₦airaland Forum

fulfilled2016:
Used age.....2years
Mileage....128000
Check engine light....I always ensure to service d car as at when due, I service the car just 2 weeks ago.

Do you mean you have check engine light on it? Have you scanned to know the error codes?

What engine oil made/type do you service the car with?

duwdu:
My PIP5048GK was formally delivered yesterday.

Here are some "still tear-rubber" unboxing photos (a total of nine, spread over three posts including this,) for eye candy...

........
P34c3
.....
...

I am looking at the manual it's written 320vdc as the normal operating voltage but the attached picture reads 240vdc.

Irrespective am trying to understand what this means, does it mean that it is until I have sufficient number of panels in series totalling 240v that the stuff can work?

So if a solar panel Max PV is 32v I will need a least 8 panels before I can use this inverter?

fulfilled2016:
Still Blazing, selling to buy a Lexus.....

Provide more details, the mileage, any check engine light? Are the setup still in factory spec like fan and thermostat. What's the service history?
How many years have you been using it?

Is this still available? Interested.... please check your WhatsApp

earthrealm:
yeah, zeestone dey try most times - above naija average

I agree and he communicates well unlike some other seller that I know on this thread

dicksonadams:
Boss... Just bought this car Honda Civic 2008 LX on copart... My friend shout and told me I don buy wahala, though he self can say what they are.

What and what should I be prepare for

By the way how much did you buy this (including shipping and clearing cost) and how easy and reliable is buying, shipping and clearing a car without being into that business. Does one save any significant amount in the process?

Onigastephen:
Oga Guru,

How u dey? If I pack my 2018 lexus LX 570 for my garage without use for 3 years and return to it.
Wetin go happen to the engine and the configuration? I want travel. Abegi!!!

I think you need to first be sure to remove the battery connection unless you have someone to keep it warm. When you return don't hesitate to change all the fluids (oil, coolant etc) before significant driving

GAZZUZZ:
I am saying with your 200k budget, you will not find a good car.

Opotorokoto.... Gazzuz must you be on point on everything.... One cannot even play with you...

Freelancerx:
- Download firmware V21.200.11.00.00
- Use the Universal Master code you downloaded there to generate flash code by inputting your Mifi IMEI and tapping on the calculate tab.
- Disconnect any internet and close your browser
- Unzip the firmware file and run the update file
- It will start to update and request for password, so key in the flash code you generated above as the password
- And wait for update to complete
- Once the update is complete, you can now head back to the page you came from and continue with firmware update and the rest of the procedures outlined there to unlock your MiFi.

This did not work for MF970

duwdu:
In the meantime, dear gurus, I think my immediate task is to prepare to properly and optimally handle the 500V (450V max advised to be used, ) capability of the PIP5048GK I will receive soon. I will initially load in 10 panels totalling 3.2KW in 1s with a VoC of ~370V. The rated sweet range for MPPT is 120-450V.

The operation instructions stipulate that arrays to be connected should be ungrounded. The advice is to pass arrays through a combiner box equipped with an arrestor.

Can I get away with just using an arrestor, since I'm starting with a single string? If yes, which particular ones are advised for use in the coastal area?

If I must use a combiner box, kindly advice me on suitable ones. Thanks.

........
P34c3
.....
...

Documentations that I have read[1] suggests that combiner boxes are for high PVs with over 500kw. How is it going so far with your new tool?

Regards
1. https://www.quora.com/What-is-the-purpose-of-a-combiner-box-in-solar

franksam2009:
Boss my toyota corrola 03/04 single cell radiator fan just develop fault and car overheats yesterday,. I intend getting another fan today,. But I wish to get the double cell radiator instead,,, my question is will I get a double cell fan that will fit into a single cell radiator? Have u seen such cases be4?

I have been in this situation before; considered a double cell radiator fan, considered connecting fan direct and finally considered changing engine. It so happened that the issue was the radiator itself (thanks to the Oracle Gazuzz) so you may want to check you radiator for leakage else just change the radiator to a new one!

GAZZUZZ:
no worry search market well you will find 500k vehicles

Bros na joke I dey o..... But I guess you know who this is sha :-)

GAZZUZZ:
900k Its my daily driver.

500k nko

duwdu:
Hello, my people;

My own eagle has landed in Naija and hopefully will be delivered to me soon. (Tracking manifest attched.)

It is an MPP Solar's PIP5048GK, as can be gleaned here: https://www.mppsolar.com/v3/pip-gk-series/

I'm super excited already; please wish me the best with it, house, as I keep us posted.

........
P34c3
.....
...

Cool, am planning to buy the 3kva version of the same series (hopefully by march), how do you go about the shipping or did you just use the expensive DHL shipping? Looking forward to read your experience on performance!

Hello,

Please anyone with recommendation on good low watt standing/ceiling fan and price?

mayor2013:
BMW contacts Bosch during production of most of their vehicles. Mecerdes Benz contacts Bosch as well during production of most of their vehicles that's why you see most parts come in Bosch. Toyota contacts denso, Aisin, Bose and many Innovative companies for production of some components.
This Is what you call an informal approach to learning. So you better sit down relax, hush your mouth and be attentive so as not to miss better ideological information ahead of you in the automobile repair industry

Actually you missed the point, I was only pointing to the previous fuckboy poster that it doesn't make sense that Gazzuz will clean off the carbon as there is noting he will achieve from doing that.

Fyi Gazzuz has done stuff to my car and provided support (both remote and physical) that has significantly reduce any doubt I may have on his actions. So if you wish do not put me in the "fuckboy" category

fuckboys:
Well I see no build up of carbon from the pics tho, but what if all carbon buildup has been cleaned thoroughly prior to the picture taken?. That's another dimension to look Sha, just thinking out loud

Imagine a doctor that takes his sick patient to his colleagues for team work diagnosis yet shield the details of the patient from them.....I hope you will agree it doesn't make sense.

adebowale351:
- Download firmware V21.200.11.00.00
- Use the Universal Master code you downloaded there to generate flash code by inputting your Mifi IMEI and tapping on the calculate tab.
- Disconnect any internet and close your browser
- Unzip the firmware file and run the update file
- It will start to update and request for password, so key in the flash code you generated above as the password
- And wait for update to complete
- Once the update is complete, you can now head back to the page you came from and continue with firmware update and the rest of the procedures outlined there to unlock your MiFi.

Hello, it has a roggers firmware on it, so do you mean I should download the roggers firmware V21.200.11.00.00? Do you have a reference URL please?

Thanks

How much did you buy this one and where? I am saving towards an MPP solar GK series though PIP-3024GK https://www.mppsolar.com/v3/pip-gk-series/

makawhy201:
First of all, the inverter looks great and performing wonderfully okay. here are my few observations on the inverter for now:

- The power changeover is quite fast without a blink except for a beep and a click sound unlike my old Bluegate which blinks and beeps for a while.
- Its charge controller has limiting current which limit the charging rate, i guess according to battery voltage and temperature readings. i am yet to confirm how smart its MPPT function.
- The power input/output ports are not that strong because i broke the live output terminal when connecting it when it was too tight, so i interchange it with the ground terminal.
- i notice the inverter doesnt get SOC/DOD function
- There is little current leakage when i touch the inverter, i guess it is because i dont connect the ground.
- The Wifi rtu i got with the inverter is not working to my satisfaction because its going online and offline. i dont know if it is the inverter or the Wifi rtu that is causing the issue. I wont recommend it anyway cos it is better to go through alternative way to monitor your system.
- I notice when the load is below 25w it switches to power saver and trip off and on again.
- I noticed the float fluctuate btw 27.0v-27.4v eventhough i set it to 27.6v, i guess its temperature compensation though.
- The worst part of all is that, i connected it to PC but it doesn't log anything on the data settings, with i can check any history so far, i suspect its firmware issue.
I am thinking of returning the WIfi Rtu if possible and get a refund and settle for Rpi solution
That is all i notice for now.
Any advice to get the data log properly on PC and monitor remotely will be appreciated.

makawhy201:
I greet my great people in the house....

I just launched and installed a hybrid Must PV1800 VHM 24v 80A MPPT inverter with Wifi RTU (remote monitoring) to relief my giant Bluegate 2kva inverter after serving tirelessly for 7years without a break and my Itracer 60A MPPT charge controller.
i resulted to this when i couldn't figure out remote monitoring on my itracer with Raspi.
Presently i have moved my 2400w panels on Must inverter to see how it works...
i noticed the inverter doesn't display SOC/DOD, data log unlike Itracer.
i will give more review as times goes on.

Still waiting for your experience o!

I bought this attached ZTE Ufi it doesn't see Glo 4g but only MTN, I have not been able to use it because of that since there is no MTN 4g in ekiti so I have put it up for sale but can you unlock it so it can be of use for me?

Still available

JUO:
my Fangpusun 4000va/48v is 15w on 300w load. on 1000w load is 18w, I call it wonder inverter. Review still loading. Price is 450k if interested contact me

Does this have a mppt controller in it?

Still available can further negotiate down sightly

oa1eng:
LUBEX OIL ( new parkageing )

5w30 1 lit N2500
5w30 4 lit N8500
5w30 5 lit N11000
5w20 5 lit N10500
0w40 4 lit N10000
DOT 4 N800 ( brake fluid )

08092284838
08170150399

Bros you never talk whether lubex is full synthetic or not o

fogechi:
Thank You......

Please who has watt meter for sale

I have a brand new one and will give it to you for 8k you may send a pm

fogechi:
Thank You......

Please who has watt meter for sale

I have a brand new one and will give it to you for 8k you may send a pm

mank1234:
Another huddle: The seller is saying they ship from Taiwan. That if the shipper is receiving in China, that she'll have to pay tax in China. Any idea of Chinese tax rate?

Have you been able to work around this? By the way I saw that it's sold on eBay as well and ships to a USA address for free so all you will be left with is getting it down to naija from the USA.

Flocky:
You have not replied me Bro

I guess he was trying to let you know that the cost he proposes may increase/change during order.

Edit: Oops just noticed you quoted a message which you didn't author. Unfortunately I can't delete this message

eddyline:
pls Whats d cost of Your stab and where did you get it from

I bought it 105k sadly the same stab was 50k in 2015, such a broken country within just a few years.

nonoski:
Wow i tot it was only the bluegate brand i met in my friends house that makes such noise.

Maybe i should just go for isolated 5kva stabs for important equipment instead of buying these noisy 20kva central stab

Note that the noise happens only when the current is very low and if/when I use high wattage appliances like iron/kettle/microwave, with the low input otherwise all is fine. If you don't have constant low voltage (<150v) then you should be fine

nonoski:
Pls which brand of servo or stabilizers are most reliable.
Some say Prag other say A & E Dunamis while others recommend Mercury.
Please based on user experience which brand is most reliable (15kva -20kva single phase) with wide input range 100v - 240v.

Thank you

Am using a 10kva Dunamis bought about 3 months ago....works well so far. It has a wide band as well 80v to 260v though once the current is below 150v iron, kettle etc are a no go area and the stab produces so much noise that make me scared of the stab spoiling.