₦airaland Forum

saleemema:
Can't say what?
Next year what? Isn't next year's admission processes different from this year?
You're arguing what you do not understand in the first place. Now, I'm telling you authoritatively that no second list is coming out. You can choose to believe otherwise, but it doesn't change the fact.

You obviously didn't get the sarcasm/joke

aleniboro:
Level of Performance Rating: This is the rating of grades obtained in terms of credit points per load unit. The rating used is as follows for 5 CGPA course unit system (OAU):
Level of Performance Rating (credit points per unit)
•A (70-100%) – 5
•B (60-69%) – 4
•C (50-59%) – 3
•D (45-49%) – 2
•E (40-44%) – 1
•F (0-39%) – 0

◦First Class: 4.50 and above
◦Second Class Upper: 3.50-4.49
◦Second Class Lower: 2.50-3.49
◦Third Class: 1.50-2.49

For 7 CGPA course unit system (UI):
•A (70-100%) – 7
•B (65-69%) – 6
•C (60-64%) – 5
•D (50-54%) – 4
•D (55-59%) – 3
•E (40-44%) – 2
•E (45-49%) – 1
•F (0-39%) – 0

◦First Class: 6.0 and above
◦Second Class Upper: 4.6-5.99
◦Second Class Lower: 2.6-4.59
◦Third Class: 1.6-2.59
◦Pass: <1.6

There's an error in your grading

Benjax:
Alright. But IJMB and JUPEB are A level programmes; which other ones do you mean?

Cambridge

Please don't be deceived or get your hopes raised. I dont think there will be any other list . So it'sbetter you move on and make other plans

Donpre:
yea I did... thanks a lot

you're welcome

Donpre:
Guys, I was just flipping through my textbook's pages and the formula for maximum height of a projectile caught my attention

The formula is H = U²sin²O/2g

sin²O gives a math error... in fact sin² doesn't make sense, please someone should put me through, how do I find the square of sin

Ok, here is it
Sin²@ = (Sin@)²
For example, if @=30°
Sin²30 = (Sin30)² = (0.5)² = 0.25
I hope you got that

kemieve:
A battery of e.m. f 12v and internal resistance 1. 5 ohms is connected to an external resistor of resistance 3ohms. calculate the current flowing in the circuit. calc the pd across the 3 ohms resistor and the internal resistance. calc the terminal voltage of the battery.

Emf = V + Ir; where V is the terminal voltage, r = internal resistance, R = external resistance
E = IR + Ir.
You can finish it if from here

kemieve:
A body of mass of 20kg appears to have a mass of 13kg in oil and 12kg in water. what is the relative density of the oil?

Relative density of liquid x = Upthrust in liquid x/Upthrust in water
Rd = (W_air - W_liquid)/(W_air - W_water)
(20 - 13)/(20 - 12) = 7/8

Any new mathematics students here, UTME or DE?

LordDecency:
Did yhu fill the medical Form?
Are you active on WhatsApp if so drop your details...

You might eventually not need to fill The medical form. It's not needed for your clearance now. Ordinarily, it is meant for your medical screening but with respect to last year's experience, it was discarded as students were asked to fill a medical form online, print and submit the overview of what was filled. Albeit to be on a safe side, you can just decide to fulfill all righteousness by downloading and filling this manual one as you never can tell what to expect from UI.

iXavier:

How come I don't know you?

Or do I?

You do. The Catholic guy in the room

iXavier:
Lol
Yes

Who are you?

Flames' roommate in Mellanby. The story about the phone you told here matches the one you told us in the room the other day...

iXavier:
Yes, they should
And other stores in mokola sell too

Are you lzu in the college of medicine

donnubzy:
there was clearance that day oooo n that was my date....... but I did mine the next day

oh! Ok then

Debra01:
Pls, was there any clearance today?

Oh! Sorry, I didn't see this earlier, I've been busy. I don't think there was clearance that day.

hardeiluxie:
The portal haven't been updated yet....Nd i'm amongst those that are asked to come 2morrow...Any advicepls reply ASAP sir.

My advice is for you to make yourself available at the clearance venue with the documents and your acceptance fee in cash

alanpasu:
Please,d clearance is starting tomorrow and d site admissions.ui.edu.ng has nt been updated yet for d payment of acceptance fee....i guess this is applicable to everybody?

Yes, I think it applies to everybody so no need to fret

hardeiluxie:
Thnks for helping out sir.

you're welcome

hardeiluxie:
Jamb form B001 and B003....Have u any idea of woh it simply means sir?

yeah, it's one of the forms that you'll fill and submit during clearance. It'll be made available for downloading and printing on your portal

PrinceCEE:
Like a play, Am about to say congrats to the soon to be UITES . I remembered how I was like you guys till the 1st of October when I saw my name in the merit list under the section of Mechanical Engineering.

I really felicitate with you guys for ur admission into the best university in Nigeria and one of the prides of African. The school that will breed you into being worthy in character and learning.

But the truth of the matter is that it doesn't end in getting admission cos ur journey in tedious and interminable reading got half signed which after ur clearance, it'll be fully signed.

Our Minister of Education brought the standard of education to its minimum level cos of the ridiculous regulation he proposed. It'll be so disheartening and painful when one gets expelled after his/her first year in UI. I need to be blunt to you guys, it's very easy here but the truth of the matter is that 'easy' as a word is relative cos it depends solely on the individual.

If a large percentage of those that passed through UI's deadly screening test fumbled in her exams, what more about those that didn't even write any exam It's obvious that some got their A's and 290's in ssce and jamb respectively through unscrupulous ways but the new game is that no matter how you made ur admission into the FIRST AND THE BEST , try to retain it.

I enjoin you guys to brace up for the challenges ahead cos I know that you guys are made of Super-brains

For those of you admitted into the best faculty in UI which is the FACULTY OF TECHNOLOGY,I personally say welcome but I'll fully welcome you guys officially after clearance. And please, for the new female techites[our baes though u guys are normally few in number], pray they allocate Awo or Idia hall to you guys so that u won't have to carry ur drawing boards for a long distance.... u guys will actually thank me later...

For the new Mechites, I felicitate you guys for your admission into the power engine of the faculty of technology.

See you guys next year and also pray that ASUU reconsiders her resolution.

Cc;
mathefaro
pr0ton
cassyrooy
Olatunji
getovame
thankyoujesus
misspresident
bhuumite

The boss has spoken

PrinceCEE:
So shallow-minded. Am a uite, graduating with first class isn't as easy as u might have conjectured. Those guys are really stuffed and also extraordinary to achieve that feat. Tsunami and erosion is very real here, so whenever you see a UI first class graduate, adore him/her.

If u don't know what the emboldened is, then u're free to quote me...

My brother, I just couldn't hold back my laughter when I was going through the ignorant comments on this thread.
This(high number of first class students) is what you get when a school admits the hottest brains all over the country through a fierce and thorough post utme screening disregarding both Olevel and UTME results which could be "the work of miracle centres". Mind you, Mark my words, this result will only get better for the next 3 years or thereabouts. Trust me, I'm in the system and I know the calibre of students the school has in here. The story could however change with the students that'll come in through the new screening process.

So once again, I congratulate all the fresh UI graduates especially the first class ones. I pray the labour market favors y'all cos that's the only thing that counts at the end of the day.

#peace

oldfoolnigger:
ameno and goodluck on ur forthcoming exams

thanks bro

hardeiluxie:
No news abt d admission list yet sir?......cos#i don taya oo..My anxiousness is already long gone bro.

Like I've always told you people, one of the first things you'll learn as a UIte is patience. I'll advice you get mind off it totally. The list Will drop anytime they're ready but I'm sure you won't have to wait for too long again.

oldfoolnigger:
Wish i could have a taste of it one day.when would the exams start?

Started with GES on Monday.. Don't worry your time Will definitely not pass you by

oldfoolnigger:
Hahaha.oga how skul na?

School is bubbling as usual.

oldfoolnigger:
My father's friend knows somebody who has a brother that relates to great grand father to ui vc.contact me for ur admission.

please kindly give me his whatsapp number or BBM pin

Debra01:
Don't fall for his scam o....He posted same on another school thread too

Thanks jare my sister. Actually, I was bored and wanted to play around with him. As it stands, he's not even a serious business man...

engayeghel:
Unibadan 2016/2017 session Post-utme admission Assistance .
For more inquires, complaints, your name is not among the shortlisted names on the admitted list due to your low score to your course ,
any aspirants looking for admission in Unibadan should contact Mr Ayeghel, admn for assistance on your Admission now.

please sir, how can you help me? I got 41.9 and I intend to gain this admission this year to avoid suicide. Please help me

RobinHez:
just follow this thread, and i'll in my possible best keep you updated as i receive info.

ok

Please is there any hint in which devices will be up for discount this year. A friend of mine is eying both the Tecno Canon 9 and Infinix hot 4. Any details/update about these 2 devices as regards the black Friday will be highly appreciated

Please is there any hint in which devices will be up for discount this year. A friend of mine is eying both the Tecno Canon 9 and Infinix hot 4. Any details/update about these 2 devices as regards the black Friday will be highly appreciated

RobinHez:
Black Friday is here again...From November 14th to 25th 2016

Good evening. Please is there any hint in which devices will be up for discount this year. A friend of mine is eying both the Tecno Canon 9 and Infinix hot 4. Any details/update about these 2 devices as regards the black Friday will be highly appreciated