₦airaland Forum

Welcome, Guest: Register • Login • With Google • Trending • Recent • New

Stats: 3,346,277 members, 8,522,123 topics. Date: Friday, 20 November 2026 at 03:45 PM

Toggle theme

Honmusa's Posts

Nairaland Forum › Honmusa's Profile › Honmusa's Posts

1 2 3 4 5 6 7 8 ... 20 21 22 23 24 25 26 27 28 (of 59 pages)

Car Talk › Re: How To Know A Good Engine. by honmusa(m): 11:05am On Oct 21, 2016
whoislikeGod:
112
13281-0A010
3 98 F
My engine metal number is the figures above, the first mechanic that checked my engine on the road as the point where it get knocked after looking at the metal said is 010(crankshaft reduced) while the second mechanic I called to assess the engine at my house where I pack the car after showing him the metal said is STANDARD crankshaft. please I want to know the grade of my crankshaft based on the numbers I display above, Am confused here. the engine knock i had was as a result of water leakage which caused the overheating till the engine knock down on my way unknown to me, while driving i was busy looking on my time neglecting my temperature . I just bought the car from a friend. I've concluded on buying another engine. pencil light xle 1998 model. thanks
Bros leave story ,pay a mechanic to look for engine for you before before you get more confused cos I no even understand you again if it is crankshaft you want buy or engine .
Car Talk › Re: Car Talk Chat Room by honmusa(m): 8:15am On Oct 20, 2016
HazzanTazzan:
So I finally got my Nissan altima 2.5, scanned today after using it for 3 months...
I'm sure oga Gazzuzz and diportivo remembers me well from my Nissan thread...
I was complaining of hard start back then..
Sometimes, the car starts normally for a period of time (a week maybe) without any form of hard start... It starts once...
Sometimes it just begins the hard start again and starts only after 3 or more tries...
However, its been working fine for over a week now but I just decided to get it scanned.
The scan codes are attached below..

Now my issue is which one of these codes could be causing the ocassional hard start?

I Dont want these mechanics to start putting hand where it isn't necessary...

What advise will you give me on repair?
Thanks
The codes responsible for hard start are the p0128 and p0335 but if you have it occasional you might be having an electrical issue ,partial contact .
Don't change any sensor yet until you are really sure ,u need to run a live data on the sensors to know what is happening.
If you are in Lagos ,u can contact autologic @08061166316 to run a comprehensive diagnostics .
Car Talk › Re: Maintenance Tips For Honda Cars by honmusa(m): 7:59am On Oct 20, 2016
IYIMAN:
. One kazeem said the thermostat is responsible, the second one said I should change to double cell.. They are no way going to touch my car. Gurus, help out.
The issue is purely electrical issue,you have one of your cooling system device permanent on battery.
call autologic @08061166316 for resolution.
Car Talk › Re: Maintenance Tips For Honda Cars by honmusa(m): 7:56am On Oct 20, 2016
IYIMAN:
. One kazeem said the thermostat is responsible, the second one said I should change to double cell.. They are no way going to touch my car. Gurus, help out.
The issue is purely electrical issue,you have one of your cooling system device permanent on battery.
call autologic @08061166316 for resolution
Car Talk › Re: Maintenance Tips For Honda Cars by honmusa(m): 7:24am On Oct 20, 2016
samilo88:
Gurus in d house please I need ur help. The abs light on my accord is on. My mechanic just changed my brake pads, D brakes works perfectly but am not comfortable with the light on. My mechanic said D abs is OK that I just need to clear the error with a diagnostic tool. I don't want to spend money just clearing warning light if d abs is faulty .. Please I need advise from car specialists here.
Your mechanic might has cause issue with the abs while replacing brake pad otherwise the abs light will not be on permanently .
contact autologic @0806116316 ,I will give u a free abs scanning if you are in Lagos
Car Talk › Re: Honda Accord 2009( Evil Spirit) Vs Toyota Camry 2009 (spider) by honmusa(m):
kingreign:
Poor quality leather which begins to form bubbles and cracks and make the whole interior unsightly.

As for the VTEC, Toyota's reply is VVT-i
Toyota VVt is still learner compared to VTEC .There are 3 basic way to achieve valve performance:
Lift (how far the valve opens )duration(how long it opens advance(when it opens) ,VTEC can do that for your at once ,this like having a turbo power with minimal fuel consumption ,Toyota vvt is a light years behind ,vvt can only achieve advance in different rpm.
Car Talk › Re: Honda Accord 2009( Evil Spirit) Vs Toyota Camry 2009 (spider) by honmusa(m): 6:52pm On Oct 19, 2016
Personally I prefer accord ,better performance and powerful with the honda VTEC technology and better looking interior.
The only drawback is that accord has more vibration .
Car Talk › Re: How To Know A Good Engine. by honmusa(m):
whoislikeGod:
OK, autologic I intend buying it at Onitsha. hopefully month end. I don't want to make any mistake. 130k is not easy for me to bring out now. again which is best, aluminium cast or iron cast engine. advice please.
It is better you buy the exact replica of the engine you are changing ,don't let any engine seller or Kazeem confuse you into buying what is not design for your car .When the manufacturer if your car are designing your car ,the engine material parameters have been calculated into the design .If your engine is aluminum or cast iron ,buy what you meet there.
Unless you want to design and manufacture a fresh car for the engine you are buying.
Car Talk › Re: How To Know A Good Engine. by honmusa(m): 11:40am On Oct 19, 2016
whoislikeGod:
Please experts in the house I need your advice.
Of recent my Camry v6 xle 1998 model engine got knocked. I want to buy a direct Belgium engine to replace the old one, since they don't allow one to open the engine as to have a look of the inside before buying; how do I know a good sound one with standard crankshaft and metals intact. Thanks in anticipation.
check for compression ,check for rod knock Noice ,check the condition of the oil,check for sign of coolant mixing with oil ,and finally for signs of engine dismantling work done on the engine before .
Ordinarily u can't do this by yourself unless you have the experience and the skill,U need a trained professional with a special equipment to do these for you .
contact autologic @08061166316
Car Talk › Re: Please Advice Needed,my Camry V6 2000 Jerks by honmusa(m):
MYDEBBY:
Dear Nairalanders,pls can you help to advice me on what to do concerning this issue.Whenever I start my car Camry 2000 V6,I discovered recently that the engine jerks and the sound is no longer normal and the exhaust is blowing lightly. It sounds like it wants to off,even after throttling,it will still.be sounding like it wants to quench.Pls can someone in the house help me on what to do cos I recently thought it was fuel pump and had to change the fuel pump.But not up to 3 months of changing the fuel pump,it started.
This is a performance related and require the touch of a professional to run a diagnotics test on the fish out the culprit accurately.
If you are in Lagos contact autologic @08061166316 .they are specialist in vehicle performance issue and very well equipped with the latest diagnostics equipment to resolve the issue for u .
Car Talk › Re: Idling Of My Car Goes Down by honmusa(m):
gustavowoltmann:
Hello everyone. I am seeking for help and answers regarding my idling problem with my toyota corolla 1994 gli. Everytime I start the engine and turn on the a/c the idling suddenly drops and also the engine also stops. What can I do about it?
The AC is taking more engine power resource allocated to it by the ECU and the ecu is left with a little resource to maintain proper idling of the car .
there are only two reason why this should happen ,
1.Dirty idle air control
2.Using wrong AC compressor specification
Car Talk › Re: Deciphering Mazda Icon On Dash Board by honmusa(m): 8:05am On Oct 18, 2016
speed001:
Thanks @ nurey. Its not an accidented car at all. For three years car has been in top shape with nonrepaira done at all apart from servicing. The check light came up when my brother was involved in a collision and d car refused to start. They had to bring an electrician who said something about a fuse been blown and stuff and also affected the fuel pump. All was changed and car cranked as first start. I was not home when all this happened. D coolant issue started when the engine was washed. The car overheated and we discovers that coolant was not flowing to the upper hose . pls advise on what to do. Thanks all. NB CAR WAS IN A FOUR HOURS HOLD UP YESTERDAY AND DID NOT OVERHEAT.
What to do about what??
Car Talk › Re: White Smoke When I Start The Engine -03 Camry (EXPERTS IN D HOUSE TO RESPOND PLS by honmusa(m): 8:25pm On Oct 17, 2016
LeBlack:
Hi. Was the problem resolved after changing the valve seal?
Why don't you create your own new thread cos the last time I check on Nairaland ,new topic creation is free.
Car Talk › Re: A Good Rewire Contact Needed by honmusa(m):
AmiLaHoit:
Dear NL family, my friend needs a competent/reliable rewire within surulere.
Kindly assist with the person's mobile number and name.
Thanks.
If I were you ,I won't look for rewire ,i will look for a professional auto technician or take my car to a auto-workshop.
Cos rewire will cause more damage to your car in a bid to resolve issue due to lack of theoretical background in basic electrical concepts ,which is why a rewire will use a thin wire laced with dirty pure water nylon to connect a fan cos he doesn't understand the scientific implication .
That is why they are labelled Kazeem cos you are actually paying them to destroy your car .
Car Talk › Re: Wanted: Modern Repairs Centres by honmusa(m):
OmerianConsult:
I salute all the erudite automotive engineers in the house.

Does anyone know of good, automated vehicle repair centres in Lagos that does a great job with sensors, scanners and other technology? What of the ones that offer training?

I appreciate your great responses with their names, location and contacts.
Also, practitioners can WhatsApp me on 08132232989.
call autologic @08061166316
Professional Auto Diagnostics and repair centre that pride itself in using scientific and state of the art equipment in rendering auto diagnostics and repair service.
Objective is maintaining excellent customer service and achieving 100% accuracy in all our diagnotics service at the shortest time possible
Also classroom and hands on training is available in Modules below :
1.Basic Foundation in Autodiagnotics
2.Advance Diagnostics :Performance and computer control
3.Auto Electrical .
They are situated in Charley boy bus stop ,Gbagada Iyanaoworo expressway .

Car Talk › Re: Toks Heated O2 Sensor by honmusa(m): 10:06am On Oct 17, 2016
fortunejum:
Oka, my 1999 Toyota Camry 2.2 is equally consuming 10 lits on 70km. Is it alright?
Google your car mpg online and compare with what you have ,
Car Talk › Re: Engine refused to start.. . Urgent Help Needed by honmusa(m): 11:56am On Oct 15, 2016
princemillla:
Thanks for your response..

The car in question is 2004 Quest.
The brain box was stolen, so I bought another one and it was showing car with key in it so we need to program it. Tho the code has been read. The car has refuse to start. After scanning, we discover the flywheel sensor beneath engine is damaged.after replacement
The Still engine didn't start, there was no single shock and the nozzle refused to open also.

Could this be a bad brain box or the flywheel sensor.
Pls help a brother,
Sienna erico2k2 mayor GAZZUZZ
please stop calling crankshaft position sensor flywheel sensor .it too razz !!!
Car Talk › Re: Change Of Engine Oil by honmusa(m): 11:52am On Oct 15, 2016
Greyowl:
I equally have same issue but I don't have your contact
08061166316
Car Talk › Re: Car Advice: What Does The Check Engine Light Mean? by honmusa(m): 5:05pm On Oct 14, 2016
Monlo:
i had my car scanned,and the computer guy said d problem is the indomie inside the exhaust and also sensors 1 &4 of my tyres.That i needed to change the indomie and tyre sensors.I decided to visit one of the road side Kazeems' who read the tyre pressure and shouted it was overinflated,ever since he deflated it to the pressure prescribed by tyre manufacturer,that signal of tyre has disappeared from the dashboard,leaving me with checkengine only.Hmmmmmm,so the computer guy failed after checking it.Hmm ,do i need to change d indomie since he failed initially with d evaluation.Pls suggestion needed.Tnks
Scan DTC result are not to be taken literary as the definite diagnosis result as some further test still need to be done to isolate the issue.
That the scan DTC shows a faulty catalyst doesn't means you take the result hook and sinker,a lot of variables is still involved ,eg faulty downstream o2 sensor ,exhaust leak etc.
So further test need to be done to isolate the issue or else you will buy a catalyst worth 70k and the catalyst code will still persist.
If you in Lagos ,and you need a professional diagnostics service ,call autologic @08061166316
Car Talk › Re: Change Of Engine Oil by honmusa(m): 11:50am On Oct 14, 2016
geovidal:
thank you for the response. It's unfortunate that my location is Ilorin. What do you suggest.
call my no ,I can put your through some test procedure.
Car Talk › Re: Change Of Engine Oil by honmusa(m): 9:01am On Oct 14, 2016
geovidal:
Good morning to you all, I was reading a thread on engine oil meant for Toyota corolla, and I found out that the correct engine oil specification is SAE 5W-30. I ve been using total quartz 5000 for servicing for almost a year now which is 20W50. My question is if i revert to the normal oil specification [5W-30],would there be any potential damage or effect on the car engine?.
Note; the car is Toyota corolla S, 04. Thank you, response from the professionals; gazzuz, honmusa and other experienced auto gurus. Anticipating your response.
Depending on the extent of tear and wear damage the 20w50 will have done to your engine piston ring and main bearing. Do a compression test to verify if your cylinder compression is still intact before go ahead to change cos if your piston rings are already worn and you go ahead with the 5w30 which is lighter, your engine will be shorting oil .
Contact my signature if you are in Lagos if you need to conduct this test.
Car Talk › Re: Re: The Mysterious GM Chevrolet Stalling Issues Solved by honmusa(m): 2:29pm On Oct 13, 2016
TRYGO:
@mallam musa. If the job I did, was a code generated one, I would have get the scanned codes retrieved, and shown you the procedures I employed in cases like that. I just do really hope you watch that video.
No enough data to watch video ,somebody need to be managing the available data ones gotten this days ,this is a change era
@Gazzuzz ,abeg compress the video for me in 20kb wen u finish watching it
Car Talk › Re: Re: The Mysterious GM Chevrolet Stalling Issues Solved by honmusa(m): 10:41am On Oct 13, 2016
GAZZUZZ:
grin grin grin grin


[size=1pt]watch out he is coming for you [/size]
The guy is a gentleman !!
Car Talk › Re: Toks Heated O2 Sensor by honmusa(m): 10:33am On Oct 13, 2016
connkg:
Good day All,
A 2nd-hand heated oxygen sensor is being considered or purchase. The current (or voltage?) has been checked (9 or 0.9, can't remember). It throws up low volts (P0131 error code when scanned in-use).
How serious is this fault? Will there be any actual savings on fuel consumption? Any sense spending 10-12k on toks?

Cc: Gazzuzz (please...so others can learn smiley
No info information on the car model which will be used to explain the situation better .
The o2 sensor is one of the most important fuel management system in your car which is why it is expensive and failure to rectify the issue you are encountered with it will lead to paying for it more in form of frequent patronage of filling station
But do yourselves a favour ,don't buy 02 sensor yet until it has been confirmed 100% that it is faulty cos you have a code pointing to it doesn't meant it is faulty.
Maybe u need to visit a specialist to diagnosis it fully well for u .
If you need one and you are in Lagos ,call autologic @08061166316
Car Talk › Re: Re: The Mysterious GM Chevrolet Stalling Issues Solved by honmusa(m): 8:22am On Oct 13, 2016
TRYGO:
Hi, fellow car talk guys.
If you all could remember, some weeks ago, I posted a particular problem that was giving a client tremendous headaches, and how I went about solving that particular fault.
I would be bringing you guys, other issues that transpired, after I had carried our some drive cycles on the car, in rider for the ECU, to relearn what has being done.
Expect the updates later this week.

Regards,
TRYGO
PS: Pictures of the car, for your perusal.
Its a 3.4L engine V6...
Posting the picture of the car doesn't convey the reason the thread is created as if you are advertising car sale.
The picture that we want to see repair procedure ,scan DTC,live data of the spotted problem and a scan data showing the issue has been resolved.
We need to see the evidence not by mere saying it.
Car Talk › Re: Re: The Mysterious GM Chevrolet Stalling Issues Solved by honmusa(m): 8:22am On Oct 13, 2016
TRYGO:
Hi, fellow car talk guys.
If you all could remember, some weeks ago, I posted a particular problem that was giving a client tremendous headaches, and how I went about solving that particular fault.
I would be bringing you guys, other issues that transpired, after I had carried our some drive cycles on the car, in rider for the ECU, to relearn what has being done.
Expect the updates later this week.

Regards,
TRYGO
PS: Pictures of the car, for your perusal.
Its a 3.4L engine V6...
Car Talk › Re: Error Codes P0420 And P2423 by honmusa(m):
thegame:
Evening all,

Please my 05 camry was scaNned today these 2 codes came up.

Kindly assist with suggestions on how to resolve these.

Was reading up on the solution and calatytic converter, oxygen sensor and so on came up.

Has anyone dealt with these two before??

Suggestions and advice will be appreciated.
Ur car must be a 4 cylinder to have p2423 code (1 precat and 2 post cat O2 sensor on single bank ).
This code point to the fact that the 2 post cats o2 sensors are seeing same waveform pattern which is an indication of fault in the system .This fault can be due to a defective catalyst ,exhaust leak or bad 02 sensors.
90% of the time is always due to a faulty cat but in this buhari change era,buying cat that is very expensive need 100% confirmation .Cos it will not be a good idea to buy part worth 70k and the issue still persist.
So get a professional to help u to check with the aid of dedicated catalyst diagnostics tool for performance .A scanner will not suffice in this situation nor physical examination of the cat.
If you need a true professional and u are in Lagos .call autologic @ 08061166316.e

Car Talk › Re: Honda Expert Pls Help by honmusa(m): 8:28pm On Oct 12, 2016
okenne:
just bought a fairly used honda 2003 hybrid,my mechanic removed d bat3 to fix a new engine seat after which d security settings started misbehaving. The keyless not working. Though d stereo was removed to fix.pls help,how do I solve dis prblm
U need to take the car to diagnostic expert to help you use high end smart scanner to adapt the car modules to default setting as the securities setting as been erased from memory as a result of removing battery.
If you are in Lagos and u need the service of a professional with high end scanner ,call autologic @08061166316.
Car Talk › Re: Honda Civic 20014 Engine Noise During High Atmospheric Temperature by honmusa(m): 6:46am On Oct 12, 2016
Sosaye:
I use Honda Civic 2004 manual. Since the time I bought the car, it has been realiable. Its actually stated in the review of the car the engine noise especially at the high speed. I notice that when atmospheric temperature is high I.e during 'sunning' afternoon, I usually observe that the engine noise is high but engine is moderate during a colder atmosphere I.e in the morning, when its raining or just rained.
Pls any suggestions

Note that the engine is ok. It starts once and doesnt give any problems. I have not observed any significant difference in fuel usage during both period.
What kind of oil are u using to service your car also u need to know the location of engine where the noice is coming from (bottom end or top end of the engine ).
Car Talk › Re: Help Urgent Issue by honmusa(m): 4:33pm On Oct 11, 2016
yommy2yommy:
my mechcanic blocked the hose from the radiator to the gear pls help on the pros and cons the car is volvo 850
I am sure is from your village den send that mechanic to you to put hole in your pocket!!

1 2 3 4 5 6 7 8 ... 20 21 22 23 24 25 26 27 28 (of 59 pages)