₦airaland Forum

banmee:
You need exposure. Governors should not go around making donations. You all don't ask questions. Where is the money coming from? Is it his personal funds? How can he afford it? Is it from the state budget? If it was, was it budgeted for? If he is so compelled to donate money, for the sake of transparency, an NGO should be established where private organizations and citizens can contribute. That is how it is done. Remember, Dasuki went around donating to evey tom, dick and harry and people like you were congratulating him. What is the reality today? Not saying that in countries like America, governors may or may not do such things, but it is easy to track where the money is coming from. As far as i know, they don't. They are smart enough to avoid such things. Nigeria does not have such checks so it is easy to divert such funds for personal use as seen by the Dasuki saga. You guys need to wake up.

Oga,
Mr Peter Obi is not the present gov of Anambra state and presently holds no political appointment in the state. Where's your exposure? Pls take ur advice and wake up.

OP: banks don't use CBN rate for ur purchases abroad. The only way u get CBN rate for fx transactions is through approved forms M and A. Havent u been listening to your president? Lols. Pls be guided accordingly, ur card transactions are sourced from parallel market.

[quote author=AtlanticBreeze post=43730216]so why didnt he do it in his 8 years as governor? Is it now he is waking up? Peter obi is a fraud[/quote

Smh. Wailers everywhere.
Someone makes a donation even when he is not obliged to, u wail. Why don't u go and make your donation.

OP pls post link for them.
@ all asking for link: why not go to zenith website to apply. The post says apply online, so go to website and click on "careers"

My personal experience with Sir Collyns Owhonda shows he has always been a man of the people. His office in d-line is always home to folks from mile 3, mile 2, Ust axis old and young. Was always surprised each time I visit and see a lot of ikwerre people waiting to see him... And he makes time for all of them..even when he doesn't kno dem personally and without prior appointment. I wish him well.
NB: my encounter with him was between 2009- 2012. If he cared for his people den, I believe he also cares now.

I sincerely pray this is not a case of an estranged wife trying to get back at her husband. Nothing could be worse than rotting in jail for a crime u didn't commit.

jisike John

I don't understand, can't u help your brother quietly/secretly without your wife knowing about it? Since u already know the tension it causes. Must you continue helping him openly? A simple transfer into his account solves all your issues sir.

I believe that manager is the type that feels like a man when he is shouting down on poor subordinates. Such men are the direct opposite at home as they are scared of their wives. His attitude at work reminds him he is a man and he enjoys it. (Something he lacks at home). So my guy, harrass him back and he will back off and take his attitude to another poor dude. Shikena. Mind u im talking from experience and I kno where y work.

guy no resign ur employment becos of ur fellow employee. he was not the one that employed u, the board approved ur employment. what he is doing is jerk behaviour and you need to stand up to him. do the following: 1. resume work daily on or before 7:20am. 2. do not talk to him except when necessary, dnt even greet him. 3. do your work well, drop the ones requiring his authorisation on his table and put the time beside your signature as u drop them. 4. try and conclude your work on time and close 6pm latest when possible. this will enable u to be fresh for the next day. 5. do not stay back late because a work that is not ur primary job function. leave dem and go home and do dem the next day. 6. if the branch is understaffed, then the extra work shud be shared equally. if the extra work is given to you alone, leave dem and go home once it's 6pm. let him escalate if he wants. (but inform the man as at the time he ls dropping dem on u that u wil only do them wen u are done with ur primary job function). work smart. drag ur own function till 6pm and den close. note that when the extra work is shared normally, do them timely esp when dey are urgent. 7. whenever he shouts at u in front of customers or junior staff (when u hav done nothing wrong), shout back at him immediately in front of the same pple and warn him never to try it again. let him escalate it if he wants. Do Not Resign Because of Him, cos that's what he wants. He has achieved his life goals and does not want u to achieve urs. Do not let him win. Fight, fight, fight. I wish u the best, and I know u will come back and testify. I almost forgot, pray hard every morning and night as well, pray for his or your transfer from the branch.

where are u located? can u supply to port Harcourt? what % is available and at what price per ton? I will mail you soon

I am interested in iron ore. Delivery to ph

I am interested in iron ore. Suppliers needed urgently.

Hope the normal data codes for glo, etisalat, airtel and mtn works on this fone.

OP where in PH is this?? Stop misleading people, THIS IS NOT PH!!!!

Vanguard newspaper today , same story. *smh for op* http://www.vanguardngr.com/2015/04/i-woke-up-to-find-my-boss-in-my-bed/

How much to install in PH? Total cost

Pls show pix of aluminium rails for balcony/stairs

@ eghjosajohnny,
Thanks a lot for your suggestion. However, I've decided to leave it as it is and proceed with the upper floor as suggested by the majority.

What future damage/disaster do u think will arise if it is left this way? Please explain further, thanks

Thanks all for your suggestion.

I've actually thought abt moving the furniture thru the balcony. I want to know if there will be a better option that wnt involve much structural changes.

@micmoh, I'll also look into your suggestion as soon as I get home, on the road now.

I called the builder when I came back and saw it. He claimed he used the dimensions in the drawing.

I just want a to fix it b4 continuing with the building. The stair case leads to master bdrm, children's bdrm and madam bdrm. I'm just wondering how we'll move the bedroom furniture upstairs thru dis tiny stairs

I called the builder when I came back and saw it. He claimed he used the dimensions in the drawing.

I just want a to fix it b4 continuing with the building. The stair case leads to 3 bedrooms and I'm just wondering how we'll move the bedroom furniture upstairs.

Thanks all for ur comments.
The outside staircase looks fine but I dnt think I should adopt it cos of security. The tiny stairs is actually for the duplex part of the house.

Floor plan and first floor pix attached.

Hello all,
Please advise on the best way to sort out this issue. I feel the stair case is too tiny. The house has been decked. How best can we expand the stairs without much damage to the structure.

Please ideas from everyone will appreciated, feel free to comment.
Thanks

I may be contacting you soon, but ur price is the standard ph price na. My location is Rumuigbo

Is this tutorial still on and How much is the fees?

erico2k2: Good Job,Im not a civil Engineer but a mechanical Engineer, I realy wished I studied Civil as I have to re learn now, Just went fru ur post till this stage, I have two structuaral advice and one labour advice here for you, might need to give you diagrams later, since you do this for living in use of planks to mould the lintern U could haved fixed ones made out of plywood an inch thick that you keep at ur storage, that way you can re use them again and again, that way you would save cost for your customer bringing down the over head by more than 200K.Next, have you thought of Angled bar arrangements in ur pillers instead of using the conventional 4 iron roads knitted together on a rectangular frame?

Pls enlighten us more on the angled bar arrangement. Thanks

Thanks a lot. I'm learning

U didn't answer whether it was 12mm or 16mm that u used for the decking mat. Thanks

Oga segzy, well done bros!
Pls was it 12mm or 16mm rods that u used for the decking (the network of rods as shown in the pix above with concrete cast on it). Also how many tons (of rod) was utilised? Thanks.