₦airaland Forum

Comfort is the highest satisfaction of the soul! When driving on the road, it is best to experience being in a comfortable zone and not walking slowly. You may ask how you can ensure that your comfort is not compromised. There are many ways to make your car more comfortable, which in turn leads to a comfortable ride. Here are some of the most common settings you can choose.

How to make your car more comfortable?

Whether long trips or daily travel to work; machines are used by most people around the world. When a person spends a lot of time driving his car, a feeling of comfort becomes a necessity. Read on and explore
interesting ways to improve your amazing driving experience.

1. Your seat determines your comfort.

There is always a default position for your car. In most cases, the situation does not suit drivers. That's why; it becomes necessary to adjust the seat to make your car more comfortable. You can change the tilt of the seat as well as its height. It all depends on you which position suits you best. Make sure the settings are such that you can easily view the mirrors on both sides of the car.

2. Give Grip to your phone

Handling the phone together with the drive is not a good practice. Nor is it comfortable and safe to confuse the use of the phone with driving. This is the reason why you have to invest in gripping strips to support your driving experience. These magnetic tapes can hold your phone firmly, no matter how sudden it turns. You can touch and answer calls without getting a phone.

3. Maintain heating and cooling systems

If you plan to drive in hot summers, AC should work the best. The same goes for maintaining heaters in winter. For both systems to work properly whenever necessary, make sure someone is comfortable while driving. Always make sure you periodically send your car for regular inspection.

4. The scent that keeps you going

Because of closed doors and windows, your car may sometimes develop a strange smell. Driving with such an unpleasant smell can make the whole journey uncomfortable. You can install car fresheners to keep the atmosphere fresh and soothing. When you have the scent around you that you love, the driving experience is wonderful and comfortable.

5. Keep Airbed Handy

When you travel to the forest or the beach, there are likely to be several stops. Fatigue and short rest are quite common. That's why you need airbeds. These are air-filled beds that can be inflated wherever they stop. You can sleep comfortably and expect to feel fresh after a nice sleep.

6. Seat fastening systems

It is common that things spread to car seats. This can make your car messy and the goods can slide and turn back and forth. To make your car comfortable, it is important to install seat suspension systems. These are a simple addition to the rear seat back seats and can be useful for hanging umbrella, bag or any polyethylene. You could also refer to the driving instructions for safe steps in the mud.

Source:
http://www.eliancars.com/2019/01/6-ways-to-make-your-car-more-comfortable.html
[img]https://1.bp..com/-K6APESUy8yQ/XDmKzlS81rI/AAAAAAAAB-4/UtQK-xomE_Y36K7rdH16QS6BU1HEj-vNACLcBGAs/s1600/comfort%2Bdriving%2B1.jpeg[/img]

5 Common areas that can cause a burning odor from your vehicle: 1) The clutch - can be caused by driving the clutch or by an exchange, 2) The brakes - can be caused by heavy brake use or by braking, 3) an electric Short circuit, 4) the heater - can be caused by deposits in the system or by a defective engine or 5) burning oil.
There are several causes that cause a burning smell in the car. Normally, it burns when two surfaces rub against each other. If you notice engine odors, stop driving immediately.

>> Car smells like clutch

Often a burning smell comes from your clutch. This can happen if you change gears. This is a special kind of burning, like burning newspapers. Basically, the face of the clutch burns down when the clutch slips. It smells like paper because the surface
of the coupling is actually a kind of paper composition. It is important that you learn how to use the coupling correctly to stop it. Do not drive with the clutch. If you do this too often, you may need to replace the clutch.

>>The brake

You can also develop a burnt smell from the brakes. This occurs when you brake or brake very hard. If you drive down a very steep hill and brake, that friction can get so big that your brakes smoke. This is not a problem if it happens occasionally. However, if you notice a burning smell from the brakes during normal driving, there is a problem. A caliper piston in the brakes may have gotten stuck, dragging the brake. If this is the case, you need to fix it. Another common cause of burned brakes is that people leave the handbrake or parking brake on while driving.

>>Electrical short circuit

Burning can also occur in the event of an electrical short circuit. The plastic around the wires, connectors or fuses will melt or burn, producing this smell. If the electrical system is not repaired, serious problems may occur when driving the vehicle. It's best for a mechanic to fix the problem as he can connect your car to a computer, then quickly tell the operator where the electrical problem is.

>>Burning smell from the heater

You want to check the ventilation of the heater if you notice a burning smell. If you have not used your heater for a long time, there may be dust in the system. However, if you use it regularly and there is still a burning smell, pine needles or other debris may be in the trigger. Many people find that a plastic bag in the engine generates a burning smell. The heater itself could break and cause a burning smell of antifreeze entering the heater vent. You can also melt parts of the heater core itself, which causes combustion odor. This is usually in the heating engine. If the smell from the heater gets very bad and you have no deposits in the engine, you probably need to check the mechanics of the heater.

>>Burning oil

If you have an oil leak and then fall on the hot exhaust while driving, you will smell burned when you get out of the car. This phenomenon can be very obvious when driving on big hills, as the exhaust gets very hot. You cannot tell the burning smell in the car, but when you get out of the car, this is very clear. In addition, the burning oil can produce vapors.

Source:
http://www.eliancars.com/2019/01/burning-smell-from-car-understand-what.html#more
[img]https://1.bp..com/-7qLWfbrsDMc/XDgloDypA3I/AAAAAAAAB-s/22EBL7U1HQYByyNYv4tyV2EM_MWaV8m_QCLcBGAs/s320/bad%2Bsmell%2Bfrom%2Bcar.jpeg[/img]

A fuel pump is one of those parts in a vehicle that you normally do not think about until it suddenly comes to you in the middle of nowhere. The fuel pump is in charge of pumping fuel from a vehicle from the tank to the engine and a failure of the same can be disastrous. Most cars now use an electronic fuel pump that is located in the gas tank. The electronic system works by spraying a fine spray of fuel into the engine chambers and is operated via a computer operating system. The fuel pump has two goals, namely pushing fuel from the gas tank to the fuel injector and creating the right amount of pressure to ensure that the right amount of fuel is supplied to the engine, regardless of external conditions.

Follow these points and it will help you to avoid a disaster:

1) Replace the fuel filter regularly

A fuel filter generally protects the injectors and the engine from damage caused by contaminated fuel. A clogged fuel filter from deposits in contaminated fuel means that the fuel pump has to work harder to force fuel through a limited filter. This leads to a load and accelerated wear of the ten small components
in the fuel pump, which ultimately lead to failure of the fuel pump. Replacing the fuel filter will occasionally reduce the wear on the fuel pump, leaving it for a long time.

2) Buy high quality fuel

Always make sure you buy your fuel at reputable gas stations to avoid adulterated fuel. Purchasing a good fuel can save the fuel pump from damage.

3) Do not buy fuel while a tanker fills the station tanks

When the fuel is pumped into the tanks, the debris in the tanks is stirred, and if you fill up with fuel at that point in time, that waste ends up in your fuel tank. This leads to clogging of the fuel filter and eventually to the failure of your fuel pump.

4) Avoid driving empty

Sometimes we just forget to fill up the tank, but there are people who are notorious in driving while displaying on E. What many do not realize is that they are slowly killing their fuel pump. When the pump pushes the fuel to the engine and the excess fuel is returned to the fuel tank, the fuel components and fuel in the tank are cooled. In a situation where there is little fuel in the tank, the fuel heats up much faster, resulting in overheating of the fuel tank. If this happens for an extended period of time, the pump may fail.

5) Ensure the bottom of the tank is clean

When replacing a fuel pump, it is important to remove all parts from the bottom of your gas tank and to ensure that no dirt gets into the fuel pump while you reinstall the fuel delivery unit. There is no point leaving dirt in the tank, which can eventually lead to another failure.

Source:
http://www.eliancars.com/2019/01/5-amazing-ways-of-preventing-fuel-pump.html
[img]https://3.bp..com/-HgZxEqQNwTY/XDZ9DbyADhI/AAAAAAAAB-g/XSnOgkGbjAcalGsSCcEd8n1zxk_AWo_TACLcBGAs/s320/fuel%2Bpump.jpg[/img]

Is there someone who doesn't want to drive faster? All engine heads enhance engine power to make their vehicle more efficient and effective. Even if you are not enthusiastic about the mechanism, you must love a little more power in the combustion chamber, aren't you? In fact, who wouldn't die waving these adorable teenagers when they cross their car on the highway?

5 easy tips to increase engine power

Your car needs to be burned more quickly in the fuel chamber. You cannot do this by adding oil due to limited engine capacity. The most important thing is to change it in order to be able to work more with air and fuel. You can do these five things to increase engine power and drive your car faster
than ever before:

1) Use cold air intake (CAI)

It is the cheapest and easiest way to increase torque and horsepower. CAI is an aftermarket unit that helps to draw air into the cold and dense. Air mixes with fuel, and together they burn to produce power. Condensed air means more air and more air in the cylinder to burn.

2) Reduce weight

It makes sense that a light car moves faster than a heavier counterpart. You need to replace the big parts, not just in the engine block, but in the lighter parts of the entire vehicle. Get rid of extra seats, throw unused items into the frame, replace glass windows with acrylic and replace the traditional brakes with the brakes. These things make the car more aerodynamic and help the engine use more power.

3) Install a performance chipset

There is an automatic system that controls the operation of all the latest car models. For example, an internal computer system can control anti-lock brakes, gas burn speed, timing, etc. There are after-market vessels that can hack into the system and override the factory settings. Replace the factory chip and use it to increase engine power.

4) Attach the cat back to the exhaust system

Discard the factory exhaust pipe and the exhaust silencer and attach the new decoupling system behind the catalyst. The combination of a high flow cat converter and an exhaust fitting increases airflow and torque to improve horsepower. It really works by pushing the exhaust fumes faster, increasing space for air and fuel.

5) Invest in a forced induction system

Bring the compressor or turbocharger to the engine mechanism and see how it increases torque and horsepower. These tools can increase engine power by over 50%! These jobs produce more air in the engine block, allowing it to burn more fuel and produce more horsepower.

Conclusion

Turbo can significantly increase engine horsepower without significantly increasing its weight, which is a great benefit that makes turbo so popular. The advantage of compressing air is that the engine compresses more air into the cylinder and more air adds fuel. Improving the engine power is very essential to our cars, which increases the car’s lifespan more.
[img]https://4.bp..com/-pJg-kztl4Yc/XDU46j5JUGI/AAAAAAAAB-M/PRGWqRoFNF8yNOpxNcf1sD6H-OI3lOE-gCLcBGAs/s320/boosted%2Bcar%2Bengine.jpeg[/img]

Source:
http://www.eliancars.com/2019/01/5-powerful-methods-to-improve-engine.html#more

Car accidents are caused either by the driver's own negligence or by another person who violates the vehicle or traffic regulations. In both cases, a person driving a car suffers from multiple injuries and prevents an accident.
Undoubtedly, the car has plenty of safety equipment, such as seat belts, which reduces the risk of serious injury. However, many car accidents can be prevented by observing and taking intelligent action on time.

The most common car accident injuries you need to know

While the injuries in each car accident are different, doctors have observed certain frequent injuries in each car accident. Some of the most common preventable injuries are listed here, which, if taken into account, can save a number of injuries
during the car accident.

1. Head and brain injuries

This type of damage is mainly due to a serious car accident. In such cases, the person suffers from headache, concussion or traumatic brain damage. Thus, the loss of memory or consciousness of a person over a longer period of time; leads to coma in severe cases.
Usually during this type of damage, the car airbags protect the person from the front and side effects. Sometimes, however, these safety bags can cause minor damage, but according to experts, the intensity of the damage is much lower.

2. Psychological injuries

In addition to physical damage, the victim sometimes suffers from certain mental illnesses. These may include painkillers, depression, traumatic stress disorders, or nightmares. In addition, these types of injuries occur mainly in the event of severe burning or shock during an accident.
It is therefore necessary to provide compensation to these patients in addition to physical damage on the basis of mental injury.

3. Facial injury

During an accident, a person usually suffers from fracture or other car accident damage in the face / mouth area of the teeth or jaw line. These personal injuries are mainly caused by a person's face colliding with strong objects such as a car window or steering wheel. Therefore, if a person covers his face and head with his hand in the event of an accident. It can certainly save him from any serious face.

4. Foot, knee and foot injury

Combining legs and feet can save you a serious break or injury during an accident. Therefore, do not feel embarrassed and follow what can prevent damage to the lower body parts.

5. Back injuries

Back injury is common if you feel a sudden jerk or stress in a car accident. It can lead to serious injuries, such as a sliding plate, fracture or sometimes, a slight injury, such as a sprain back. Thus, in order to avoid such damage, there is only one direction outward, the seat belt. As with this safety feature, you can limit yourself to moving during a car crash. After this drive, it can certainly save you from back injuries that you can't otherwise fix permanently.
So, once you know the tips for some commonly preventable car accidents, you can now intelligently and easily prevent yourself from serious injuries in a car accident.

Source:
http://www.eliancars.com/2019/01/5-most-common-preventive-car-accident.html#more
[img]https://2.bp..com/-PjYv7sAvg3Q/XDPlwHOVD2I/AAAAAAAAB-A/Zude000aLqgI7iW3l2unY_KBsa--rv0IQCLcBGAs/s320/Accident%2Binjuries.jpeg[/img]

Are you planning to bring your family and friends on the road in the summer? Organizing the trip is important but also preparing your car for the long journey is essential. Summer is a season that brings torrid heat and sometimes your car could cope with the weight of these rising temperatures. The challenges that summers represent in your car can be controlled by following some tips and tricks. Read on to find out how you can prepare your car for the summer and fight the heat like a pro.

Prepare your car for the summer - 4 important tips to overcome the heat

Summers are characterized by heat, dust and dryness. The combination of these factors can outweigh the vehicles and make your driving experience worse. Nobody wants their car to break in the middle of the road on a hot summer day. For the same reason,
the following suggestions have been suggested so that your car can survive well in the heat.

1. Check the car's air conditioning systems

Air conditioners provide relief and coldness on a hot day. And when driving on the road, the solid performance of your car's air conditioner can certainly be affected. But you need to know that just like your home AC, car air conditioners need periodic maintenance.
Get an expert mechanic in your car to check if there are belt problems, compressor problems, or even coolant leaks. Whether it is repair or replacement, do not hesitate to spend some money because the return on your investment would be varied.

2. Check the coolant levels

Coolant is an antifreeze material that helps the car to keep it cool in the summer. Thus, checking the coolant levels is essential to prepare the car for the summer. May be a coolant leak or be filled with impurities. Anyway, you need to get the coolant quality and coolant levels back on track. Send your car for inspection to detect possible coolant leaks and possible causes.

3. Never skip windscreen wipers

Summers, though hot, can sometimes bring wells that provide the necessary relief from the sparkling sun. However, a shower under the sky does not work well for smooth driving experiences. That is why repairing windscreen wipers is essential.
Let the mechanic check for broken, faulty or noisy windshields. Get them to replace what the expert has to suggest. But never leave it to the later thinking that it is a minor issue.

4. Have the brakes and brake oil checked

The fading of the brakes has caused accidents and was too often in the summer. This may be due to the fact that summers deserve your car in a network of burning heat. If you notice delays in breaks, noise or pulses, please send your car for review.

The right professional would change the brake oil, work with loose brakes and repair the brake pads and brake discs for your smooth journeys on the road. Browsing the driving instructions can help you feel a lot about why braking repairs are important.

Conclusion

Although the summers are hot, they bring holidays, trips and fun. So when planning your road traffic, prepare your car in the summer by following the tips and suggestions. This small step would lead to smooth and carefree trips. Don't forget to store cars with water bottles, flashlights, and first aid boxes as additional guidance

Source:
http://www.eliancars.com/2019/01/tips-and-suggestions-to-prepare-your.html#more
[img]https://3.bp..com/-eSCfGbNNhhs/XDMalpW46-I/AAAAAAAAB90/Qnm1N62hqBINp5PSiETRT8cW9uwOkOUDgCLcBGAs/s320/summer%2Bcar.jpeg[/img]

Undoubtedly, leasing a car is a cost-effective way to find out the taste of any other car brand. Be it in terms of comfort, features, safety or performance; Leasing gives you the opportunity to enjoy the ride of a new car. If you choose to rent a vehicle instead of buying it, chances are you'd rather drive new cars, but for a certain period of time. But do you know that many people do not know what mistakes they make when leasing? When you enter the world of leasing, remember, many scams are already waiting for you. So you have to be careful enough to deal with them.

To avoid car leasing errors now - the list

Smart always wins! The same applies to the lease of a car. While some people already know this market, others are still wondering how to rent a car without any problems. But as they say, "It's never too late," why do we miss the chance to understand what mistakes you
can make. So, if you're in the world of leasing, make sure you do not make those mistakes.

1. Regardless of maintenance

Is it better not to pay attention to maintaining and acquiring knowledge in the field than to pay for a car? It's a great idea to keep it as you use it. The company does not pay attention to small scratches in general, but if the loss is greater, it is likely that you will be charged. For example, changing tires on a rented car or by experts can always help. So pay attention to the initial maintenance and small mistakes when licking a car before paying more money when returning the vehicle.

2. Know more about credit score

Do not Know What Your Credit Score Is? It's time to check it out before you finally go to rent a car. There are certainly hundreds of mistakes that need to be avoided when you rent a car, but this is worth watching. Lease costs depend on your credit rating. So it's better to know about your credit score before leaving the car rental.

3. Let it go on time

Why would not someone choose other options if the car is bought on the lease? Everyone who has rented a car must know when the right time is for it to go. If you keep it for years, it will cost you more money. This is perhaps such a mistake that most people do when choosing car leasing. Experts say that they have to upgrade to the new car immediately after a period of three to four years. If you do this, these extra problems will not let you fall on your head. This can be all repair costs and the money that is used for other problems that someone has to pay when returning the car.

4. Looking forward to Gap insurance

You know that the car begins to lose its value after you've driven enough. There is also no exception to leased cars. If you have leased a car, it would be great to have insurance taken out. If not, you will probably have to pay the price later from your pocket. Gap refers to the actual difference in the way insurance companies value your car plus what you are still required on your lease contract. Do you think what if your vehicle is stolen? In that case, the insurance company pays the estimated value of the vehicle. The amount that is still awaiting the lease will certainly not be added to their sum.

5. Do not violate the lease

Leasing is allegedly a long-term contract between the car owner and the leasing company. If you violate the rules in any way or end them before the time specified in the lease, you may be responsible for one of the biggest mistakes in car leasing. The whole thing can be quite expensive for you. So read the lease carefully before you complete everything. To ensure this, the conditions and provisions for the entire vehicle rental are complied with accordingly. Always read the printout before proceeding to sign the contract.

The crucial

This car's leasing mistakes might seem small, but it's not as easy and small as it sounds. But if you know these errors in advance, it would probably be much easier to avoid these mistakes. All you have to do is read these points carefully and also analyze your situation. So, keep reading and be ready to lease your car without any problem.

Source:
http://www.eliancars.com/2019/01/5-car-leasing-errors-to-avoid-now.html#more
[img]https://2.bp..com/-RJUUNGKxXb4/XDGMsVRw8tI/AAAAAAAAB9o/_bDTvTo16RUgtyXQS8C4wjxaTPN0GutkgCLcBGAs/s320/car%2Brenting.jpg[/img]

Congratulations

Have you ever seen wipers stop working or move out of sync while driving? This is due to some underlying bugs that restrict the normal functioning of windscreen wipers.
Your windscreen wipers will help you get a clear view of the road ahead, but suddenly the windshield wipers will pause. A catastrophic situation, right? The windscreen wipers are essential for safe driving. If windshield wipers do not work, you need to look for the cause of the problem to avoid bad consequences.

What are these mistakes? Let us find out!

1. The faulty wiper control

If you feel the need to clean the windshield, turn on the wipers normally with a common regulator. This is the same controller that controls the operation of turn signals, high beam and even headlights. If the wipers do not work, there may be a problem with the control connector.
This problem is the easiest to recognize! If the
controller is faulty, the turn signals or headlights also no longer work. To fix the problem, you would need to see a mechanic who would address the problem effectively. This is one of the reasons why the wipers do not work. Let's look at other possibilities.

2. Torn wiper blades

You must be aware that the condition of your wiper blades determines how well your wipers work. In short, if the rubber edges of the wiper blade are torn over time or due to an accident, problems arise. This is because the wiper blade cannot make effective contact with the windshield.
The debris or water accumulated on the glass surface would not be removed, but the windshield would be susceptible to scratches. It is strongly recommended to replace the wiper blades to prevent later major damage. Refer to the maintenance tips for the DIY process to replace the wiper blades.

3. The blown fuse

Sometimes a pressure develops in the windshield motor. This in turn causes the fuse to blow. In such a case, the motor limits the power transmission to the wipers, resulting in their malfunction. The symptoms of such a scenario are dead windshield wipers that do not move or sound at startup.
If the fuse blows, check that the wiper blades are blocked. As the weather affects the wiper blades or if objects get tangled with them, this can lead to the fuse blowing through. If windshield wipers are not working properly, you should consult a specialist and have it replaced as soon as possible.

4. The ruthless winter

If you happen to live in places with extreme winters, your car wipes are likely to suffer, also this may not be good for the windshield wipers.
To avoid such circumstances, you can rely on sturdy and weather-resistant blades such as the Premium Winter Wiper Blades. These are proven blades that withstand the demands of the time and withstand frosty weather.

Summary

These are the four reasons why windshield wipers do not work. Be it a mechanical fault, an electrical fault or even a hardware fault, never ignore the need to visit a mechanic. This is a kind of precaution that you take for your safety.

Source:
http://www.eliancars.com/2019/01/why-do-windshield-wipers-not-work-find.html#more
[img]https://4.bp..com/-fvkX6R5Gi2s/XDAIeWWqZvI/AAAAAAAAB9c/nRU9MIpdRFcbZifZiufpiTPnz6LX6ccUQCLcBGAs/s320/windscreen%2Bwiper.jpeg[/img]

Taking the family from those long and quiet trips or perhaps to the nearby shopping center may sound incredible. But between what gets dirty with time is the vehicle. No matter how long or short the trip, the car will always be full of things that can dirty the interior of the car than the last trip. So, what is the solution to this? Of course, everyone should understand that keeping the interior of the car clean is a necessity. But the question is exactly how! How can the interior of the vehicle be kept clean and fresh?
Well, here are the perfect things you should follow to keep the cleanliness inside your car.

1. Do not let the spots stay there

Clean dirty marks or stains on the car as soon as you see it. Greasy oil or oily stain can remain there forever, if not cleaned. Why not take a
soft cloth and wipe the stains right there to make sure the car does not smell or look bad? Even children often color the windows with crayons or ballpoint pen ink, which can leave permanent marks inside the car. Why not clean it with a mixture of water and baking soda to remove stains quickly? In summary, you should not let those marks remain in the car in any situation. Keeping the inside of the car clean is important.

2. Dismiss the garbage

One of the biggest mistakes that all car owners make is to leave garbage or empty cans in the vehicle. This can lead to car clutter, which makes it bad and impure. Empty the trash bin by moving all the loose bins in the car. To do this, you can use your protective gloves to avoid hand cuts. Start on the floor and then move on the road. Always check the seat pockets, under the seat, the seats, seat belts and any areas you think are dirty.

3. Exact vacuuming is the key

The facts say that when you travel by car you will have to bear most of the debris and dirt. It will happen no matter what. The key to getting rid of dirt and dust is thoroughly cleaning the car. Regardless of how busy your schedule is, take some time to vacuum the car. And it should not be just cleaning, it must be to wipe away every piece of dust and dirt that is in the car. Even cracks and small nooks must be checked. What you can do to clean it thoroughly is to remove the seat covers and even mats to ensure that everything is properly cleaned. Use a thick brush for the mat and seat covers, but choose a soft brush for cleaning windows and doors. Use the best car vacuum cleaner to clean it properly.

4. Never smoke in the car

This particular activity was detrimental to your health and even to your vehicle. In case you smoke inside the vehicle, the smell will remain there for a long time. Certainly, it will be absorbed by various parts of the automobile and will begin to spread if it is not cleaned in time. Not only smoking, even eating inside the vehicle will make you smell bad. Regardless of whether you are on a shorter or longer trip, it is always recommended to avoid smoking or eating in the vehicle, in addition to following certain basic maintenance instructions, to avoid other strange smells.

To summarize
It is therefore recommended to pay attention when eating or drinking inside the car. It is easy to keep the car interiors clean if you take these points into account while traveling, eating and drinking inside the vehicle. So stay clean and keep your vehicle clean too.
Happy New Year!!!!!!!!!
[img]https://2.bp..com/-RROJev5Ps-4/XC7bF945snI/AAAAAAAAB9Q/wZXLVMFdOTcicg984tH1_j9vmmngpUmdwCLcBGAs/s320/Car%2Bcleaning.jpg[/img]

Source:
http://www.eliancars.com/2019/01/tips-to-keep-interior-of-car-clean-and.html#more

Educative

Humans need water for their bodies, and for the car, fuel is just as important for it to work. When you run out of energy, you not only destroy your driving pleasure, but also damage car parts in the most horrible way. When vital parts of your vehicle is heavily damaged, it only takes a skillful mechanic to place it back to its original state. It’s advisable not to run out of fuel, because it’s very dangerous. For this reason, vehicle owners should better understand the consequences of an empty fuel.

List of damaged car parts when the fuel runs out
Many drivers forget or are too lazy to fuel their cars before they run empty. You may think that it is not too serious, but this habit is proven to reduce the age of the engine and destroy many parts of your vehicle.

Which car parts are damaged the most?

Fuel tank
Understanding the tank capacity is necessary. When trying to drive almost without gasoline, the tank is definitely badly damaged. But the drivers did not know that the gas crust is also used for energy, instead of having to stay in the filter. If the vehicle runs out of fuel on a regular basis, the crust on the fuel tank, the engine and other parts of the car will adhere and slowly corrode.
Since the energy tank is made of metal, it pulls and collects the gas crust, which leads to corrosion and damages the vehicle. This is a serious problem and happens with many old cars

Fuel injection system
The theory is that fuel injection will transport fuel from the fuel tank to the burning tank. This is the reason why fuel injection is the most important part of the pumping system. Driving with an empty fuel tank, however, not only has a direct impact on the injection, but also on the filter system, since the crust in the fuel tank is also absorbed in the injection.

In fact, the gas crust remains stuck in the filter. Later, even after pumping, the gas still could not reach the burning tank. In this situation, drivers will not start their cars.

Electric motor
Drivers usually ignore this, but if their car runs out of fuel, they also damage the electric motor. In the normal state, an electric motor uses fuel as the cooling fluid. This method cools the entire system, from the motor to copper wires.

When the gas runs out, however, the engine overheats and breaks down.

Conclusion
It is absolutely forbidden to drive if the energy level is too low. If your car is out of fuel, drivers should immediately provide it in a different way than driving. You may not want to pay extra for the repair of the energy filter or the fuel injection system prior to the vehicle maintenance plan. To become a good driver, concentrate and top up on the fuel gauge displayed on the instrument panel before the fuel level reaches the letter E.
[img]https://3.bp..com/-lp_-UHDMGcs/XC1Sw2-r5sI/AAAAAAAAB9E/WSqVJMEZzj0po0MZAOatbqkjdycWzztJgCLcBGAs/s320/Engine%2Bcar.jpeg[/img]

Source:
http://www.eliancars.com/2019/01/parts-that-are-mostly-damaged-when-cars.html#more

Some questions arise in the mind when a car shakes or vibrates. For example, where do sounds or vibrations come from? Is the steering wheel, brake pedal or other part of the vehicle not working properly? If the brake pedal shakes, this may be a serious problem that just makes your vehicle unsafe. There are many reasons for the brake pedal vibration. The only solution is to bring the vehicle immediately to the nearest gas station to avoid further damage.


Brake pedal vibration: causes and How to rectify it

When pressure is applied to the brake pedal with optimum force by the foot, the system automatically attempts to stop / slow the vehicle. There is a pleasantly firm feeling while the pressure is applied. However, sometimes the vibration in the brake pedal occurs when this pedal is released.

This movement in the brake varies from mild shaking to severe shuddering, depending on the severity of the condition. To your relief, here are some causes that can help you to find the main reasons for the question "Brake pedal vibrates when braking".
If the brake maintenance tips are followed, these issues can be kept in check.


1. Problem of brake pads
Each caliper of the wheel has two brake pads, with the friction surface of these pads facing the rotor. Then, when the brakes are applied hydraulically (in simple words, the brakes are put into operation with liquid oil), then the caliper tightens the brake pads together on the rotating rotor to stop the vehicle.

However, if the pads are contaminated with oil, dirt or other substance, then the brake pedal vibrates during the clamping of the pads in the rotor. In addition to this, wrapped, damaged or excessively worn pads can also be one of the causes of the vibration of the brake pedal.

How to correct it: You must disassemble the brake and then clean it to remove all dust, rust and other contaminants. Getting rid of dirty things allows the car's brake to work more smoothly. In case you cannot help, however, your last option is to replace your pads.


2. Brake disc (Rotor)
The rotor part of the brake system is important. Therefore, it is critical for the overall safety of the vehicle to be properly maintained. This rotating part of the one-wheel disc brake assembly works against the brake pads. Typically iron gray (a form of cast iron), the rotor works to decelerate / stop the vehicle.

It is hooked to the hub of the wheel, so this rotor rotates in the direction of the wheel. When the brake is applied, the rotating rotor reduces the speed of the vehicle using the friction of the direct contact with the pads. Therefore, poor rotor condition can cause the brake pedal to vibrate when stopped.
However, if this part of the system is marked, cracked, deformed or excessively oxidized, it can cause an uneven grip of the brakes, which can also produce squealing or pulsating sounds, when the brakes are applied.

How to correct it: brake rotors need to be repaired or replaced. Replacing or resurfacing both rotors (front or rear assembly), even if only one of them is in poor condition, is crucial. New brake pads are highly recommended when replacing rotors because the worn surfaces of the pads will not make contact with new and smooth rotors. It takes time for the surfaces of both sides to line up correctly, if not replaced in unison.


3. Incorrect alignment of the wheel
The aligned tires of the vehicle obey perfectly the steering wheel. On the contrary, when there is a disorganization of the tires, they tend to produce screeching sounds. This unpleasant sound or vibration is caused by the rubbing of the wheels against the brake pads, when the vehicle is decelerated. Therefore, it must be treated at an early stage before the braking system malfunctions.

How to correct it:For balance problems, an indispensable process is the alignment of the wheels. The application of an inspection will show what type of alignment you need, a two- or four-wheel alignment. Commonly, a 4-wheel alignment is applied to SUVs, while cars only need an alignment on the 2 front wheels. In case your rear axle is damaged, or the car's own chassis, it is crucial to carry out a four-wheel alignment.


4. Wear components
Once the brake pads become thin or there are scars or cracks in the face of the rotor, taking the vehicle to the nearest service station would help solve the problem of the vibratory pedal. In addition to these mentioned causes of brake pedal vibration, worn ball joints, tie rods, wheel bearings and other parts of the system can also cause brake problems.

How to fix it: this problem is the most difficult to solve because it takes time and many inspections to diagnose exactly worn components. If you do not know much about the engine or the car, it is strongly recommended that you inspect the car's suspension to find out the cause of the brake pedal's vibration.
[img]https://4.bp..com/-2rDRGmkVzfo/XCwyeNLXACI/AAAAAAAAB84/_8OJBQu3y5AJ-KoCeDJrmy0UBXdpxNcBQCLcBGAs/s320/brake%2Bpedals.jpg[/img]

Source:
http://www.eliancars.com/2019/01/4-common-causes-of-brake-pedal.html

An essential element that a car deserves is fuel economy. If the car consumes less fuel and is too effective, it is considered great. On the other hand, there are times when the driver complains about unusually high fuel consumption. Have you ever thought about the reason for the high fuel consumption? If not, let us burst the bubble and know where the problem might be.

1. The defective engine block

First, you should look at the "engine". This block could be adjusted inappropriately, or if you skip
an outstanding service, fuel consumption can suffer. Speaking of gasoline engines, when the replacement of worn spark plugs, air filters or fuel filters is neglected; the fuel consumption would rise.
If the engine happened to be a diesel engine and the injectors or air filters were clogged, fuel consumption would increase exponentially. The two components are essential elements that contribute to the combustion of the fuel, and if they clog, a high fuel consumption would be observed.

2. If you create the wrong gears

If you own a manual transmission car, there is a possibility that you are consuming excessive fuel. This occurs more if you are an amateur rider. Suppose you have engaged the 2nd gear and drive at a speed of 50 km / h. This in turn would require more power to take a step, and thus more fuel economy.
In simple words, if you drive in a smaller gear and the speed requirement is higher, the fuel would be consumed excessively. The key to reducing fuel consumption is synchronizing the speed with gear changes and accelerating to a limit.

3. Driving with the AC "ON"

If you have the habit of driving "ON" with the AC, fuel consumption will increase. Check how often you use the vehicle's air conditioning system. The alternating current is known to increase the load on the engine, which is the reason for a high fuel consumption. The same applies to a car heater! Read the maintenance tips to learn more about the heater and fuel economy concept.
Sometimes the use of AC for fuel consumption can be better. This is when you drive at a speed of 80 km / h or more because the open windows can cause air resistance. It is a good idea to open the windows for a few minutes after driving before turning on the air conditioner. Such a step would cool the car down a bit and thus improve fuel economy.

4. More load in the trunk

Sometimes the fault is not in the mechanical block, but in the load your car carries. If you like to travel long distances, you need to have a lot of things in your car. This may sound comfortable, but it indirectly increases fuel economy. If you want to save fuel, it's best to reduce the extra weight.
You can also remove the roof luggage or the appropriate vehicle if you do not use it frequently. Clean your vehicle by removing unnecessary material to reduce the load to a minimum. Once you're done, you'll notice a change in fuel economy.
[img]https://3.bp..com/-B3TaPAdn3fg/XCq6pKtHCjI/AAAAAAAAB8s/C70aNBRZmAwjxWYFz_MEkSJ5kUTs2GMYgCLcBGAs/s320/car%2Brefilling.jpg[/img]

Source:
http://www.eliancars.com/2018/12/four-common-causes-of-high-fuel.html#more

1) Check the junction

Before you drive through an intersection, it is obvious that you make sure the area is safe. Always approach the intersections that await other traffic and pedestrians.
Our first trick in driving safely at intersections is to look in both directions before entering the intersection. Pay close attention to pedestrians and actively look for them when you turn.

2) Concentrate and pay attention

Concentrate when you are in the interaction. Avoid distractions such as loud music, conversation or the use of mobile phones for social media. Keep your hands on the wheel and brake when needed. In the interaction for a small error, a collision occurs at any time. So make sure you pay close attention
to the drivers in your area.

3) Turn around wisely

Look at both ways to see where other vehicles are and what their intentions are at the intersection. Make later a point of reference that helps you to keep the vehicle in the middle of the road.
A smart turn is another trick for safe driving at intersections. Keep track of your reference points while driving and turning. Move the vehicle safely without hitting anything, especially the rear part.

4) Speed limit

Fast cornering at intersections is an important factor in safe driving at intersections. When cornering, always drive safely and slowly up to 5 km / h. This improves your reaction time and distance to stoppage. This allows you to increase the safety margin to avoid a mishap.

5) Keep security near the stop light

As we suggested, the driver should not continue while the signal light is green. The road is a dangerous place, so it is important to look in both directions first to identify another vehicle.
Look forward to traffic and wait until there is room for your car on the other side of the intersection. Always remember to stop and never pass a red light. No one wants to risk their lives just to save a few seconds, that's for sure.
When you are turning at a red light, first make sure there are no restrictions. It is not only one of the safe driving tips at intersections, but also to protect your own ticket wallet. Then, check all vehicles, pedestrians and cyclists on both sides, including oncoming traffic. When the arrow indicates turning to the left, continue. If it is not legal to cross an arrow at the intersection, then consider incoming traffic before taking your turn.

6) Proceed to the intersection

First, do not enter an intersection when traffic is backed up on both sides. The driver should wait for it to clear to cross the intersection.
Second, you should not change lanes in the middle of an intersection. This is dangerous and totally illegal, so wait at the intersection until you have passed to change lanes.
Third, pay close attention to the intersection in case of sudden stop of any vehicle. This is true in all situations because you will never know what could happen on the road.
Last, always be aware of the activities of other drivers to avoid hazards.

Conclusion

If everyone understands and follows the safe driving tips at intersections, the collision rate will surely decrease. In addition to complying with the rules, the driver's label is the first step in improving intersection safety.
[img]https://1.bp..com/-GkmgDsWlOU4/XClYwC9RHAI/AAAAAAAAB8c/YyCd1o4qGegYFOip11entSd0Ih41k4IggCLcBGAs/s320/car%2Bintersection.jpeg[/img]

Source:
http://www.eliancars.com/2018/12/6-tips-for-safe-driving-at-junctions.html#more

The car fire is by far one of the most terrifying experiences with car owners. It is obvious that no one wants to see his beloved four-wheeled vehicle catch fire. Yet, many people do not know how and why this incident occurred. For this reason, we will list the 6 most common causes of car fire.

1) Bad maintenance

Of course, the most common causes of car fire are human errors. Many people think that lounging is not such a big problem. However, if your vehicle owner delays the maintenance schedule, you will unknowingly increase the risk of a vehicle fire.
Without maintenance, you will not be able to detect
and repair broken parts, gaskets and cables. Your vehicle is slowly getting into the fire. For example, a faulty seal in the engine drips liquids that are amazingly flammable. To prevent this, take your car to the car dealer immediately.

2) Accident

Even if it depends on the impact, a car accident can cause an explosion and even be considered as one of the causes of car fire. Many people think that cars are designed to protect the interior very well. However, sheet metal is not really a barrier, so a hard blow can actually cause leaks and fluid leaks. And it's the perfect condition to light a fire.
In addition, we cannot see the damage done to a car in a crushed vehicle to find out if they will cause a fire

3) Fuel system leaking

We are now discussing one of the most common causes of vehicle fires: fuel leaks in the system. There are many factors that can cause a fuel leak, which makes it very dangerous. Car fluids have flammable and toxic properties, but are in no way exposed to the risk of gasoline. Gasoline can ignite at a simple spark or at a temperature of 45 degrees.
We recommend that you ensure that your vehicle is properly maintained and always check the leak before deployment or not. We recommend moving away from the accident as soon as possible.

4) Failure of the electrical system

Like many car owners, we know that car batteries are problematic. In fact, failures of electrical systems are so annoying that they take second place on the list of common causes of vehicle fires. Failure of the electrical system can create sparks, ignite leaking vapors, or cause liquid waste. As the wiring of doors, canals to seats or carpets runs, a fire can be triggered at any point in your vehicle, if something is wrong in the system.
Once again, take your car to the car mechanics to check the schedule to avoid the electrical system problem.

5) Batteries for electric vehicles

Electric vehicle batteries were the problem of auto mechanics long ago. Even with the world's safest car, automakers still have to run many tests on vehicles that catch fire during the crash. For most of these problems, escaping coolant is one of the major causes of vehicle fires. It interacts with the damaged batteries that produce sparks and flames.
This problem is annoying because with each new design there are always new potential risks.

6) Overheated engine

We come to one of the most common causes of car fire: overheated engine. An overheated engine causing a fire on your car may seem impossible, but it actually results in many incidents.
The heat from the engine will cause the oil and coolant to rise and could escape from the traffic areas. And when that happens, the internal liquids drip into the exhaust system, the engine compartment and many other hot parts of the car. And as you all know, they spread and catch on easily.
[img]https://1.bp..com/-Jd7sCs9CnL0/XClUGfSTssI/AAAAAAAAB8Q/P5h0oLUP-DkRzyNU-jiZE7_jGCI_8U6gQCLcBGAs/s320/car%2Bfire.jpeg[/img]

Source:
http://www.eliancars.com/2018/12/the-6-main-causes-of-car-fire.html#more

Whining noises when accelerating are annoying. Every time you start the vehicle, you are startled because the noise could disturb your neighbors. Why is this happening and how can you get rid of this embarrassing problem? With frequent use over time, many vehicle components wear off and show problems. It is not something that can prevent you, but it is possible to diagnose the cause and find a solution before it gets worse. Well, here's how to handle a loud car:

1. Inspect the transmission

You should do a thorough transmission check if the car makes a groaning noise when accelerating. This can happen due to a low gear oil level or worn gears. Low fluid levels can cause all kinds of problems, and bizarre noises are the first things you
can do with them. Recognizing this problem and replenishing the fluid can save you a lot of money on the road.
If the noise starts only when the vehicle is in motion, there must be problems with one or more gears and bearings. Planetary gear sets produce a wailing sound when worn, but only when the car starts to move. Repair or replace the transmission components if they are damaged.

2. Defective steering

A loose steering belt could be the cause of a whining noise when accelerating. If it happens, the sound will sound as you turn the steering wheels. Tightening the belt solves this problem.

3. The power steering system

A leak in the power steering system can lead to disturbing noises. If you notice that your car is dripping or there is a visible drop in power steering fluid, there must be a leak. Look in the rack or gear, as this is probably where the leak is likely to be in the pump.
You can replace the damaged or spilled parts and refill the fluid to correct the problem. The simple solution is to add a liquid stop leak solution to the reservoir. There are many high quality products on the market that offer a simple, fast and cost effective solution, rather than replacing components. After filling the stop-leak mixture, top up the power steering fluid reservoir.

4. Problems with the engine

The rising noise in the car can also indicate an engine problem. The engine has a complicated mechanism and it is better to call a mechanic for a diagnosis. However, you should do this only when you are sure that the problem is with the engine, not with the transmission.
Shift the gear to neutral and carefully crank the engine. If the noise appears to be related to engine speed, the engine will struggle. If you do not hear a sound when the vehicle is not in the vehicle, the engine is unlikely to be the cause of the complication.

5. The clutch components

When you drive a manual car, a whining sound is a completely different story. If this occurs when the clutch is pressed to shift, the release bearing is likely to be damaged. It will be a pilot camp when the noise starts, when the car starts to move and you release the clutch. In both cases, changing the clutch is the only solution.
A manual transmission engages only when the vehicle starts to run or when the gear is idling with the clutch engaged. So it's probably a clutch problem when the vehicle is not in a gear. You should check the transmission, especially the power-train or the bearing, if the noise occurs while driving.

6. The torque converter

The automatic cars as an alternative to the clutch are the torque converter. It rotates when the engine is running. If the noisy sound appears when you shift the gear to the reverse or forward and it disappears after moving to neutral mode, the torque converter must be in trouble.

7. Reduced engine oil

The first thing to inspect after a noisy sound during acceleration is motor oil. Low level of oil is the major cause of this problem. The motor oil is found near the brake fluid tank. You can use the oil level gauge to determine this.
The dipstick has to two labels - "add" and "full". It’s important to refill the tank any time its low. Early inspection will prevent the car's engine from serious damage.
[img]https://4.bp..com/-CNXCjQABoTs/XChfdaxi8FI/AAAAAAAAB8E/rY7VJoAe2vETXgjGm2Oh8CyVqrOgnHgrQCLcBGAs/s320/Accelerating%2Bcar.jpeg[/img]

Source:
http://www.eliancars.com/2018/12/7-components-to-check-if-car-makes.html#more

How potholes form

Potholes are road imperfections that occur when the ground which is compacted under the road, is weakened or displaced. In winter and spring months, roads are particularly likely to make potholes when ice and lots of running water destroy the ground layers below the pavement. As cars drive over these vulnerabilities, the pavement, cracks, and spalling deforms to leave a hole in the road surface. Potholes start small, but grow with increasing traffic and may become deep or big enough to damage a car.

What to check if you hit a pothole

If you drive through a pothole, check these five areas to make sure you have not caused a problem that needs to be fixed:

1. Tires:

The tires are the only part of your car that touches the road, so it is not a surprise that they are susceptible to damage from potholes, such as bulges in the side walls, separation of the tread or floors. This can happen because bumps often have a hard edge that compresses the tire against the wheel at the moment of impact, cutting the rubber or breaking the straps that hold a tire. Driving with a broken tire is not safe, but you may be able to repair it. However, a tire with a side bubble or a separate tread should be replaced immediately. Cars with low profile tires are particularly prone to damage from potholes. Make sure your tires are always properly inflated to help prevent these types of problems.

2. Wheels:

Scraping your tires never looks good, but even the worst rash on the curb cannot damage a wheel like a bump does. The hard angles in the potholes apply impact force to the wheels in ways that were not designed to handle, leading to curves, splinters or cracks. A bent wheel does not turn smoothly and may not be able to form a tight seal with a tire. The chips are usually easy to notice since they look like a missing piece on the tire where the tire is located. However, cracks can be subtle fractures of the hairline along the circumference of the wheel or on one of the spokes. Brake dust and dirt from the road can make cracks difficult to detect, so clean the wheels thoroughly and perform an inspection to check. Bent wheels can sometimes be repaired, but splintered or cracked wheels can fail catastrophically and must be replaced completely.

3. Suspension:

The car's suspension is designed to absorb impacts and provide a smooth ride, but there is a limit to how much you can handle. Sudden bumps against potholes can cause a variety of suspension problems, including misalignment, broken ball joints and damaged struts. The suspension bent out of alignment can usually be put in place by a qualified mechanic, but until it is fixed, you may notice that the steering wheel is not centered, that your car is moving in one direction, that the steering is loosened and that the tires wear unevenly. Unusual vibrations and sounds, errant steering, poor handling quality or tilting of the vehicle to one side may indicate broken ball joints, struts or shock absorbers, which generally must be replaced completely. It can be difficult to correctly diagnose suspension damage, so it is best for an experienced mechanic to inspect the entire system if you notice any of these symptoms.

4. Exhaust:

Since the exhaust pipes run along the undercarriage of a car, they are a perfect target for the bumps that lurk on the road. Deep potholes can cause a car to hit bottom and scrape the undercarriage against the pavement, which could dent or tear a hole in the exhaust pipes, muffler or catalytic converter. You may experience a loss of energy or unpleasant noises if there is a hole in your exhaust system, but perhaps worse is the fact that your car will throw harmful pollution out of control. In addition, a leaky pipeline can allow the exhaust gases to enter the cabin, posing a potentially serious health hazard.

5. Body:

In general terms, the lower the car is to the ground, the better it is handled, but the cars that sacrifice steering height in search of sportsmanship are more likely to be damaged by potholes. In addition to the problems listed above, bumps can scrape bumpers or side skirts. While this type of damage is usually cosmetic and does not affect safety or performance, it is still something that drivers who care about the appearance of their car want to avoid. If you drive a low and sporty car, use your sharp handling to maneuver safely around the potholes you see.
[img]https://1.bp..com/-R8qe9nHcOYk/XCbgbliiDTI/AAAAAAAAB74/-c8cPhcPKlsVFsGjQGlxQbt2Qd4-Glg4gCLcBGAs/s320/Pothole%2Bcar.jpg[/img]

Source:
http://www.eliancars.com/2018/12/5-auto-parts-potholes-can-destroy.html#more

Any change in the color of the smoke, such as white smoke from the exhaust, is certainly a sign that there is a problem with your car. The severity may vary depending on the type of smoke. The problem can be caused by accumulation of condensation and may not have any obvious effects.
But the drivers need to understand what white smoke means.
White smoke is the problem when your car emits white smoke from the exhaust pipe. White smoke may or may not be a big problem depending on the thickness. The white smoke is the result of normal condensation forming in the exhaust system. So, if it's as thin as steam, there's nothing to worry about, as it will disappear quickly. On the other hand, thick smoke is a big topic.
Thick smoke usually comes from the defective engine coolant, which can lead to many serious problems, such as: Damaged cylinder head, blown head gasket, cracked engine block ... which can cost the car owner a lot. In this situation, we recommend not to ignore it. A coolant leak, even if it is small, can lead to serious damage to your vehicles.

WHAT YOUR CAR IS TRYING TO TELL YOU THROUGH WHITE SMOKE FROM EXHAUST:

1) Defective fuel pump injection
Is your car running on diesel? If the answer is positive and there is a lot of white smoke leaking when starting the engine, it means that the injection
timing of the fuel pump is no longer working.
Checking or modifying the injection is not a recommendation from us, as this task requires a lot of skills that beginners should not try. Instead, have your car checked by a mechanic without wasting time.

2) Leaky coolant
Another problem with white smoke is the leaking coolant. The display is recognizable if white smoke appears when the vehicle is running, but not when it starts up.

The reason for this type of white smoke is due to burning coolant that has somehow gotten mixed up. If your vehicle has no coolant, the car may heat up and emit white smoke. For this reason, it is also very important to understand the temperature of the car. Do not drive if the coolant runs out, as this can lead to dangerous situations

3) Problems from other parts
Often, heavy exhaustion of white smoke when the car is running can be an indication of expensive and complicated problems. If the cylinder head, cylinder head gasket and fuel filter are damaged or the engine is clogged or cracked, white gas will leak out in large quantities. Attaching or replacing these parts can be expensive.

HOW TO SOLVE WHITE SMOKE FROM THE EXHAUST PROBLEM :

1) Check the inlet seal
There is a gasket in the vehicle, which seals the distributor at the head. These parts take on the task of distributing the combustion mixture together with the coolant to the separate inlet opening. These connections are placed in the cylinder heads. You need to understand this now: if it gets damaged, the coolant will get into the port and combustion chamber, producing white smoke while driving.
To remedy the problem, the driver must remove the intake manifold and inspect the inlet seal. If there is a leak or rust, you know where to repair.

2) Examine further to check the head gasket
Remember to perform this step only if the inlet seal is working properly. Then we come to the cylinder head gasket.
This is a part of the car that seals the cylinder head to prevent coolant from entering the cylinder. Leaks or damage in this area can cause the coolant to enter the chamber.

3) Look for a crack in the cylinder head
The cylinder head is the aluminum car part, which tends to break when overheated. This part is important because it is connected to the engine block and the head gasket.
Car owners Note: If this part is broken or damaged, you need to change it.

CONCLUSION
There is no room to overlook the issue of white smoke. Other vehicles are not only affected by white smoke, but also mean that your car is in trouble and requires extra attention. It can cause problems for you and the other drivers if you do not fix it before driving.

Source:
http://www.eliancars.com/2018/12/white-smoke-from-exhaust-main-causes.html#more
[img]https://3.bp..com/-D6A5YvZ6fuM/XCV4jrNuJlI/AAAAAAAAB7s/xGF_DmrdyuUbNQ2rN71l07To6TGGLfI6ACLcBGAs/s1600/White%2Bsmoke.jpeg[/img]

Insightful

No matter,the situation of things,it's not a reason to terminate your life.Better days ahead.

The suspension is the system of tires, springs, shock absorbers and connections that connects a vehicle to its wheels and allows a relative movement between the two. The suspension systems must be compatible with road stability / handling and handling quality, which are at odds with each other. The set-up of suspensions implies finding the right commitment.
The suspension system of our vehicle (shock absorbers or struts) is often taken for granted. However, after having supported several tons of metal, year after year, shocks will wear out and repair of the suspension will be necessary. Some people mistakenly believe that the suspension is primarily related to the proper functioning of the vehicle. As a result, these repairs are less important than other maintenance issues, such as oil changes or brakes. However, a poor suspension can significantly affect your ability to control the vehicle, especially when stopping or turning, so it is in your best interest not to ignore this part of the automatic maintenance.

How do you know that the time has come to repair the suspension? Your vehicle will usually tell you.
Here are six things to watch for:

1. Car drives roughly
Most people can recognize their
shocks or struggles as they begin to feel every bump on the road, or when every bump bounces off the vehicle body. A rough ride is an obvious sign that the suspension of your vehicle needs repair.

2. Drifting or pulling in curves
With a faulty suspension system, you often feel the vehicle "drifting" or "pulling" when turning. This essentially means that the shocks no longer keep the vehicle body stable against the centrifugal force of a curve, which increases the risk of a rollover. If you feel that turning around, it's time to get the car to a trusted mechanic.

3. Dips or "nose dives" when stopping
If the shocks are worn, you will likely feel the vehicle body jerk forwards and downwards when you press the brakes firmly. This can affect your ability to stop the car quickly (poor suspension can increase stopping time by up to 20 percent).

4. Uneven tire treads
Look at your tires. If you notice that the tread on the tire wears unevenly, or if you notice bald spots, this is often a symptom that the suspension does not hold the vehicle evenly and the tires are therefore unevenly loaded.

5. Damaged "oily" shocks
If you can look under the vehicle, look directly at the dampers or struts. If they look greasy or oily there is a good chance that they will leak and therefore not work properly. It's probably time to replace these shocks.

6. Try the bounce test.
If you suspect that your suspension is going badly (possibly due to one or more of the above symptoms), try this simple test. With the vehicle parked, push the front of the vehicle down with your full weight, "hop" a few times, and then release. Repeat the process at the rear of the vehicle. If the car swings or bounces more than 2-3 times after releasing, the suspension wears out.
[img]https://4.bp..com/-sogbtAAx1is/XCQMX0FCVKI/AAAAAAAAB7Y/-PGXHtOeI6UHq3qn-RSjR_C2hzjz9693QCLcBGAs/s320/suspension%2Bsystem.jpg[/img]

Source:
http://www.eliancars.com/2018/12/6-signs-that-your-car-needs-repair-in.html#more

Below is a list of the eight most economical cars to maintain. It will show you some brands and models that can help you save your budget and your vehicle from higher repair costs.
The technicians intervened to put this list together. And, since people who see cars settle down day after day, they know which ones are the best.

1. Chevrolet Silverado, from 2003 to 2007

With space around the engine, Silverado is easy to work with, so the job is cheaper. Technology is also simple, leading to even cheaper labor. The parts are easy to find. This is the perfect storm for
a cheap car to maintain, and is true for both the V6 and V8 models of this particular car.

2. Honda CR-V, from 1996 to 2016

Honda cars are durable and retain their value, and the CR-V is no exception. The CR-V from 1996 to 2016 had the lowest frequency of "control engine indicator" repairs among all vehicles of the same date range. Less problems, besides the expected duration of the brand, make it a breeze to add to the list.

3. Honda Civic, from 2001 to 2016

Speaking of Honda, the Civic is at the top of the list of cheap vehicles to maintain. Spare parts are not hard to find, parts are readily available when you need them and the car's design makes most repairs easy to perform.
With the progress of the model years, Honda has abandoned some parts with known replacement periods, such as toothed belts. This means that the car lasts longer, with less maintenance.

4. Honda Accord, from 2003 to 2014

Like the last Honda in the list, we cannot emphasize more than these cars are reliable. The models before the 2003 model year were made with a toothed belt. From the 2003 models onwards, the timing belt has been eliminated.
The height of Accord reliability has been in the 2011 and 2012 model years. However, the Honda name virtually guarantees that you will get reliable and efficient performance.

5. Toyota Corolla, 1998 to 2017

Toyota Corolla is one of the most-sold cars in history. Since its launch in 1966, 44.1 million Corollas have been sold. Most of them are still on their way.
As one of the most reliable cars you can buy, the popularity of Corolla and the widespread availability of parts makes it the next car to look at when looking for cheaper maintenance.

6. Toyota Camry, 2008 to 2015

Speaking of Toyota, Camry is another great option. Known for many of the same advantages as the Corolla, the four-cylinder Camry is easy to repair and thus cheaper to maintain.
Combined with the Camry reliability rankings, which was the ideal 5/5 since 2017, the Camry is a classic favorite that requires no maintenance.

7. Jeep Wrangler, 2007 to 2017

Jeep Wranglers are easy and cheap to maintain, because while the engine is modern, the powertrain and suspension are simple. The traditional division of the internal components means that labor does not last long.
Although newer models are not as spacious next to the engine as the older ones, it is still a cheap car to maintain.

8. Nissan Altima, 2008 to 2015

Nissan's 36-month / 36,000-mile limited vehicle coverage and 5-year / 60,000-mile limited power-train coverage make them competitive with other brands. The Altima is easy to maintain when problems occur.
Known for its strong engine and reliability, the Altima will stand the test of time and be cheap to repair if something goes wrong.

Source:
http://www.eliancars.com/2018/12/8-of-cheapest-cars-to-maintain.html#more
[img]https://2.bp..com/-IT_J5_e3900/XCLQrL9nSNI/AAAAAAAAB7M/aPul9IrdfVcXRPTm0jG008sYMPoZ5i_bgCLcBGAs/s320/maintaining%2Bman.jpeg[/img]

insightful

NICE ONE

The New Year is here, it is a good time to proceed with the routine maintenance of your car. Whether you spend a harsh winter, here are some things to keep an eye on while you are servicing your car, especially in the colder months.

1. Change oil

Without oil change, the engine of your car will wear much faster. The oil lubricates the engine of the car, which can be influenced by the climate in which you drive. The colder the weather, the thicker the oil of your car becomes. To prepare you, you should consult your technician about the
use of a thinner oil formula for the winter months.

2. Air filter

The air filter of your vehicle prevents unwanted contaminants from being sucked into your engine. If it does not work properly due to constipation, the mileage of your car can be reduced by as much as 14 percent. The speed of replacement of air filters varies, but can range between 30,000 and 45,000 miles.

3. Tires

All things on this checklist are vital to meet the conditions of the winter road, but having quality tires is absolutely essential. As always, you must ensure that the tire pressure of your car is good; cold weather can affect tire pressure. Maintaining the correct tire pressure ensures a longer tire life and protects against excessive wear. Worn tires are almost unusable, so make sure your tires have enough profile to transfer the cold weather.

4. Brakes

This kind goes hand in hand with maintaining your tires: your brakes are the most important safety function of your car. Worn brakes are dangerous and require a longer anticipation of stopping. Have a mechanic check the brake pads and rotors of your vehicle for wear or damage and for the necessary repairs.

5. Cooling system

Even if it is cold outside, you still need coolant because the engine of your car is getting hot! Engine coolant is just as important as the engine oil. Your radiator must be filled with at least 50/50 mix of water and antifreeze to protect against temperatures below freezing. You can have a technician perform a pressure test on your cooling system. This will let you know if you have a faulty thermostat, a cracked hose or a leaking radiator cap.

6. Wipers and liquid

Wiper blades must be replaced every six months. Depending on where you live, it may not be a bad idea to invest in your windshield in some winter knives. The windshield washer reservoir of your car must be filled with frost-proof windshield washer fluid so that the work can still be carried out in the winter.

7. Battery and electrical system

Stuck on the side of the road with an empty car battery is never an ideal situation, but it can be even worse if it is in dirty winter weather. Severe cold temperatures can reduce your car's battery power by 50 percent. Stand up again and do a quick visual inspection of the battery yourself. Make sure everything is correctly connected and pay attention to any corrosion or build-up on the terminals.

8. Outdoor lighting

This should be a good idea for when you are driving, but you need to make sure that the lights on your car work: headlights, tail lights and emergency lighting.

9. Full gas tank

To prevent the fuel lines from freezing, you must add antifreeze to your system when filling your tank. Consult a technician in case you are not sure of the limitations of your vehicle.
[img]https://2.bp..com/-htNhp5xofu8/XCGrumt8SUI/AAAAAAAAB7A/co3ri4HolooQ-bvdU4pfcopP0DhISPoNgCLcBGAs/s320/servicing%2Bcar.jpeg[/img]

Source:
http://www.eliancars.com/2018/12/tips-for-maintenance-of-car-for-new-year.html#more

Good

Truly, a successful footballer

wwoooww

Collisions in the rear are among the types of motor vehicle accidents that occur most frequently and represent 1 in every 4. And although reports indicate that approximately 25% of all motor vehicle accidents are collisions in the part back, the numbers can be even higher. It is estimated that a rear collision is reported approximately every 20 seconds and that a rear collision is not reported every 10 seconds or so.
Whenever you are involved in a car accident, the first thing you will probably worry about is you and the other passengers involved. The second thing that comes to mind will probably be any possible damage to your vehicle.

Alignment problems

One of the most common problems faced by drivers after a rear-end collision are alignment problems. If you notice changes in the way your
car deals with a rear-end collision, your alignment is probably out.
Some common symptoms of alignment problems are steering, wobbling, vibration and pulling the vehicle to one side.
Bad alignment causes tires, brakes, suspension and other components to come under extra tension, which makes them wear out faster. Alignment problems will not only cause your car parts to wear out prematurely, but can also pose serious safety risks. If your vehicle suffers from alignment problems, have it inspected immediately.

Trunk problems

A clear sign that a rear-end collision has caused damage to your vehicle is a problem with your trunk. Your trunk must open and close smoothly, if not, your vehicle has been damaged and it must be inspected by a specialist.
Although your trunk opens and closes smoothly, it may not have a direct impact on your driving behavior, but it can have a serious impact on resale, can pose serious safety risks and can be a sign of other problems.
Imagine that you are driving on the highway and that your trunk lid swings open, obstructing the view to the rear or, worse still, the contents of your trunk flying through the air. No ideal situation.
As mentioned above, problems with the trunk can also indicate other hidden damage, which may be more serious than initially expected.

Hidden Body Damage

Even if there appears to be no visible damage to your vehicle, critical components can be affected. Under the plastic bumpers, covers and screens there are many vulnerable components, essential for the safe operation of your vehicle.
End-to-end collisions often damage components under the surface. Many modern vehicles rely on plastic covers for aesthetic purposes, but these plastic covers offer little to no real protection for your frame and other essential vehicle components. Behind your bumper cover are a number of pieces that you cannot see and that could be damaged and that need to be checked. Do not rely on the appearance of your bumpers to determine if your car is damaged under the surface or not.

Transmission issues

Unfortunately, the collisions from the front are very likely to cause transmission problems. Many vehicles, especially vehicles with rear-wheel drive and vehicles driven by all vehicles, have transmission components positioned towards the rear of the vehicle, making them more susceptible to rear impact damage.
If there are any problems, such as slipping the gearbox, displacement problems, or leakage of the transmission fluid after the rear impact, you should immediately take the vehicle to a professional mechanic. If you continue to drive with this vehicle because the gearbox shows signs of damage, you are at risk of further and more serious damage.

Do not take the chance - get it out

Even during a slow rear-end collision, the vehicle may be damaged. Behind what might look like a slight wear or bump, serious internal injuries could occur.
Although modern vehicles are designed to better and better protect their occupants, they tend to get damaged in a collision. Although this little dent does not seem like a "big deal", it can affect everything from tire wear to airbag deployment.
The bottom line is that every time you get into a car accident, no matter how minor, an inspection by a qualified mechanic is required.
[img]https://2.bp..com/-wnUQBAm9I9I/XCA00CHe_9I/AAAAAAAAB6w/ihVEM2XgIdod7d2w3fvt1Vk7ooyUYqQGwCLcBGAs/s320/Rear%2BEnd%2Bcollision.jpeg[/img]

Source:
http://www.eliancars.com/2018/12/4-important-things-to-look-for-after.html#more

Parallel parking remains one of the most common concerns for novice drivers. Even drivers with many years of experience can still be intimidated and need tips. Parallel parking can also be difficult if you have spent the majority of your journey outside of urban areas. As nerve-wracking as it may be, parallel parking can be easy once you've learned the basics.
These tips should help you out:

STEP BY STEP TO PARALLEL PARKING

Step 1: Choose a parking space

Before you decide how to park in parallel, step by step, you must select a suitable parking space. For this tutorial, we assume that you park in a parking lot to the left of the car. For effective parallel parking, ideally park your car at a distance of about three feet (about 3 feet) longer than your car. If you are still a bit nervous about how to park in parallel, you may want to allow yourself 6 feet.
Then make sure that the area you choose is safe and legal. Look for signs of parking restrictions or restrictions in the area. Now examine the curb. Be especially careful when the curb is particularly high, as you can damage your car if you misjudge the distance.
Also, make a note of what is protruding from one of the vehicles you want to park in the parking lot. If any of the vehicles have projections, such as a trailer hitch, you should take this into account to make sure you have enough space for your car.

Step 2: Position your car to start parallel parking

After identifying a suitable parking space, you can start with parallel parking. As you approach your chosen car park, head towards the car park and gently brake to alert other road users that you wish to park. Pull up in front of the parking space next to the vehicle until both rear bumpers are in line. Ideally, you should leave a distance of about 2 feet between the side of your car and the vehicle in front of the room. Remember, however, the closer the parking lot is, the closer you need to be.

Step 3: Maneuver your car in the parking lot

If you are sure that the road behind you is clear and you have checked all the mirrors and blind spots, put the car in reverse.
Lock your bike to the left and slowly start backing up. If the passenger side of the vehicle is behind your vehicle in the center of the vehicle, stop the steering wheel and straighten it. Continue reversing until your front bumper releases the rear bumper of the preceding car. Now stop and turn the steering wheel all the way to the right. Continue reversing until the number plate of the preceding car is centered in your windscreen. Now raise the steering wheel again and continue to reverse until you are satisfied with the distance between the two cars. With this technique you move your car into the room and align it at the same time.

Step 4: Position your car inside the parking space

After successfully landing in space, you may need to do some repositioning to make sure your car is parallel to the curb. If you have room left, continue to drive in reverse until you almost touch the car at your stern. Then reverse the gear, lock the steering wheel in the direction of the curb, and drive slowly forward while straightening the car. Repeat this process until you are satisfied with the position of your car. Repositioning your car can be a little tricky in smaller spaces, and you may have difficulty in getting the front of the car as close to the curb as you want. Finally, make sure that you have parked so that the car in front of and behind the vehicle has enough space to drive out.
When parking parallel, try to prevent the front of the vehicle from moving too quickly into the room. If you do so, you risk a collision with the car in front of you.
If your rear wheel touches the curb, you do not need to be alerted! They have come back too far, but they simply shift out of reverse, moving forward and starting the process again.
[img]https://3.bp..com/--BacaLovAfE/XB-Wh_9ZwzI/AAAAAAAAB6Y/gmHdp0JdeWgchYfQ032cCCLKuY26zqzUgCLcBGAs/s320/parallel%2Bparking.jpeg[/img]

Source:
http://www.eliancars.com/2018/12/how-to-parallel-park-tips-on-how-to-do.html#more