₦airaland Forum

n3xt:
Though I do not intend to share my project pics on Nairaland but I’ll be glad to do so.

Sometimes it’s important to compare Apple with Apple.

I’ve never done roofing woodwork of any project on Nairaland with over 1 million naira. Wetin we dey build or buy �

Most times, it’s greed of the contractors that always drive up project cost.

Here’s something done with less 1 million naira. Let’s see any 1.5 million naira roofing woodwork and see if there’s any difference.
Wetin the contractor wan buy �

Good one from you but never say never oo
Size of building determine the roof wood work cost which I believed you know that.

I spent 1.3m for only wood on this project both cost of wood nail and logistic
Capenter 200k

Total 1.5m

Although it’s bigger than your
About 690 meters
Stone quoted roof installation going on right now

SEGLIZ:
that this is on the high side I would repeat.
his supervision fee might be responsible but truth he has placed the real cost as hiding changes that has being embedded in all other workmanship fee.
this the more reason you see some people supervise their projects themselves. get a reasonable quantity surveyor to quantify the structural plan. after doing this run your price check of every material needed to know where to get the best at reasonable price.
if the quantifier or valuer say, you'll be needing 6000 bricks, even if it is on the high you know you'll buy bit by bit, same goes for sand and other materials that would be given in quotation but would never be brought to site. you'll have supervise yourself.
look for a good bricklayer with experience negotiate charges, don't negotiate daily payment with same but place him on contract.
negotiating daily pay would only make things worse. he might charge 3000-3500 for himself and between 1500-2500 for his labours, this way they reap you off by wasting time (days) on the project as result of them extending their work days which would keep costing you more.
but if on contract they don't waste time for they are running at lost spending more time on your project. if your material and finance can take you to lintel or roofing level you agree on what amount he would charge to finish up. the number of day they spent in working isn't your business any longer. you pay them in part (probably twice) then balance them on delivering.

You spoke well, he can get another quotation or to negotiate how much he can pay
But you get it TOTALLY WRONG by advising him to look for bricklayer to handle the job
If problem occurred in nearest future or while construction is ongoing you will be the one to ask him to run down here to seek for professional advice.
He knows the quality of structure he want before he engage the service of professional to handle the job.

ceelog:
This is the most recent pic i could get.
I think this is when it was fully installed about 2 years ago.

Nb: Only this side has the issue

Casement window are fabricated to lap with the vertical, bottom and top frame, and I can see the it was done that way.

Unlike sliding window which are fabricated to move inside the bottom and top railings which always have a gap in between the railing frame and the window leave, this always have hole to drain water away.

Now since you have casement window the chance of water to drain into the inner part to the building is slim unless the window is not well fabricated.

Likely causes of the problem (dampness) in that part of the building is the HOLES on the wall.

Solution: go and patch up all the holes then let’s see the outcome result.

EgunMogaji2:
Oga mi, are you hands on or a coordinator? Nothing wrong with either but I need to know for future consideration. You did well here.

I’m a builder by profession, i handle all my project with all my Workers I.e plumber, tiler, Capenter etc .
Not only me I also have few professionals staff also in my firm.

Thank so much sir, we are ready to handle your project at your convenient time sir.

We have a registered name with CAC
1. Rotech building concept
2. Arbo contractor Ltd

Abolarin91:
Good morning sir, pls how do I get link for my thread, I am unable to get it right. Thanks

Once you log in it will link you direct to your thread.

EgunMogaji2:
I like the structure and ambience of the first two pics. Very well executed.

Thanks sir, I really appreciate your comment
Here is the link to the tread of the said pics


https://www.nairaland.com/3851900/general-finishings-5bdrs-luxury-duplex

Biztech05:
Good innovation boss !
This nice and unique.

Thanks bros

n3xt:
Very nice innovation. I used the same for my ongoing project.

It’s very cheap, fast and easy. It eliminates unnecessary wastage.

Good,you a very correct.

erico2k2:
ahahahah how much/square metre do you charge including installation bro

Western region we charge btw 3500-4000
Easter region btw 4200-4500
North central 4500-5000
Per linear meter, this cost covered below list.

* Example 3-4 bedroom bungalow *
-transport of the formwork to the site to and fro
-installation
-casting of the concrete
- finishings dressing of the joints.

Materials are as follows (separate cost)
7tns of sand
10tns of granite
30-35 bags of cement.
35 length of 12mm reinforcement
10 length of 8mm. “
Used 5ltrs of engine oil.
20 planks 1*12 ( for beam)
10 plank 2*3

Our stone quoted roof material is now ready for installation

erico2k2:
We might do business soon if U cover rivers as Im on that stage

We cover that area too, except Sambisa forest

Mup4life:
do you have a mould for this?

No for now

Jalofun:
I will call you sir

We give quotation for the materials and the installation separate
Final cost is far cheaper as I said

Ok sir

Jalofun:
How much do you charge for this STEEL MOULD type of concrete facial

We give quotation for the materials and the installation separate
Final cost is far cheaper as I said

Nettuno:
And where are you located?

Lagos but we work everywhere
08066619493 call and whatzap

Nettuno:
Please experts in the house, help me look at this quotation for a parapet. The house is a bungalow of 66.5 meters:

The quotation is a bit higher but not too much.

But at rotech building concept
We have another way of making this cast -in-situ
Concrete facial VERY CHEAP now by using Already made STEEL MOULD this will eliminate the PLANK by 90pec bcs we will still use few plank for the round top BEAM.

This will reduce your quotation by HALVE, YES and at the time taking to do it is also lesser

To cap it all you don’t need to plaster the parapet again bcs the final process will comes out neat.

Pics attached are the one we did for some
Member here in diff location.

We did it for the mini flat at the back of the duplex here in the pics

omanzo02:
Rotecch77,
Are different types of chippings/granites used for each of the methods described above?

1/2 granite is well suitable for the cast -in -situ and the semi cast -in -situ system

Stone coated roof loading .....

JustCryptos:
Please what's the roofing sheet used here?

The chocolate roof is regular long span aluminum but of grade A” 0.45mm

The second building is stone coated roof

davodyguy:
Good afternoon all.

I need clarification on the attached image.

My supplier says this plaster sand is 'White' plaster sand and not red, hence demanding from me the price of 'white' plaster sand

Can someone please help to clarify this?

The sand your posted can’t give you grey/white finishing as the one we did here.
I got the supply from ogun state then for these two project.

Check the pics of the one I got then.

Dennis3D:
Good work. Well done

Thanks honorable colleague, how your side

Still on

Watch out for more update

Why going far, we are here for you

We are affordable

More coming

chimexdnice1:
Nice work. please what is the name of the type of wood you use for the roofing?

Parapuru/Itara

kopell:
Hello Rotec. I like to take you back a bit, if you don't mind can you share information like this from earth work to DPM and slab casting too

Ok my lord, I will do that when time permit sir,
Watch out for that and many more expenses so far

jboixxx:
[color=#0000ff] Igemburg Repairpalng [/color]

Thanks so much, I have called him

Hello Any redmi technician here, I need to do some repair.
Urgently
Check my signature for contact

08066619493

More coming