₦airaland Forum

Good day house,
Please i am a little confused about the TLS website.
I choose VI Centre
for my Biometerics was charged 55GBP each
for return courier was charged 14GBP each
for Flexi was charged 84GBP each (coz they insist applying as family must pay for flexi)
Total about 170 GBP per person (N400,000)
I am applying for 5 family members do i need to pay all these fees just for a visa?
Isn't this extortion?

This excludes 4,400GPB already paid for visa fees.
I am already thinking of cancelling the application what is the refund procedure

justwise:
Have you tried creating another account with the real email address?

No waiting for their response.

However please is there a way I can request for a refund?

So I can fill a new form, I don't mind waiting 28 days for the refund

justwise:
Is the application completed and paid for?

Yes it's been paid for.
Wanted to choose date for appointment on TLS only to notice the mistake

Good evening @justwise
Please while filling out my family VISA forms (5 of us)
My wife made a mistake on the email address and therefore unable to login with the email.
We have sent TLS a mail notifying them of the mistake.

Please has someone else had a similar issue and how was it resolved.

We all applied for 5 year Visiting Visa and i can forfeit that amount..

Thank you in advance for your response

Please.

Onnoghen resign pls

earthrealm:
thanks for the concise analysis, am a morning star fan, but i also lost one due to high pv array..i guess, the loud fan noise, is it on everytime the cc is on, or its controlled by a temp sensor, and comes on intermittently, how loud is the noise?, could you sleep in a rm with the cc installed there?, is the fan as loud as mustpower inverter fan?

Well with tym u get use to the noise.
I have 2 Outback CC and a 5kva Must power inverter
Imagine the noise when they all come on at almost same time.

The fans usually come on when the there's a sharp increase in pv output or when the pv output is high. In fact I use the noise of the fan to know when the sun is at full blast

earthrealm:
@nonoski, what are the cons of the outback flexman, what should a potential buyer beware of?, have you used another tier 1 cc, like morning star, how does the outback compare against them?

Other than the loud fan noise I doubt there's any cons for the Outback. It's been that way for 13months with no human interference needed.

I also have a Fangpusun flexmax 60A mounted in same vicinity with 2kw solar array but the output is slightly less than the Outback, if u add the cumulative output then I will go with Outback.

I also have a Victron 250/100 mounted in my village house, that one is a class on its own.
I monitor its output every day remotely

Where did INEC keep the results since March 9th?
If it isn't in the CBN custody them whatever result they release is scam

adrusa:
Hello my people,
Does anyone who has used outback FM 60 or 80 has any experience with Fangpusun clones? I have a setup with an Outback FM80 and a Midnite Classic 150. Sometimes, either of the CC go into float while one is still in bulk. So, I'm tempted to buy another outback hoping that two outbacks will work together better. But, I was wondering if I should buy the cheaper Fangpusun since they appear to be 1:1 clone of outback . Any thoughts is appreciated.

Don't waste ur money continue to use ur system the way it is.

I currently have 2 Outback Flexmax 80, they are both connected to 600AH 48v battery battery bank.

1 of the Outback (CC1) is connected to a 4.5kw solar array
While the 2nd (CC2) is connected to a 2.25kw solar array.

CC1 usually goes into absorb by 1pm and then float while CC2 continues on bulk all day long

I reduced the settings on CC2 slightly so now it goes into absorb some hrs after CC1 goes into absorb.

I have decided to leave it at that.

Ps: u can't compare Outback performance to Fangpusun even duh they look alike

Attached is a picture of log from 5 days ago

Pic 2 is CC1
Pic 3 is CC2

Lol

Lol

Good man.
With a good heart.

The only problem is that most state governments will not be able to pay this minimum wage.

They should have been a range from N22k to N30k for State to choose from

Na waa

Deputy Governorship candidate that can't spell the name of his own party African Action Alliance instead of African Action Congress.
Ogoni people and hunger

Cheap and fake news...

No wonder they don't like Buhari

Umahi

Blacks always the victim of false rape allegation

Good

Dino Dino

Isn't Obasanjo a criminal

Drama king

NiyiOmoIyunade:
Felicity has hybrid 5Kvas similar to Zinox and Gennex.

A 5Kva should be sufficient to power 1.5hp pump as the only load.

I will inquire about a 7.5Kva hybrid as I never had a need for it before now - worst case scenario is to use two 5Kvas in parallel (Felicity has a very sweet pricepoint on their inverters) but I believe a single 5Kva unit should be sufficient.

Pls where can I get the 5kva 48v Felicity Hybrid Inverter and pls do u know the cost?

NiyiOmoIyunade:
Felicity has hybrid 5Kvas similar to Zinox and Gennex.

A 5Kva should be sufficient to power 1.5hp pump as the only load.

I will inquire about a 7.5Kva hybrid as I never had a need for it before now - worst case scenario is to use two 5Kvas in parallel (Felicity has a very sweet pricepoint on their inverters) but I believe a single 5Kva unit should be sufficient.

Thank you very much
Pls I checked before for Felicity brand of 5kva but it was mostly 24v

Please house I need a reliable Hybrid inverter 7.5kva 48v with at least 60amps Mppt.
It will mostly power a 1.5hp submersible pump only but occasionally (less than 20 days a year) power 2nr 1hp AC.

Please I need help on this.

NiyiOmoIyunade had once recommended Felicity but I noticed they don't have hybrid versions or am I wrong.

ojeysky:
Am using a 10kva Dunamis bought about 3 months ago....works well so far. It has a wide band as well 80v to 260v though once the current is below 150v iron, kettle etc are a no go area and the stab produces so much noise that make me scared of the stab spoiling.

Wow i tot it was only the bluegate brand i met in my friends house that makes such noise.

Maybe i should just go for isolated 5kva stabs for important equipment instead of buying these noisy 20kva central stab

Pls which brand of servo or stabilizers are most reliable.
Some say Prag other say A & E Dunamis while others recommend Mercury.
Please based on user experience which brand is most reliable (15kva -20kva single phase) with wide input range 100v - 240v.

Thank you

fake news

Ur heart is filled with hate.
Take a chill pill

I think it's 500 million people

Lol