₦airaland Forum

still recruiting.

rebella:
Hello all,
I am currently massively recruiting for several vacancies within the Oil and Gas Industry, Qualified candidates should send their CV's and all credentials( CV and Credentials together, very important, else candidates will be disqualified)
PLANNER:
• Minimum of 5 years’ experience in maintenance planning for offshore oil and gas installations.
• Higher National Diploma or higher qualification.
• CMMS/SAP experience and know-how
TECHNICIAN (VIBRATION ANALYST) :
• Minimum of OND (Mechanical or Electrical);
• Minimum of 3 years’ experience in the maintenance field on offshore oil and gas installations
• Minimum 2yrs experience in the use of Single / double channel Spectrum Vibration Analyzers.
• Ability to demonstrate basic understanding of operating principles machinery applicable to Oil & Gas operations (e.g. Pumps, Compressors, Turbines, Gearbox, CAT Engine etc.).
• Basic understanding of machinery fault e.g. Unbalance, Misalignment, wears etc.
• Demonstrate basic understanding of rotating machinery phenomenon e.g. Resonance, Vibration, Frequency and Period simple vibration waveform. Surge in compressors etc.
• Ability to write good technical report.
TECHNICIAN (VIBRATION ANALYST)
Minimum of HND or BSc (Mechanical or Electrical)
• Minimum 5yrs experience in the use of Single / Double channel Spectrum Vibration Analyzers; Machinery fault diagnoses using Vibration Spectrum, Time waveform and Orbit analysis;
• Good understanding of Machinery principles and application in the Oil & Gas operations
• Understanding of basic rotor-dynamics
• Good understanding of rotating machinery phenomenon e.g. Resonance, Surge etc. Ability to write good technical report. Attained level-ii training or certification on Vibration Analysis
INFRARED TECHNICIAN
Minimum of OND (Mechanical or Electrical);
• Minimum 2yrs experience in the use of Thermographic Infrared Camera and Vibration Analyzers.
• Ability to demonstrate basic understanding of operating principles machinery applicable to Oil & Gas operations (e.g. Pumps, Compressors, Turbines, Gearbox, CAT Engine etc.).
• Basic understanding of machinery fault e.g. Unbalance, Misalignment, wears etc.
• Demonstrate basic understanding of rotating machinery phenomenon e.g. Resonance, Vibration, Frequency and Period simple vibration waveform
INFRARED ANALYST
Minimum of HND or BSc (Mechanical or Electrical);
• 5yrs experience in the use of Thermographic Infrared Camera and Vibration Analyzers;
• Able to interpret machinery Thermographic Images for Machinery fault diagnoses;
• Ability to perform Vibration Spectrum, Time waveform and Orbit analysis;
• Good understanding of Machinery principles and Application in the Oil & Gas operations;
• Understanding of basic rotor-dynamics;
• Good understanding of rotating machinery phenomenon e.g. Resonance, Surge etc. Ability to write good technical report. Attained level-11 training or certification on Vibration Analysis and a 3day training on Infrared Thermograph

LABORATORY TECHNICIAN
• Higher National Diploma or Higher Qualification in Lab Technology/Science
• Minimum of 3 years’ cognate experience.
CHEMIST
• BSc or Higher Qualification in Chemistry/Geology/Science
• Laboratory Experience will be added advantage
• Minimum of 5 years’ cognate experience.
MECHANICAL SUPERVISOR
Minimum: 8 years’ experience in the mechanical maintenance
• BSc. /Higher National Diploma or Higher Qualification in Mechanical/Production Engineering
• SAP experience and know-how
• Basic knowledge of the process of oil and gas treatment and thorough knowledge of equipment used in oil and gas installations
• Knowledge of aero derivative gas generators and compressors, Fire water pumps, HP barrel pumps, submersible pumps, process and utility valves and Diesel Generators
• Participate in all audit activities (SHES, HAZOPS, RCFA....)
• Ability to read and interpret P&IDs
• Participate and propose solution in interfaces resolution between contractors for all mechanical related matters
• Previous Supervisory/lead experience shall be an advantage
ELECTRICAL SUPERVISOR
Minimum of 8 years work experience in Electrical Maintenance
• BSc. /Higher National Diploma or Certificate (HND) or higher qualification.
• SAP experience and know-how
• Basic knowledge of the process of oil and gas treatment and thorough knowledge of equipment used in oil and gas installations
• Must have knowledge of HV & LV power distribution and controls network, HV & LV motor drives and alternators, Inverters, HV cells, variable speed units, light networks, switch gears and Generators
INSTRUMENTATION SUPERVISOR
Minimum of 8 years’ experience in the maintenance field on offshore oil and gas installations.
• BSc. Higher National Diploma (HND) or Higher qualification in Electrical/ Instrumentation & Control Engineering
• SAP experience and know-how
• Must have handled flow meters in all forms up to automation level
• Must have ability to install and calibrate ultrasonic flow meters
• Participate in all audit activities (SHES, HAZOPS, RCFA....)
• Ability to read and interpret P&IDs.
SURVIVAL SYSTEM ENGINEER
• minimum (10) years’ experience in maintenance on all types of enclosed motor propelled survival crafts, and winches to SOLAS & IMO and /or other applicable standards relevant to the specific equipment
• B.Sc. Mechanical/Instrumentation/Electrical engineering or equivalent
HVAC SUPERVISOR
• Minimum of 8 years relevant HVAC experience in the maintenance field on offshore oil and gas installations
• Higher National Diploma or Certificate (HND or equivalent.) Mech. / Elect Engineering
SAP experience and know-how
HVAC SENIOR TECHNICIAN
Minimum of 5 years’ relevant HVAC experience in the maintenance field on offshore oil and gas installations.
• Higher National Diploma or Certificate (Mech. / Elect Engineering.)
SAP experience and know-how
HVAC TECHNICIAN
• Minimum of 3 years’ relevant HVAC experience in the maintenance field on offshore oil and gas installations
• Ordinary National Diploma in Engineering/Science
• Documented training in maintenance field
SUPPORT ENGINEER
Minimum: 5 years’ Work Experience in oil and gas industry where at least 3 years’ experience with offshore work requirements.
• B.Sc. Mechanical/Instrumentation/Electrical engineering or equivalent.
• SAP experience and know-how
• Experience in Computer maintenance management system, CMMS.
MATERIAL SUPPORT TECHNICIAN
• Minimum 3 years’ experience in the maintenance field on offshore oil and gas installations.
• Material handling, warehousing and logistics
• Higher National Diploma or Higher qualification.
• SAP experience and know-how
RESCUER
• Minimum of 5 years oil field work experience with Trade test I,II,& III or Equivalent
• Must have IRATA Level 3 certification.
FITTER
• Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
STRUCTURAL WELDER- CARBON STEEL & LOW ALLOY STEEL
• Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with SMAW Process
Must be certified as Coded Structural welder with AWSD 1.1
PIPE WELDER- CARBON STEEL & LOW ALLOY STEEL
Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with SMAW Process
• Must be certified as Coded Structural welder with API 1104 and ASME B31.3
COMBINATION WELDER
• Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with GTAW Process
• Must be certified as Coded Structural welder with API 1104 and ASME B31.3
PLC Technician
Minimum of 6 years’ experience in the maintenance field on offshore oil and gas installations.
• Higher National Diploma or Higher qualification in Electrical/Instrumentation & Control Engineering
• Experience in PLC, Allen Bradley, Siemens, ladder logic systems etc. plus related communication interfaces and Human Machine Interfaces (HMI) - and all Machine Monitoring Systems (Bentley Nevada) including GE System 1
Documented training in Instrumentation & Controls.

METERING SENIOR TECHNICIANS
Minimum: 5 years’ experience on Fiscal metering of oil and gas and analyzers
• Higher National Diploma or Higher qualification (Electrical/Instrumentation & Control Engineering
• Experience in the planning, execution and follow up of calibration, preventive/corrective maintenance of the Metering package, all analyzers such as Oxygen analyzers, HC analyzers, Dew point analyzers, oil in water analyzers, conductivity/pH analyzers, chlorine analyzers, Turbidity analyzers, Density analyzers, BSW analyzers and all flow transmitters, including magnetic, ultrasonic, differential pressure, vortex, coriolis, Turbine flow transmitters and other Instrumentation & Controls
• SAP experience and know-how
• Must have handled flow meters in all forms up to automation level
• Must have ability to install and calibrate ultrasonic flow meters
Ability to read / interpret P&IDs
METERING TECHICIAN
Minimum: 3 years’ experience on Fiscal metering of oil and gas and analyzers.
• Higher National Diploma (Electrical/Instrumentation & Control Engineering
• Experience in the planning, execution and follow up of calibration, preventive/ corrective maintenance of the Metering package, all analyzers such as Oxygen analysers, HC analyzers, Dew point analyzers, oil in water analyzers, conductivity/pH analyzers, chlorine analyzers, Turbidity analyzers, Density analyzers, BSW analyzers and all flow transmitters, including magnetic, ultrasonic, differential pressure, vortex, coriolis, Turbine flow transmitters and other Instrumentation & Controls
• SAP experience and know-how
• Must have ability to install and calibrate ultrasonic flow meters
• Ability to read / interpret P&IDs
INSULATION FOREMAN
Minimum of 10 years Work experience with Trade test I,II,& III or Equivalent
SHEET METAL TECHNICIAN
Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
TECH INSULATION FOREMAN
Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
PSV TECHNICIAN
• OND /Equivalent or Higher Qualification in Electrical/Electronics/Systems/Instrumentation & Control Engineering
• Minimum of 3 years’ experience in the maintenance field on offshore oil and gas installation
• Documented training in oil field valve maintenance.

State the role you are applying for and send your credentials and CVs to bella.pepple@gmail.com

Lalasticlala front page please, mynd44

Hello all,
I am currently massively recruiting for several vacancies within the Oil and Gas Industry, Qualified candidates should send their CV's and all credentials( CV and Credentials together, very important, else candidates will be disqualified)
PLANNER:
• Minimum of 5 years’ experience in maintenance planning for offshore oil and gas installations.
• Higher National Diploma or higher qualification.
• CMMS/SAP experience and know-how
TECHNICIAN (VIBRATION ANALYST) :
• Minimum of OND (Mechanical or Electrical);
• Minimum of 3 years’ experience in the maintenance field on offshore oil and gas installations
• Minimum 2yrs experience in the use of Single / double channel Spectrum Vibration Analyzers.
• Ability to demonstrate basic understanding of operating principles machinery applicable to Oil & Gas operations (e.g. Pumps, Compressors, Turbines, Gearbox, CAT Engine etc.).
• Basic understanding of machinery fault e.g. Unbalance, Misalignment, wears etc.
• Demonstrate basic understanding of rotating machinery phenomenon e.g. Resonance, Vibration, Frequency and Period simple vibration waveform. Surge in compressors etc.
• Ability to write good technical report.
TECHNICIAN (VIBRATION ANALYST)
Minimum of HND or BSc (Mechanical or Electrical)
• Minimum 5yrs experience in the use of Single / Double channel Spectrum Vibration Analyzers; Machinery fault diagnoses using Vibration Spectrum, Time waveform and Orbit analysis;
• Good understanding of Machinery principles and application in the Oil & Gas operations
• Understanding of basic rotor-dynamics
• Good understanding of rotating machinery phenomenon e.g. Resonance, Surge etc. Ability to write good technical report. Attained level-ii training or certification on Vibration Analysis
INFRARED TECHNICIAN
Minimum of OND (Mechanical or Electrical);
• Minimum 2yrs experience in the use of Thermographic Infrared Camera and Vibration Analyzers.
• Ability to demonstrate basic understanding of operating principles machinery applicable to Oil & Gas operations (e.g. Pumps, Compressors, Turbines, Gearbox, CAT Engine etc.).
• Basic understanding of machinery fault e.g. Unbalance, Misalignment, wears etc.
• Demonstrate basic understanding of rotating machinery phenomenon e.g. Resonance, Vibration, Frequency and Period simple vibration waveform
INFRARED ANALYST
Minimum of HND or BSc (Mechanical or Electrical);
• 5yrs experience in the use of Thermographic Infrared Camera and Vibration Analyzers;
• Able to interpret machinery Thermographic Images for Machinery fault diagnoses;
• Ability to perform Vibration Spectrum, Time waveform and Orbit analysis;
• Good understanding of Machinery principles and Application in the Oil & Gas operations;
• Understanding of basic rotor-dynamics;
• Good understanding of rotating machinery phenomenon e.g. Resonance, Surge etc. Ability to write good technical report. Attained level-11 training or certification on Vibration Analysis and a 3day training on Infrared Thermograph

LABORATORY TECHNICIAN
• Higher National Diploma or Higher Qualification in Lab Technology/Science
• Minimum of 3 years’ cognate experience.
CHEMIST
• BSc or Higher Qualification in Chemistry/Geology/Science
• Laboratory Experience will be added advantage
• Minimum of 5 years’ cognate experience.
MECHANICAL SUPERVISOR
Minimum: 8 years’ experience in the mechanical maintenance
• BSc. /Higher National Diploma or Higher Qualification in Mechanical/Production Engineering
• SAP experience and know-how
• Basic knowledge of the process of oil and gas treatment and thorough knowledge of equipment used in oil and gas installations
• Knowledge of aero derivative gas generators and compressors, Fire water pumps, HP barrel pumps, submersible pumps, process and utility valves and Diesel Generators
• Participate in all audit activities (SHES, HAZOPS, RCFA....)
• Ability to read and interpret P&IDs
• Participate and propose solution in interfaces resolution between contractors for all mechanical related matters
• Previous Supervisory/lead experience shall be an advantage
ELECTRICAL SUPERVISOR
Minimum of 8 years work experience in Electrical Maintenance
• BSc. /Higher National Diploma or Certificate (HND) or higher qualification.
• SAP experience and know-how
• Basic knowledge of the process of oil and gas treatment and thorough knowledge of equipment used in oil and gas installations
• Must have knowledge of HV & LV power distribution and controls network, HV & LV motor drives and alternators, Inverters, HV cells, variable speed units, light networks, switch gears and Generators
INSTRUMENTATION SUPERVISOR
Minimum of 8 years’ experience in the maintenance field on offshore oil and gas installations.
• BSc. Higher National Diploma (HND) or Higher qualification in Electrical/ Instrumentation & Control Engineering
• SAP experience and know-how
• Must have handled flow meters in all forms up to automation level
• Must have ability to install and calibrate ultrasonic flow meters
• Participate in all audit activities (SHES, HAZOPS, RCFA....)
• Ability to read and interpret P&IDs.
SURVIVAL SYSTEM ENGINEER
• minimum (10) years’ experience in maintenance on all types of enclosed motor propelled survival crafts, and winches to SOLAS & IMO and /or other applicable standards relevant to the specific equipment
• B.Sc. Mechanical/Instrumentation/Electrical engineering or equivalent
HVAC SUPERVISOR
• Minimum of 8 years relevant HVAC experience in the maintenance field on offshore oil and gas installations
• Higher National Diploma or Certificate (HND or equivalent.) Mech. / Elect Engineering
SAP experience and know-how
HVAC SENIOR TECHNICIAN
Minimum of 5 years’ relevant HVAC experience in the maintenance field on offshore oil and gas installations.
• Higher National Diploma or Certificate (Mech. / Elect Engineering.)
SAP experience and know-how
HVAC TECHNICIAN
• Minimum of 3 years’ relevant HVAC experience in the maintenance field on offshore oil and gas installations
• Ordinary National Diploma in Engineering/Science
• Documented training in maintenance field
SUPPORT ENGINEER
Minimum: 5 years’ Work Experience in oil and gas industry where at least 3 years’ experience with offshore work requirements.
• B.Sc. Mechanical/Instrumentation/Electrical engineering or equivalent.
• SAP experience and know-how
• Experience in Computer maintenance management system, CMMS.
MATERIAL SUPPORT TECHNICIAN
• Minimum 3 years’ experience in the maintenance field on offshore oil and gas installations.
• Material handling, warehousing and logistics
• Higher National Diploma or Higher qualification.
• SAP experience and know-how
RESCUER
• Minimum of 5 years oil field work experience with Trade test I,II,& III or Equivalent
• Must have IRATA Level 3 certification.
FITTER
• Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
STRUCTURAL WELDER- CARBON STEEL & LOW ALLOY STEEL
• Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with SMAW Process
Must be certified as Coded Structural welder with AWSD 1.1
PIPE WELDER- CARBON STEEL & LOW ALLOY STEEL
Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with SMAW Process
• Must be certified as Coded Structural welder with API 1104 and ASME B31.3
COMBINATION WELDER
• Capable of welding Carbon Steel & Low Alloy Steel
• Capable of welding with GTAW Process
• Must be certified as Coded Structural welder with API 1104 and ASME B31.3
PLC Technician
Minimum of 6 years’ experience in the maintenance field on offshore oil and gas installations.
• Higher National Diploma or Higher qualification in Electrical/Instrumentation & Control Engineering
• Experience in PLC, Allen Bradley, Siemens, ladder logic systems etc. plus related communication interfaces and Human Machine Interfaces (HMI) - and all Machine Monitoring Systems (Bentley Nevada) including GE System 1
Documented training in Instrumentation & Controls.

METERING SENIOR TECHNICIANS
Minimum: 5 years’ experience on Fiscal metering of oil and gas and analyzers
• Higher National Diploma or Higher qualification (Electrical/Instrumentation & Control Engineering
• Experience in the planning, execution and follow up of calibration, preventive/corrective maintenance of the Metering package, all analyzers such as Oxygen analyzers, HC analyzers, Dew point analyzers, oil in water analyzers, conductivity/pH analyzers, chlorine analyzers, Turbidity analyzers, Density analyzers, BSW analyzers and all flow transmitters, including magnetic, ultrasonic, differential pressure, vortex, coriolis, Turbine flow transmitters and other Instrumentation & Controls
• SAP experience and know-how
• Must have handled flow meters in all forms up to automation level
• Must have ability to install and calibrate ultrasonic flow meters
Ability to read / interpret P&IDs
METERING TECHICIAN
Minimum: 3 years’ experience on Fiscal metering of oil and gas and analyzers.
• Higher National Diploma (Electrical/Instrumentation & Control Engineering
• Experience in the planning, execution and follow up of calibration, preventive/ corrective maintenance of the Metering package, all analyzers such as Oxygen analysers, HC analyzers, Dew point analyzers, oil in water analyzers, conductivity/pH analyzers, chlorine analyzers, Turbidity analyzers, Density analyzers, BSW analyzers and all flow transmitters, including magnetic, ultrasonic, differential pressure, vortex, coriolis, Turbine flow transmitters and other Instrumentation & Controls
• SAP experience and know-how
• Must have ability to install and calibrate ultrasonic flow meters
• Ability to read / interpret P&IDs
INSULATION FOREMAN
Minimum of 10 years Work experience with Trade test I,II,& III or Equivalent
SHEET METAL TECHNICIAN
Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
TECH INSULATION FOREMAN
Minimum of 3 years Work experience with Trade test I,II,& III or Equivalent
PSV TECHNICIAN
• OND /Equivalent or Higher Qualification in Electrical/Electronics/Systems/Instrumentation & Control Engineering
• Minimum of 3 years’ experience in the maintenance field on offshore oil and gas installation
• Documented training in oil field valve maintenance.

State the role you are applying for and send your credentials and CVs to bella.pepple@gmail.com

Aragon1:
For a visit visa, I will suggest one million as closing account balance. If you are working, let the account statement reflect your monthly salary please. Avoid any form of money dumping into the account close to your submission period please. With such acct balance(N1,000,000), it is also advisable to go for average hotels( like 15k hotels per night), during your hotel reservations and cheaper flights as well. Air Rwanda/Kenya will suffice. No one will want to spend all their savings on vacation. These visa officers are smart you know. I wish you the best

Thanks, Can I use two separate account statements to apply, my salary account is my expense account, so the balance is always very low.

Aragon1:
For a visit visa, I will suggest one million as closing account balance. If you are working, let the account statement reflect your monthly salary please. Avoid any form of money dumping into the account close to your submission period please. With such acct balance(N1,000,000), it is also advisable to go for average hotels( like 15k hotels per night), during your hotel reservations and cheaper flights as well. Air Rwanda/Kenya will suffice. No one will want to spend all their savings on vacation. These visa officers are smart you know. I wish you the best

Thanks a bunch

Iamgrey5:
I will say a million.


Nonetheless, for the peculiarity of your visa, I will advise you to have total of the cost of the return ticket, cost of the hotel or accommodation and an additional 300 to 400k as you your account balance

Thanks a bunch.

Iamgrey5:
It is hard to give a specific amount since we are not all visa officers, but shedding more light on the type of visa you are applying for could be a guide.

Thanks for your response, a visitors visa.

rebella:
Hello all,
Please what is an advisable minimum account balance to have when applying for SA visa.

Someone should come and answer me na

Hello all,
Please what is an advisable minimum account balance to have when applying for SA visa.

hopefulLandlord:
oh! so did you like eat it frozen like that or waited for it to thaw? what did you do with it after peeling it. was it easy peeling it?

lool, sorry I keep on laughing at your questions, so I waited for it to thaw, due to the ice the consistency was watery but when I fried it, quite voluminous. It was also easy to peel, just like boiled egg.
It happens a lot to me, I may have to stop keeping my eggs in the fridge at the risk that they will go bad.

hopefulLandlord:
this confuses me in more ways than one. is this frozen egg of a thing a dish people eat?

Lol no, I wanted to fry the egg and found out that they were both frozen, so I peeled it the way I peel boiled egg.

dingbang:
I dont like this food you are eating, its not good for you. Come let me take you out for a fine lunch. Where is your location?

lool...location lagos . I love my suya and garri.

Akposy:
cooked?

nope, got frozen inside my fridge. Realized it was when I tried cracking it.

Suya and garri

Frozen eggs, so annoying

JOB DESCRIPTION
Our company is looking for an experienced Rigging Instructor to carry out rigging training for our clients/candidates.
JOB RESPONSIBILITIES
• Develop rigging training curriculum and materials
• Monitoring and supervising candidates through practical training sessions.
• Perform periodic reviews of training materials and legislation to ensure an up to date curriculum in line with industry standards.
QUALIFICATIONS AND EXPERIENCE
• University degree in relevant field
• Hold an OPITO’s Assessors Award
• Have a minimum of 3 years’ experience as an Instructor
• Have a Level 3 rigging Certificate
• A proactive individual with exceptional team working skills
• Meticulous attention to detail
Email: bella.pepple@gmail.com

JOB DESCRIPTION
Our company is looking for an experienced Rigging Instructor to carry out rigging training for our clients/candidates.
JOB RESPONSIBILITIES
• Develop rigging training curriculum and materials
• Monitoring and supervising candidates through practical training sessions.
• Perform periodic reviews of training materials and legislation to ensure an up to date curriculum in line with industry standards.
QUALIFICATIONS AND EXPERIENCE
• University degree in relevant field
• Hold an OPITO’s Assessors Award
• Have a minimum of 3 years’ experience as an Instructor
• Have a Level 3 rigging Certificate
• A proactive individual with exceptional team working skills
Email: Bella.pepple@gmail.com
• Meticulous attention to detail

Turkey stew.

JOB DESCRIPTION
Our company is looking for an experienced Accountant to oversee the daily accounting functions of our company, as well develop and implement standard accounting procedures.
JOB RESPONSIBILITIES
• Managing daily accounting functions
• Monitoring and analysing accounting data to produce financial reports
• Preparing invoices and payment vouchers
• Following with outstanding payments and ensuring proper account reconciliation
• Preparing payroll in a timely manner
• Preparing monthly/annual financial budgets, scheduling invoice payments
• Developing external relationships with relevant authorities such as FIRS and Banks, ensuring that TBESL financial and tax concerns are up to date
• Payment of expenses and control of petty cash
• Maintaining accounting records and files
QUALIFICATIONS AND EXPERIENCE
• University degree in Accounting, a Masters’ degree will be an added advantage
• Minimum of 3 years’ experience as an Accountant, experience in an Oil and Gas company will be an added advantage
• ACCA/ACA certified
• A proactive individual with exceptional team working skills
• Meticulous attention to detail


Kindly mail your CV's to bella.pepple@gmail.com

JOB DESCRIPTION
Our company is looking for an experienced Accountant to oversee the daily accounting functions of our company, as well develop and implement standard accounting procedures.
JOB RESPONSIBILITIES
• Managing daily accounting functions
• Monitoring and analysing accounting data to produce financial reports
• Preparing invoices and payment vouchers
• Following with outstanding payments and ensuring proper account reconciliation
• Preparing payroll in a timely manner
• Preparing monthly/annual financial budgets, scheduling invoice payments
• Developing external relationships with relevant authorities such as FIRS and Banks, ensuring that TBESL financial and tax concerns are up to date
• Payment of expenses and control of petty cash
• Maintaining accounting records and files
QUALIFICATIONS AND EXPERIENCE
• University degree in Accounting, a Masters’ degree will be an added advantage
• Minimum of 3 years’ experience as an Accountant, experience in an Oil and Gas company will be an added advantage
• ACCA/ACA certified
• A proactive individual with exceptional team working skills
• Meticulous attention to detail


Qualified candidates should send their CVs to bella.pepple@gmail.com before 14th of December, 2018.

ibkayee:
I love grilled/baked fish, looks delish

Thanks

friend of mine has this killer pasta sauce, I have asked for the recipe but can't seem to get it right. I have given up and added my own spin to my pasta sauce and dang ! It was good with an extra kick from the basil I added.

I checked my pantry yesterday and realized I had sone white vinegar, so I decided to make Onion rings.

Senior Corrosion Technologist, Corrosion Specialist or Cathodic Protection Specialist – BSc in Engineering or physical science discipline, NACE CP 4 certification or its equivalent and a minimum of 5 years’ experience in design of CP systems.

Cathodic Protection Technologist - HND/B.Sc in Engineering or science discipline, NACE CP 3 certification or its equivalent and a minimum of 5 years practical experience.

Cathodic Protection Technician – National Diploma or its equivalent in science or engineering related discipline, NACE CP 2 or its equivalent, a minimum of 5 years cognate experience is required.
Lower academic qualification with over 5 years hands-on experience in addition to NACE certifications is acceptable

Cathodic Protection Tester - National Diploma or its equivalent in science or engineering related discipline, NACE CP 1 or its equivalent and a minimum of 5 years cognate experience.
Lower academic qualification with over 5 years hands-on experience in addition to NACE certifications is acceptable.

Qualified candidates should send their CV to bella.pepple@gmail.com

Please urgently needed a deck foreman that meets the following requirements
Evidence of lift planning and deck management training
Have current riggers certificate (for multi-skill purpose)
Have current stage 3 crane operator certificate (for multi-skill purpose)
Minimum of 2 years experience as deck foreman will be of added advantage

Please qualified personnel should send their CV to bella.pepple@gmail.com

Please if you do not meet the below listed qualifications, do not apply.
Evidence of lift planning and deck management training
Have current riggers certificate (for multi-skill purpose)
Have current stage 3 crane operator certificate (for multi-skill purpose)
3 Years of experience as deck foreman

Please send CV to bella.pepple@gmail.com

Vacancy closes today by 5pm.

Hello House,
Recruiting for
1) Project Engineer with 15 Years work Experience in the Oil and Gas Sector including Offshore.
2) Certified Coded welder to ASME/API standards with 10 years in the Oil and Gas industry
3)Rope Access Technician with 10 Years relevant experience
4) Radio Access technician with minimum of 5 years experience
5) Safety Professional with 10 years relevant experience in Oil and Gas industry and Nigerian Safety Certification

Qualified individuals should kindly send their CVs to bella.pepple@gmail.com

Please Only qualified individuals, there's no trying of luck here, as the requirements are quite strict.

Hello House,
Recruiting for
1) Project Engineer with 15 Years work Experience in the Oil and Gas Sector including Offshore.
2) Certified Coded welder to ASME/API standards with 10 years in the Oil and Gas industry
3)Rope Access Technician with 10 Years relevant experience
4) Radio Access technician with minimum of 5 years experience
5) Safety Professional with 10 years relevant experience in Oil and Gas industry and Nigerian Safety Certification

Qualified individuals should kindly send their CVs to bella.pepple@gmail.com

Hello House,
Please I am having issues trying to pay for my SPHRi on HRCI website, any one else having this problem and any suggestions.

An Oil and Gas Company is recruiting for a Business Development Manager with Oil and Gas Experience for its Lagos Office.
Interested applicants must have a solid network within the Upstream Sector. Kindly send your CVs to bella.pepple@gmail.com

Please does any one have a solution . I have been steadily losing contacts after porting to 4G on airtel network. Thanks