheric pressure then there is reduction in pressure which can be due to a leak .
Leak is not limited to the radiator alone ,it can be anywhere along the cooling system route eg heater core,hose clamps or internal leaks.
Special equipment is needed in most cases to fish out this leak .
Car Talk › Re: P0138 by honmusa(m): 12:00pm On Dec 27, 2016
leorayvon2k2:
How do I solve this code problems

Help
Bank 1 sensor 2 o2 sensor high voltage issue which indicates rich mixture or faulty sensor .Don't just go ahead to swap o2 sensor yet cos other issue might be responsible :
1.Stuck rich mixture eg stuck open injector,PCV issue,fuel regulator etc
2.O2 sensor wiring issue .
Car Talk › Re: Coolant Boiling And Temp Guage Show Temp Normal by honmusa(m): 11:19am On Dec 27, 2016
eagleeye2:
That's true. he may blow his top gasket unknowingly
Blown headgasket and overheating are both symptom of an issue related causing the overheating.. Assume you have a headache ,are you going to be treated for the cause of the headache or the headache itself ,headache can be a symptom of a malaria fever,stress itself.Treat the cause and the headache will go away .Likewise treat the issue causing overheating and blowing the head gasket and the overheating will go away .So stop treating symptoms,it is a waste of resources and time.
Car Talk › Re: Coolant Boiling And Temp Guage Show Temp Normal by honmusa(m): 11:19am On Dec 27, 2016
eagleeye2:
That's true. he may blow his top gasket unknowingly
Car Talk › Re: Nissan Altima Rebranded For Sale Just 750k Best Of Both World. by honmusa(m): 11:01am On Dec 27, 2016
CyberWord:
Nissan altima 2004 sweet ride with toyota camry thin light engine, gear box and brain box. Full option. Everything in perfect condition like toks.

Price 750000
Call 08034868232
Car is in warri, delta state
Camry engine inside Nissan altima and for your mind is in perfect condition?
maybe I will buy it and keep for practical lab work for my students to dissect the wiring for studying. Can u sell 50k??
Car Talk › Re: Thank You Gazzuzz by honmusa(m):
I use Nissan and love it .My Nissan never disappoint me as she always unleash the expected raw power and performance I always desire when I am on the driving wheel more than what I can get from any Toyota .I treat my Nissan well and she serve me faithfully in return .Treat your Nissan nice and it will serve you well. #Teamilovemynissan.
Car Talk › Re: Coolant Boiling And Temp Guage Show Temp Normal by honmusa(m): 6:15am On Dec 26, 2016
amosfunmi:
system has been bleed twice no result.

am trying a new radiator. Could anyone please help me with likely price of the radiator?
Thanking you in anticipation
Seems you now want to be throwing part to the problem which is the Kazeem approach of resolving problem .
Assume it is not the radiator and you have already wasted around 20k on one ,how will you feel.
Get the issue diagnosed accurately before you start buying parts.

1 2 3 4 5 6 7 8 ... 16 17 18 19 20 21 22 23 24 (of 59 pages)