Obudupikin:
E resemble viper o . And vipers na very harmful snake o. Your workers na heros abeg, give them a raise.

Raise in pay or killing snake?
No!
Lol

techWriter3:
congratulate God, you remainedn't around when they saw the snake

Lol
Snake offend u?

Judybash93:


And you're wrong... The head is a dead giveaway... That's a Ball python

Truly using the morphology of the head I agree it's a ball python

Venymen:
This is a non venomous snake ,it's one of the phython species,u for no kill am

They killed befor I got to the farm

Ofemmanu1:
So, wetin con happen to the body?!

was it ppsoup?

Buried

Won't allow dem eat such

Cyphar:
I hope say dem no wan waste that meat?

I instruct them to buried it

Just this evening, my farm workers killed this snake, came so close to my poultry pen A, if I was around wouldn't have allowed them kill it,
Snakes are not that harmful as thought

Dude already beheaded the poor thing

[quote author=revcompaty post=113517340][/quote]

Still available

triplek2000:

lol
wetin you drink

I just weak
Lols

I'm a livestock farmer and I need to change my car, now thinking of either getting a Nissan Serena or opel zafira putting into consideration thaat I most time need to pick feeds and Eggs through rough path..

Will be expecting profesional classification and recommendations
Thanks

Cares OF Eggs available on our farm located in Abeokuta via itta oshin axis
.
Price : 1450
Size : medium and small unsorted
Contact : 08022376900

iliyande:


My first car was vento, second car was opel zafira A, third was zafira 2.2 and my current car is Opel Signum 3.2 v6..., I may go for audi A4 next.

When you don't know anything about car, please stop advising people based on your own personal experience.

Even if you dash me corolla today, I am selling it next day... Camry, lexus E Series and Avalon is what I may go for in the next couple of years by God's grace.

How rigged is opel zafira, plan getting the tokunbo for personal use

Good morning great minds..
Can some one recommend a good mppt cc for me..
I am Base on ibadan..
And will any of the below be recommended?system is 24v PVC and 12 volt baterry, formerly using a 60amps PWM cc but wahal Wan kill Me with low charge

gadgetplanetng:
PWM charge controllers behave the way you just described when you connect a 24v panel to a 12v battery.

They drag the voltage down to battery voltage so you end up using half the panel capacity.
An mppt would use the panel voltage and adjust current accordingly.

But it should still charge



1. You should be able to adjust the charge settings in the cc
2. You can get an MPPT cc
3. You can get 12v (18v) panels

I'd have added upgrading your battery bank to 24v but I've not had a good experience with pwm and 24v.

Thanks sir
I appreciate

How can u adjust the charge settings via cc?

ceaser:


@bolded is quite untrue.

The MC4s are designed to ensure perfect and fit contact with themselves. They are weatherproof and designed to last the lifetime of the panel. They are also rated to handle the current that flows from the panels. That is why arcing is quite uncommon at their points of contacts when used in installation, whereas the naked wires (after the MC4s are decapitated) will form arcs when huge current passes across the twist junction. This gradually weakens the joint and eventually the joint burns out, disrupting flow from the panels down to the CC, hence your voltmeter may give correct voltage reading at the termination on the CC, but no current will be detected by the CC. The naked wires too (even with black tape insulation used), are prone to oxidation as they get exposed to the elements.

So if the problem of arcing does not occur soon, oxidation will definitely come along later. The wire develops depositions, the strands become brittle and break off easily. You don't want to have this kind of problem if your panels are roof mounted where they are not within easy reach.



I guessed as much.

If your panels are roof mounted, sorry you will have to climb back on the roof. If it is a weak joint, twist the wires well. If it is an arc joint (with dark burnt junction and melted insulation), then you have to cut off the bad section and make another twist. After the correction, check back on the CC to see if its charging.

But I can assure you that the problem will likely repeat itself later on as it has to do with the junction not being optimal for the current coming from the panel.

So your best bet, which I implore you to do, is to purchase MC4s and rẹ-fit back to the panel wires.

Thanks so much
I just got a meter, the cable reads 33v when removed from the cc, but reads 12.5v after inserting into the cc, I have climbed the roof top check the joint, theres no acrk or so but I haave retwisted and still the cc dint display the real volt I got from the pv

ceaser:


Maybe I should ask you this: Were the MC4 connectors of your panels left intact by the installer or they were cut off? This is important especially as you said it is a new installation that has worked for only three days.

In instances as where the MC4s are removed, the twisted panel wires often form an arc at the junction of the panel wires and the wire running the rest of the way to the CC. With the arc formed at the junction, a voltmeter may even show normal panel output voltage when measured at the point of entry to the CC. However the current required from the panels will be low or non-existent as shown by the CC.

Thanks for the insight, the wire was cut off and joined den covered with aa tape, if it was the arc formed causing the low voltage what's the possible solution sir?

earthrealm:


Yes have someone looking at the cc screen while you run the blender for 1min and tell me if anything changed

Nothing changed sir

What I noticed befor now is that their is a drop in voltage anytime I off the circuit breaker connecting the panel to CC..
The system was okay yesterday am just Suprised

earthrealm:


How can you post this, without a picture of the cc display or even give the specs&model of the cc?

In the interim put a heavy load for 1 minute on the inverter and revert

Edit:..good you have attached pics, is this a new setup?.what voltage is the bulk/absorb settings on the cc.
Still do @ bolded with a 300w load

Yes it's a new set up, started using 2 days ago
Absord is 14.4v
All my combine load can't be up to 300w, but I have an electric grinder that is 350w, can I power it for a minute?

ceaser:


Do you have a voltmeter to check if voltage is coming down your panel wires?

What kind of CC is it that you use sef?

No I don't have a voltmeter, it's a famicare 60am PWM cc

earthrealm:


How can you post this, without a picture of the cc display or even give the specs&model of the cc?

In the interim put a heavy load for 1 minute on the inverter and revert

The picture dint load earlier, kindly check again, am currently using the system as we speak and charge icon not yet on day mode

Greeting great mind..
As at this time 9:50am my charge controller is still on night mode and have not been charging my battery..
What could possible be the cause and how can it be corrected

Details
120 amps battery
1pcs 280 watt panel
60am PWM charge controller
1.5kva inverter

Regards

Nostradamus1:
pls boss how does airtel mifi bonus work? i have to recharge to get any bonus right?

You have to sub 5k monthly for 4 month I guess to get the monthly bonus

Someone posted dis in a Whatsapp group, how viable is it?
Cos am certain a 40amps battery can't do half of the above mentioned

Someone pls recommend a low budget PWM charge controller to charge my 150amp battery, already have a 180 watt solar panel,
Adding anoda 180 watt should do the work right? And shoykd I upgrade my inverter? Currently using famicare 1kva (white one poking like a stabilizer)
Awaiting Profesional advise

Greetings great minds,
Will the help on this thread and little experience from the guy that installed my mini solar package on my farm for lighting and charging,
I tried setting up just am inverter system at home, which comprises of a 100amp battery and famicare inverter, I rely on Nepa light to charge and at full charge I can power my TV, home theater and candle TV for up to 9 hours (7pm to 11pm for 2 days)
Past week the Nepa av been fumbling so I later opt for a 180watt solar panel 3pamp charge controller, but ever since have not been able to use for more than 3hrs till the battery goes down, a certain day we have Nepa light I have to remove the solar panel from the controller so to comfirm my usage at night and I found out I was able to use for 5hrs plus even with the little Nepa light that charged it,

Pls what can I be doing wrong in the system?
Am actually thinking if its the 4mm cable used to connect the panel to charge controller is too small,
Should I opt for the 6mm cable

Will be expecting Profesional advice
Regards

Have been seeing massive advert on restore engine fluid which u mix with your engine oil during servicing, claim to restore a smoking engine, reduce fuel consumption and co

Now who have tried it befor and how effective

FutureFocus:


The 50 meters is 52k online, so I think selling 20 - 25 meters for 15 to 20k is very reasonable compared to this, the truth is I can’t sell it for you for 10k just because your budget is 10 Sir.

That one may even be a Chinese product


Compare to mine below .

Me price 10k keh
No be me be that one oga, I don't even responds after getting the exorbitant pricec tag, u tried explaining ur self while I ignor till date..

I don't have strength
If I go ladipo or ijesha warehouse I will get it far below that ur price..

sucess001:


Watch till the end

Done already

Started last week and I concluded it dis morning befor I wrote my review..

They sure tried but nothing close to GOT

A medium Scale poultry farm located at Bakatare Omi adio of ibadan needs an IT or Siwes student.

Accommodation is available on farm

Contact: 08022376900
HollaAgro

twinskenny:


I need the extension and the cutting machine.. put price

Have u receive the shocking price yet?

sucess001:
If you have not seen this...you are dulling big time!!!



https://www.youtube.com/watch?v=CBgiMD0KL3s&t=8s

I use God name beg u
No try dis kind talk next time, I started watching the series immediately I saw dis thread, it's nothing to compare with GOT,

Haha
Dff is very clear