₦airaland Forum

Not around to pick my MBA certificate so tried the portal and requested for certified copy and statement if result, money paid on both occassion, tracking number issued and that is it so far, months now.
Please does anyone know how best to pick certificate (not transcript) if away?.
I thought things should be getting easier with technology but it seems we are just different......
Thanks

Good day,
Will the 75ah Trane be ideal for a 2009 Honda Accord 2.4L 4 plugs?
Thanks.

DelTel:
TRANE.
VB60ah - #30,000.
75ah - #36,500.
100ah - #50,000.
150ah - #70,000.


CENE.
62ah - #23,500.
75ah - #27,500.
100ah - #39,000.
150ah - #55,000.

2009 Honda Accord 4 plug.
I feel vibration and increased engine noise ONLY when I put the gear in reverse.
Suspecting engine mounts too
Is my suspicion likely or are there other possibilities and the likely cost sir.
Thanks greatly
Please still expecting your response on above.
Thanks

luvinhubby:
Between 8 - 21k, depending on how many of the mounts are bad

2009 Honda Accord 4 plug.
I feel vibration and increased engine noise ONLY when I put the gear in reverse.
Suspecting engine mounts too
Is my suspicion likely or are there other possibilities and the likely cost sir.
Thanks greatly

Bodlade:
AND

Weldone sir,
I have always wondered about the use of the nylon, I know it's a way if preventing moisture or rising dampness but won't that means that there is no binding between the compacted soil structure and the concrete work?

Good day dear friends,
Please I need your urgent help.
Months back posted an issue about my solar system and got solution here. Thanks.
Today having a similar challenge.
On my epever charge controller the panel is showing BUT there is no arrow sign to show that power is flowing from the panels to the battery.
Unlike before where the panels sign was not showing so now I don't know what the problem could be please. Please advice me
Batteries may be due for change since more than 2 years but want to be sure before changing.

I also need contacts of good technician around Mowe ogun state.
Thanks

.

tumababa:
Mobil1 5w20

Price & availability please

Sorted, thanks a lot.
Partial connection was what the tech said.

greatchris3:
Two things are involved:
1. Either your panels is damaged or
2. It's disconnected from the charge controller

Thanks greatly,
That's what I am suspecting too.
Thanks a lot

Oshomo12:
@peaceland the panels are not connected to the controller. Kindly look for an electrician around to check the cables. Check the voltage at the terminal of d controller(panel voltage). Do this and we know what next.

Oshomo12:
What time of the day was those pictures taken?

Around 7.
But same situation up till now.
In a layman's language seems the panels not connected or supplying power.
I think it could be cables disconnected.
The coy that installed not good with after service
Suspecting the rainstorms of last week might have done something

Good morning house.
Please I need help.
Have a problem with my solar inverter system.
Last Sunday came home in the night with the batteries fully discharged (red battery light on inverter) as I left a bulb on for 2 days security reasons.
I suspect my batteries may be weak. Almost 2 years now.
However since then its been a challenge getting the system charged via solar, charges with gen (phcn unfaithful this week).
My questions are:
1. How can I know if the issue is with the solar panels or charge controller or batteries.
2. The inverter is supposed to prevent deep discharge, could it have failed?.
Sorry a total novice in inverter terms but I noticed this morning on the epver charge controller the sign shows power leaving battery to bulb but no sign of power entering.
Will snap and attach for clarity. Kindly help a novice brother.
Thanks
Additional: moon sign by the left of the charge controller meanwhile sun is up now!

@026IX.
As appreciation to Topsy I feel I should do this : he is quite good.
Did my building's wiring 2 years back and he is simply the best. Slightly pricey but knows and advocates only quality.
Also takes his time, guess to ensure job well done. After service good too in spite of distance.
Thanks Topsy and thanks to your guys. God bless and prosper your ways. Amen

Thanks sir

mayor2013:
Have your brake rotors checked. Also check your brake pads

GAZZUZZ:
Brake rotors are warped, if within safe limits, resurface, if not replace with Brand new pair.

Thanks sir,

Good morning all,
2009 Honda accord.
Steering shakes when braking at about 80-120km/hour.
New tires, balancing and alignment done twice. Read online about rotors but felt smooth to my hands.
Just want to know where best to go at ikeja axis and likely issues to expect.
Thanks

themonk:
I want to buy all those small buses that carry 7 passengers and give out to a driver for commercial transport within Lagos. I need to know the possible cost at Ladipo.

What Documents do I expect from the seller and what additional registrations and possible cost should I be expecting.

Thanks alot.

Interested in the response to this too.
Thanks

mufutau55:
How much is about the size of carport above?

Hajji M.

Hajji morning Sir.
I am also interested in the answer to your question
Thanks sir

Zane2point4:
Are you looking for this?
Congrats on your new machine o.

Are you trying to give op hbp?

Please - can you assist with the price range for 2007 Camry LE & 2007 Corolla LE sir.
Thank you

.

Thank you @ gbadexy.
to qualify my post - I noticed this only on external (i.e open to weather) walls, rare inside.
This was actually why i am thinking I may have been a little unfair in my judgement. saw only 1-2 inside but quite a lot outside so thinking weather made the drying up a bit faster or something like that.
screeding appears a costly venture. is it possible to screed only sections and not all? (dont mind my questions o)
Thanks

gbadexy:
After being assured by the expert in the house that the cracks are superficial, then I could say you either screed the wall or apply a primer coat of thick emulsion in multiple coats.

Thank you @Chekitaut for this post.
I had a serious fight with my bricklayer over several cracks (tiny funny lines all over the place like spider web).
My initial thought is that he did not use enough cement; he tried to prove he did and then i blamed the sand and him that with his years of experience should have known the sand is not suitable (which was the sand he advised we get anyway).
Now I am thinking I might have been a bit unfair because i know we used the R (although he still should know the nexus between R & cracking anyway)
Now his position is that this can be corrected if i screed the walls; i really do not want to screed anything (cost factor)
my questions are:
1-can screeding help?
2-what other options are available aside from screeding?
thank you

Chekitaut:
Advantage of R
Dry faster, Curing is fast
fast construction work

Disadvantage of R
Require lots of water for concrete works
Tendency to have cracking.

Advantage of N
Watering is friendly any time before complete curing.
Hardly you experience cracking

Disadvantage of N
Slow construction work
Curing is slow

.

Thank you, this sounds fair

Fhemmmy:
Chairman at the top, i hail oh . . . . For a clean and reliable ones, we can deliver at the prices stated below:
2004 CRV EX . . . . .2.2M Naira
2004 Toyota Corolla LE model . . . . 2.1M Naira
Looking forward to being your dealer too.

Oga @Fhemmmy,
Hope you are doing great.
2004 CRV EX sir & 2004 Toyota Corolla LE
Kindly advice on prices sir.
Thank you

soon, very very soon, i too will make my purchsse

enochogaga:
sorry I didn't get u

when starting a gen there is a lever you push to the left and return to right once gen started. issue is tthe lever stiff/stuck cannot go left again. thanks

@ enochogaga,
my sumec firman 3990 eco gen faulty, the 'choke' lever could not return to the initial position it should be on starting before returning it. what could have caused this and how expensive the repairs likely to be?.
thanks

@goldiam, @darol4real, @lolipops, @compliance, @initiate, @BrickMan

Good day all,
I am glad to inform you that the May Edition of The Lagos Apostolic Ministration is here.
By the Grace of God - Rev Olusola Areogun will be ministering live in Lagos this coming Sunday.
VENUE: Etal Hotel & Hall, Plot 30, Kudirat Abiola Way, Opposite First Bank, Oregun - Ikeja
DATE: Sunday, 28TH May, 2017
TIME: 7 AM - 12 Noon
THEME: The Currency of Faith.
I invite you to come and hear the undiluted word of God LIVE.
Jesus is Real!!!, Come and Experience Him!!!.
Thank you.

JUO:
instead of sticking to 2 panels why don't you use the mppt as pwm by paralleling the 3 panels which I believe is the best option for you?

Thanks bros,
the installer did not give me that option so he may not know or might be more expensive to him.
thanks sir

bigrovar:
As stated .. Ignore the soc from the controller. Epsolar are notorious for their false negative state of charge bar. You could charge that battery to full and a minute later its reading 50% full. They used some wack algorithms for the controller soc. Your battery seem to be doing fine.

2 panels might not be enough to adequately charge those batteries. Advise is to use 2 for how and upgrade once cashflow allows

@bigrovar,
Thanks so much sir.
I deeply appreciate your time and comments.
I am sticking to the 2 panels for now.
Thanks.
What baffles me about my installer is why install something that by a simple mathematics may become problematic?.
If I have been told from inception that it is either 2 or 4 panels my options will have been clearer, not to turn around in the middle of the game to want to shift goal post from mppt to pmw.