₦airaland Forum

Ogas in the house, please like how much is considered a fair price for the bricklayer charge for plastering of 4bedroom duplex(all en-suite) with 2 units of semi detached 3 bedroom flat(all en-suite)here in Lagos.
CC n3xt, Kolashangone, Spyder880, Egunmogaji etc

Thanks @money121

money121:
Note price not stable

House please whats the current price of a long span aluminium roofing sheet?

CC Money121, Nx3t etc

Yes it has been sorted out since Rockofagesaluminium said he can do it for 3m which means 3.09m is not too high, so I decided to give it to the person that gave the qoute.

Thank you and appreciate

hslbroker2:
@thenext have u sorted these, if not let us know

Alright baba thanks

n3xt:
I really can’t say much on this baba.

Thanks brotherly

RockOfAgesAlumi:
Good afternoon boss with quotation am looking at the person is till on the line but if you don't mind I can receive that with BUGLARY at the rate of 3m
While without BUGLARY is 2.450
Please where is the location of the site and if you need sample of work done chart with me on whatsAPP to discuss better 08069609983
Thanks

Oga’s in the house, please can you help me review the quotation below for my windows both with burglary embedded and without burglary.
CC n3xt,michilins, hslbroker etc

But how about reptiles entering the house via the gate.

EgunMogaji2:
I love my see through gate. I’ll personally never have another non see through gate again.

Lol � thank you sir.

n3xt:
Mushin.

@n3xt, please aside from mushin where can one get affordable and durable doors in Lagos?

Ok, thanks. 1, 2 & 3 above are they wooden or hdf doors?

n3xt:
Call Alade +234 802 301 9008

You can equally ask him to make a custom design for you.

There are several guys there making good doors in Mushin.

Ok, please how can I get the address of the market in Mushin. Thanks

n3xt:
They’re locally made doors from Mushin. Take a visit to the market and get some more beautiful designs.

Please were these doors made in Mushin or they were imported and sold in Mushin?

n3xt:
1 & 2 = 55,000
3 = 45,000
4 = 58,000

Cost excludes key/lock, hinges and installation.


________
I’m not a seller though

Thank you Oga spyder.

spyder880:
It's the very sa6m amount, BUT

You will have to pay those lifting blocks to take the blocks upstairs and drop for the masons and their boys to use and work upstairs. So the extra charge you will pay is just for block lifting.

Ogas in the house, please is it the same amount bricklayers used to charge for blockwork for ground floor and first floor? Or the first floor is a little higher than ground floor?

Are you into installation of sachet water (pure water) purification set up?

rotecch77:
If your water salinity is <750 electrical conductivity test) mean it’s class 2 which is medium salinity.

Reverse osmosis (ozone) with 4-6 membrane with full set of fiber plant will solve the problem
This will cost you btw 1.5- 2.5m
Full setup

How about Ipaja sir?

n3xt:
Are you ready as in right now?

If yes, it can be delivered to you between 2900 - 3000 around sango otta area direct from a Lafarge distributor.


_________
Anyone in need of cement direct from Lafarge around Ijebu Ode/Sagamu/Ogijo can get in touch with me.

2900 excluding offloading fee (N50)

I would like to give feedback on my transaction with mountmoriah regarding the woods i bought from him yesterday. I saw his post here on nairaland that he is into wood business, lo and behold his post came at the right time that i needed to make a final decision on who to supply me my decking woods. I contacted him via whatsapp and he responded within a seconds and we finalised the deal within 30 miunutes. I linked him with my Engr. for further discussions and both agreed to go on with supply within 5 minutes. Mountmoriah supplied my Engr with 1by12(600 pieces) and 2by3(300 pieces) the following day, the woods are very good and very complete. Mountmoriah has been one of the best supplier (if not best) in term of responds to customers and sticking to agreement. Please kindly patronize him for your wood supply

Ipaja

megacontrol:
Where is your site @?

Where we need it is @ Ikate.

Let’s work this out, I need 8tons.

megacontrol:
I just did a drive round town today doing market survey on this.

Local = 250k - 260k (depending on distance)

Tiger TMT = 305k

HiTech TMT = 310k

How many tonnes are you looking to buy and where is your site?
I am currently speaking to other builders around me if we could consolidate our orders and load directory from the factory in Ikorodu. I am sure we can get them to bulge with a 15T order though they normally set ~20T ish as minimum.

4 bedrooms duplex with 3 bedrooms semi detached. The building size is around 330sqm.

n3xt:
What’s the size of the building where you use 5200 blocks?

#justasking

I recently did foundation of 6 units of 2 bedroom semidetached bungalow and we only use 7,000 blocks for all.

We use 410 bags of cement for all the building.

______
Note: we didn’t do raft foundation o

I think this is somehow high. I did block work from German floor to decking level last 2 weeks and all what your baba lati listed cost me 450k which I was even thinking it was in the high side. Note: Total number of blocks(9 inch) was 5200.

BuildingProject:
Someone should please help me to review this job discussion, it's like my bàbà láti is ready to build his own duplex from this labor he is just calling. Engineers in the building. Please assist in going through. Just finished the German floor last year December.

It always looks simple for me. I like simple thing

spyder880:
Any special reasons boss?

Cost consideration, aesthetics, heat insulation?

For me flat roof.

spyder880:
Let's do this again, which do you prefer, and why?

The high roof, or the contemporary style?

#3350 is on the high side.

twinskenny:
You know anybody wey need Dangote cement for.Lagos, I get 3600 bags to sell.
Selling at the rate of #3350

Someone forwarded this to me in case

I seconded this, please the aggrieved party kindly accept the apology and move on. A lot of us(people) are benefiting from this thread a lot as a kobokobo project owner. Please accept our apologies

CC
BankeSmalls, Rexology etc

Godisgreatest1:
I apologize to all Igbo's for the comments made concerning the transaction that went wrong.

It may be surprising that the same trader that is called a 'thief' may be the same trader that some people are searching for the best sales and services.

Several artisans have defrauded, cheated, plagiarized, threatened and insulted clients here on this thread, but no one has heard of their tribes.
Some don't even post comments here again.

We have an artisan here that sells granite that was once 'axed' by another artisan for a transaction that went wrong, to the extent that a thread was dedicated to him, yet nobody heard of his tribe, till date I haven't heard and I don't want to hear, that's not my interest.

Just went through the last 4 pages of this thread and still can't translate it into a meaningful conversation.

Please this is enough. Apologies have been tendered. I follow this thread to learn, not to read about tribe.

Since on Saturday there are questions I want to ask about septic tank and block sizes, but I have been holding it because I am fully aware that in a sane community this sort of argument discourages intelligent minds!! Please let's embrace peace. when all this is cleared I will proceed.

This stealing of a thing is in a typical Nigerian man(the one close to us are artisans), everybody are looking for shortcut to live big.
That’s why I stick to my Engineer, his service charge and that of his work craft( Bricklayer, carpenter, iron bender etc) is higher than what I see on nairaland but belief me my engineer will drop your last kobo for you. He will use best practice to reduce cost. So I don’t experience all this stealing of a thing. I sleep well when am home and I concentrate on my job at office while job is ongoing at my site.
This is the second house my Engineer is building for me and his honest and trust is second to none.

Thanks appreciate

9icetoo:
It could be any of the accessories that the belt turns such as the compressor, alternator, water pump, idler pulley roller etc. All these will have to be examined. Any with unusual noise may have to be replaced.
I had an issue like this on a skoda but it was the alternator that was the culprit. Merely spinning it didn't indicate any problem. The mechanic however had seen something similar recently and his guess worked.

As for the original belt, you will get it in trinity close to ladipo or go to radautoworks at lekki.
She is on Nairaland as well.
Gazzuzz seems to be going the German way so might take a look at the car.
I do not think your problem is a fake belt. Even the fake belts last a long time.
Something is creating so much resistance to the rolling motion of the belt causing it to collapse or cut.

Those mechanics said it’s tokunbo belt and collected 5k for the purchase of the belt. Who knows may be it’s inferior belt. Please how can I get original belt

Thanks

Midoda:
What quality of belt are you replacing with? Examine the engine pulley and or rollers/adjuster.

I did not change anything. Thank you


quote author=Mottomata post=96518962]Did you change any component in the path of the fan belt? Like compressor etc.

Do you hear any unusual sound/noise?

You should conduct a visual inspection too or get someone qualified to check for you[/quote]

Please house what can be the cause of frequent fan belt cut? My Mercedes Benz (GLK350) fan belt has been cutting to pieces this days, within a week I have changed 2 different fan belt which I think is unusual. The belts got collapsed while driving. I have been using the car for over 3 years now and I have not experienced such before.

I have read alots about him on this thread but I decided to give a trial which for now he has performed up to my expectations. I will surely give feedbacks for every delivery from him. Stay tuned

One4me:
He used to do very well before he went Rogue! Some years back (up to around 2014) he was the numero uno of Granite and Stone Dust supply on this thread.
He supplied me five 30Tons and four 20tons granite (and lots of Stone Dust) some years back and they were okay, except the last one when he started telling me stories.

I want to think and hope that he is begining to realise the importance of keeping it honest and simple.
I wish him well