₦airaland Forum

Kendumazy:
This is nice.

i have a plot to sell in the estate,feel free to call

Luiz1:
Still available? I wld like to buy one.

I THINK MOST OF THE PLOTS ARE SOLD OUT, I HAVE A GARDEN VIEW PLOT FOR SALE,YOU MAY WISH TO CONTACT ME FOR FURTHER DISCUSSIONS

08034496886

tayor3:
I buy complete mansion there, and na like play I take buy am o...my friend wey no follow buy dey regret now.

thats great,if your friends are interested i have plot of land to sell inside the estate -GARDEN VIEW

kayceerilyn:
But why is Lala super excited??

Because the bottom pot of the snake will be left for him to eat as it contains the "orisrisi of the delicacy

Issame:
A Young Boy was seen Trying to Stop The Gasoline Leak From a Tank Truck With a piece of Rag, in Lagos, Nigeria.

Watch Video HERE


https://www.youtube.com/watch?v=aNyKCBoRHd0

Source:
http://nairaplus.com/2018/07/young-boy-seen-stopping-fuel-leakage-from-a-tank-truck-with-a-piece-of-rag-video/

That guy was not stealing from the tank, what has happened is that the tank is leaking and finding wrong alternative method to prevent the leak which would have been detected earlier before loading the truck and not attended to,

My suprise is that with this scenario you were still driving and filming at the back of the trailer undermine the OTEDOLA TANKER FIRE incident, sorry to saying this I think you don't value your life

horlermesheye:
SOLD.

Congrats ,what was the range please

horlermesheye:
Available n

What's the price please

afangsoup:
You're not an Urban and Regional planner, you are not a highway planner/designer/surveyor/engineer, you are not an authority in urban circulatory networks you haven't carried out proper research on what makes these roads experience delays, your write up is based on mere say and here-say which isn't objective, not factual and isn't scientifically proven, and don't bridge knowledge gap and can't proffer solutions to the challenges posed.


Consult a qualified town planner who's a highway specialist to explain better.

Cheers!

These are discourse that require Expert judgement to be able to have clearer view of the problem definition
Great input sir

cintowolex:
Good day Naira lander
I want to buy suv for my wife..2008 Toyota RAV4 VS 2008 Honda CR-V..which one better....advise pls

Go for RAV 4 .durable and reliable ,

mufutau55:
Sorry, no advertisement in this forum. Your post has been deleted.

Hajji M.

Baba himself,doing the needful

Khemhyte:
........some mins please
My people, make una help me ooo, I can't view my comment after posting it

Go and check your voice mail ....

Acidosis:
Ignorance.

Do you know by merely making reviews and comments on Nairaland, you tend to improve your writing and narrative skills? Some people have made more money [by "wasting their time" online] than you can ever make from your productive offline time.

Some people make comments just to ensure that people see their signatures (adverts). That way, they save cost on traditional advertising.

Having said that, mobile users and those who fail to logout often are prone to high rates.

If you've not been making waves, contacts or returns from your posts, it's high time you changed your perception.

I couldn't na gree with you less, good conjecture of the narrative

PLAESE help me tell the guy that made that statement about time wasting to manage this

sako28:
Sir,
what you mean that granite is crush Limestone?

Sir,
Granite is Igneous rock
Limestone is a sedimentary rock (due to deposition of sediment)
Metamorphosed Granite is Gneiss.
So for our chipping in Nigeria it either Granite or Gneiss they crush to different sizes. why we have more of Granite in the North, west and middle belt of Nigeria is due to the basement complex. The little granite you see in southern Nigeria are due to intrusions through fault and fractions in earth crust.
On the other hand the Limestone deposited is favor by deposition in marine environment.
Limestone metamorphose to marble (under very High temperature, pressure and other complex conditions)
Summary: Limestone Not Granite.

Right. Geography 101,Rocks and sediments sir, nice one !

[quote author=tkdrafter post=68198194]Is this still available?[/quote

still availablle,please call to further this discourse -08034496886

spyder880:
This is a refreshing dish, I was promised by one of the workers on site to take me to a place where the best amala dishes are served. But I am no stranger to amala o, been eating amala a lot in my days at Ninth mile, Enugu. Iya Sadia is the best.

Nice one bros,one Nigeria which we clamor for will one day be realistic in this our generation , all the best

spyder880:
Work in progress, by next week we shall be doing the reinforcement details. ........

Following astutely,nice job.

Please just manage this for lunch after hard work

profjp9:
Off to Luxembourg

Safe trip, buy plantain chips for us on your way back

EgunMogaji:
How much of that $5,300 goes to:

Housing
Electricity
Transportation
Taxes
Grocery
Fuel
Insurance

You guys need to stop this unequal comparison.

Housing cheapest $650
Electricity $75
Tax. $675
Grocery. $350
Fuel. $500
Insurance. $150
Subtotal approx. $1800

Other unquantifiable monthly expenses put at $1500

How much will be left then you talk of savings , you just discover no basis for comparison unless you earn in dollars convert to Naira to spend in Nigeria , so my question is wont one I cure expenses before coming home or are you going to be living and eating in somebody house for free

Clothing

spyder880:
My house in the village was built in 2015, that was when most building materials were very cheap. The following prices changed in the 3 year gap between when I built mine and now.

2015 vs 2018 building materials prices

1. Cement N1,750 - N2,600
2. 16mm rods N1,900 - N3400
3. 12mm rods N1,050 - N2,130
4. 8mm rods N650 - N1,050
5. 1x12x12 plank N670 - N900
6. Cost of transport and workmanship also increased marginally.

Due to the following prices, expect about a 50% increase in between the cost of building this house then and now.

Thank you.

Oga spyder ,

This one you are calculating ,using differentiation,calculus to estimate cost you want to put us for a looooooong thing

ANSOM:
Could this be an impending volcanic eruption?

Before a volcano erupts, there is normally an increase in earthquakes and tremors near and under the volcano. These are caused by magma (molten rock) pushing upward through the rock under the volcano.

The ground may crack open and allow steam to escape.

Gases such as carbon dioxide and hydrogen sulfide, a gas that smells like eggs gone bad, frequently are present and escape in seams along mountainous rocks.

Hot springs in the area around the volcano may appear or change in appearance and temperature.

It is really shocking that so-called "Environmental Analysts" couldn't decipher what is about to happen and "Health Experts" are advising residents in the area to take "2 tins of milk daily to prevent a health crisis.

So laughable!

Lalasticlala

Very plausible comments above, by all standards I will go with your explanation of the situation at hand,a thorough soil investigation needs to be carried out as all the signs point to impending volcanic eruption ot threats within that local in the nearest future

kakakibuy:



WhatsApp: +436602306454 Kakaki Autos

Please what's the landing cost for Peugeot 1007. 2004 to 2009 models,you can send pictures

Cheers

aonag:
you guys should stop making this statement! how would you know this if you have not tried it before?

Please if you have tried it can you please do a cost benefit abnalysis of using lafarge mix as against the traditional decking ,I hunbly await your submission


FYI! Search for this thread and read through-Construction if fire station at yaba

architectB:
Good evening @EgunMogaji... Thanks for your comment. Concerning your question, i regret to say that the Ready mix does not save cost at all ooo; as a matter of fact, it is a lot more expensive than the manual method that most people are wont to use.

As at today, the cost of Ready mix (from Lafarge) is about 40k per cubic metre for grade 25 concrete while you can get the same mix (albeit not as pure as you might want it to be) for between 20 - 25k if done manually.

On large projects, Ready mix is advised but on this project (which is small), we were just trying to make a statement, being the first project we were getting from the institution.
Apart from cost issues, Ready mix is waaaaay better than manual in every regard... I mean you can spend 2 hours to cast a slab that will otherwise take you at least 10 hours...

Rubbiish:
Isn't this lafarge company gonna be more expensive the regular labour approach?

It will be very expensive for the regular decking and one might have logistic challenges if your site is nit easily accessible to truck

coretechng1:
House please I heard someone wrote here that you can get Lafarge company to come around and pour concrete on your decking instead of using the normal labour intensive method.Please does anybody have idea about this ? Is it truly cheaper to get Lafarge to come and pour the concrete for decking? Are there other alternatives? Can you help with estimate on how much materials will be required to deck a 100sqm floor?
Thanks in advance.

This service dos not come cheap ooo,

Cosplay:
The VIN reports with the photos would give you a better idea about the true state of the vehicle.

As for the categories of vehicles that may be good purchases, that's a personal decision, however I'd stay away from flood titles, vehicles tagged Junk/Export Only/ Parts Only/Certificate of Destruction.

Some buyers prefer vehicles with no front, engine or chassis damage, some with no SRS damage, etc.

In my experience Hail damage is one of the more reliable damage categories to bid on.

Well,it still boils down to lottery game-game of luck and chances,from your last two narratives I believe we are all on the same page with other members on this discourse but can see your only grouse with them is "Non disclosure" which seems not to be coming from majority of car dealers on this forum.

Well keep up the good job

Cosplay:
If you did you would notice the fine print.

A vehicle can be severely damaged and overheating and smoking and still be tagged 'runs and drives'.

Okay , I believe my naivety resulted in my loss, but I would want you to know that even at source misrepresentations comes to play .

Aside from clean title cars ,which kind of title would be safe for one to buy and have rest of mind

Cosplay:
Did you look up the true implication of that 'runs and drives' designation?

Please enlighten me on the implication ,my thoughts are by all standard the car is expected to work at optimal level without hassles ,just buy and drive

calculusx:
1. Everyone is a Victim when it comes to Vehicle History. In my 10years experience I still fall victim once in a while. You have no idea the type of crime that go on in USA & Canada. Forget about Vehicle History now. I once bought a Nissan Pathfinder with Clear Title Accident Free which I thought was Brown Color, Vehicle got here and turned out to be White Color. The whole exterior was prime in brown to deceive buyer. In such a case who do I hold responsible?

2. You probably didn't get my point here. My Point was to let you know the extent of crime that goes on over there. Majority of which were unbelievable especially for those that believe so much in white people. Not all whites are white.

3. Washing a Vehicle Title is the easiest thing to do. I created a thread here in 2009 on a badly accidented 2007 Nissan Quest. It was repaired and the Title was washed and report became Clean. It's that simple to do provided it's repaired to Standard. Don't believe in all what you read online. You will understand better when you'v been there before. It's a felony crime but majority got away with it and we Nigerians fell Victim because we believe soo much in them

Your points are valid , a lot of deceit,fraud,misrepresentation also takes place in US,Canada when you buy cars fir shipment to Nigeria, I had a bitter experience in 2015 bought a Mazda CX-7 with a "run and drive" title ,car arrived in Nigeria smoking, engine overheating, minor frame damaged, all these flaws were nit disclosed ,after spending over N2.45 million as landing cost to put the car in order I spent over N450k, bought turbo charger N150k,timing chain and cam rod -75k other parts and oil and workmanship took up the balance .

So I would enjoin all dealers despite these frauds or misrepresentation of vehicle title from the source of purchase should go extra miles to get he current status of vehicles and make it open to prospects as this will reduce mistrust , I will readily buy a vehicle that has an accidentEd title than one with a purported "clean title"

spyder880:
Please, who has contacts for anyone who can do polystyrene parapets in Lagos area? Some people has been asking me about it.

Try teewhy on the platform ,that's the guys handle

Rubbiish:
I am not supporting artisans not giving accurate measurements oo....
Just that it is something that i noticed from some tilers, they come with tape & do measurement, but their results are always different from the actual calculation.

Okay ,the difference in results between the physical and the guesstimates is excess gains they make from the job.this is what Pisses me off most times I engage people to do anything for me, once I observe this trend I immediately discontinue further engagement with the person,had a similar example with somebody between a space of two months price shifted from N400,0000.00 to N1,100,000.00 this was a service that price can be verified from different service-providers.we are truly our own problems-"GREED AND CORRUPTION"

Rubbiish:
Which is more expensive btw stamped concrete & interlock tiles?

Most of these artisans don't take measurements, they most use eye guage & judge with past experience, but they just come with tape. Same apply to tilers for room, many dont measure.

I beg to differ on your position, as a professional you must be seing to be above board in your dealings based on the ethics of your profession
How can an artisan come to a site to give estimates without using his tape to do the physical measurement to ascertain the dimensions of the clients need .that to me is a red flag, you don't just estimate by just looking at the plot it's wrong ,that artisan is a thief and that the way most of them behave to scam naive people of thier hard earned cash

rabcnesbit:
Peace and good health to you all. I don't know whether I should cry or laugh! I engaged a stamped concrete artisan to visit my site for measurement and then quote. Below is the quote he gave! Now, bear in mind the site is just over 1 plot (about 700sqm, with a building already on it, so the total area that needs stamped concrete is probably less than half of 700sqm). I am not sure which site this guy visited or where he studied mathematics. His quote shows a total area of 2,277.4 sqm, resulting in a cost of just over N8million to floor a compound of less than a plot (and not even polished stamped concrete, but the cheaper unpolished one)! Is this guy for real!

Quite appalling.this is the life of a typical Nigerian just imagine,GREED AND CORRUPTION has really eaten into this "stupid" artisans medulla .when spyder88 was dissecting the Nigerian society it's as if he was hit patriotic, we need to have a paradigm shift as a people,nation by purging ourselves of these vices .

What a disappointment. I wish I am the one he sent this quote to ,he will explain where he got 2000square metre plus from a land up that is about 700 square metres