some lies they this report

Hello guys

Abeg anybody know where i fit buy original coolant for Toyota in Abuja

Danthemariner:



Pls help... My Honda EOD 2005 steering vibrate wen ever i hold brake... But wen I'm on speed it moves normal., but once i hold break my steering vibrate.. Pls help

brake disc might be the culprit here

shuri:
Hello friends, I drive a 2008 Honda Accord, I changed the tie-rod and stabilizer linkages, I noticed the mechanic also disconnected my battery because I have to input the radio code again when I picked the car. The issue now is that the temperature gauge on the dashboard gets to H within 2 mins of driving, both fans work, radiator has coolant, engine wasn't too hot, the coolant wasn't too hot too. I dip my finger. Please what could be wrong? Is it the temperature gauge that's misbehaving? Please help me.

nurey
gazzuzz
kingrein
All please

Happened to me last month too, same car.

first of all scan your car just to be sure what the problem is

My own problem was the Engine Coolant Temperature Sensor was bad. Thank God i had a spare i bought sometime ago.

I replaced it and everything came back to normal.

Please note that there are 2, one on the engine on the driver side, the other one is on the radiator(mine is missing though).

So scan the car first to be sure that's the problem and start fixing from there.

cheers

showietee:


Good evening, please my 06 civic is not firing properly, whenever I slow down or climb a bump, it does not pick up back immediately and sometimes, I will have to turn off the ignition and turn it back on before it speeds normally.

Scan the car ooooooooo

then share the code here for others to help you.

HilcomTech:
Good afternoon gurus in the house

Please does anyone know where I could get the following in Abuja

1) O2 sensor for Toyota Corolla 2010
2) Mass Air Flow sensor cleaner

I live in Abuja

Just contact luvinhubby you will get it in 2days tops in Abuja... I also stay in Abuja and i get my spare parts from him

Kieseni:
Good morning car gurus,

My RX350 has been having issues. Steering has been stiff while turning, steering rack has been changed, but the issue still somehow exists. The engine also misfires, check engine light is on. So i decided to scan it. I have a small ELM 327 device. This is the result. I looked up the solutions and honestly, i still have some issues.

Sir, what do you advice?

with respect to the misfiring, the error code is there.

Two of your ignition coils are bad (D and F)

So you probably have to change them. If you have money sha just change every thing.

For the steering, i will allow my oga at the top assist with that one

Bigsunny01:




Yes i actually did a scan before changing all of de above i changed

I think i need to do rescan to be so sure

exactly

Bigsunny01:






Good day Oga Gazzuzz and all car expert in here.

I drive Honda Civic 08, the fuel pump and filter have been changed, i have also changed the air flow meter, upstream oxygen sensor and coolant temperature sensor.

The worst part of it though is that after i changed the above mentioned the engine still shutoff while trying to accelerate in idling, with the dashboard lights coming on. The car can be restarted immediately though. It normally occurs when the Air Condition is on, and i also notice my D(dive) green light blink at times when driving

The car is an American spec

Your advice will be highly appreciated

Thanks.

did you scan the car before changing all these sensors?

The "d" light blinking is not a good sign oo, something is wrong with your transmission

Please go and do a full car scan.

jinka:


Last week I noticed that check engine light and another light on my 2009 Corolla dashboard, I went for scanning and they said it's tire pressure and bad fuel. They erased the lights. Then after 2days the lights returned again.

What should I do about this issue now pls?

Go back and scab again. this time make sure to put the code here so that others can help you

Nafizzey:
Please car gurus here I need your input here, my Car 206 check engine light has been blinking for days now from Tuesday precisely, though I don't feel any changes from the car making me surprise what could be wrong. I call my mechanic to explain he said since the car is still moving fine, I should manage to weekend when he returns from Sallah break.

I hope there's no danger in still moving with the car though i don't do long distance, just office and work? from experience Car gurus here please Gazzuzz

So you are waiting for the car to mess you up first before you take the car for scanning?

because i don't understand

haslaw:
Good morning GAZZUZZ and other car gurus in the house,

I have a Toyota Corolla 2010 and the check engine light came up. I used my OBD2 scanner (pictured bellow) to scan it and the following error codes came up
P0201
P3806
P0700

I once read somewhere that error codes should first be cleared and the car driven but if they returnm you would have to carry out the maintenance required.
I cleared the errors (without doing any maintenance work) and the check engine light went off. I have driven the care for 3 days without the the light coming back on. My mind is somehow not settled. Am I doing the right thing?


cc: dru23

Yes, if the light comes back on, then do a check again for the codes that come up.

meshzhi:
Sir , I have an issue on my car that I have tried all possible best to solve but to no avail.
I drive a Toyota Corolla 2009 , toks.
Never had an issue since 2019 ... Not until last month I discovered a hum noise... At first I the mechanic told me it was my bearings... So far... I have changed all my bearings and the noise still persists.
When I speed more that 40mph d noise starts
Secondly, yesterday I discovered a new problem, when I'm in motion and I apply brakes , my steering and the brake pedal shakes vigorously
@ GAZZUZZ BIKO HELP YOUR SON

for steering and pedal vibration check your break discs... it's the common culprit here

Besto:



Brain Valve ke.

I no be mechanic ooo.. But brain valve weak me.

Lol...

Originakalokalo:


Is he to be trusted?

I am getting shocks and plugs from him...

So far so good i have done transactions with more than 400k

and i have never complained about anything i bought from him

you can sha do your own research... but for me i trust his parts

Originakalokalo:


Thank you. I stay in Abuja.

He does same-day delivery... I stay in Abuja also, i buy all my spare parts for my accord 2008 from him...

Burchester:
My Honda Accord just came back after exhaust repair. And now cruise control is not working. What could be the problem ??

They obviously touched something...

Scan the car and hopefully there is a code that might point you to where to look

Peterlove11:


What do you mean by underpowered......are talking about the driving feel?

he is talking about speed...

Imagine driving benz almost your life and then switching to a toyota...

adetunjioludami:


No Sir. I'm not sure I and my mechanic knows what this is.

LMAO

dayveed1:
I'm having a similar problem .
My car vibrate when I speed above 80 and also when I march the break while speeding.

your own case is different oooo...

first of, check your tire alignments

go for wheel balancing

make sure all your tires are gauged to the correct pressure

if none of the above works... then check your brakes (especially the ones behind) and brake disc for damage.

Originakalokalo:
Thanks to everyone who has contributed to this thread in one way or the other.

My Honda Accord DC 2007 vibrates especially while on drive and the brake is pressed.

If I change the gear to neutral, the vibration stops.

If I remove my leg from the break and the vehicle moves freely, there is no vibration. Everything becomes normal.

Someone should please help profer solutions to this...

Thanks.

Definitely engine seat.. Go to your mechanic and tell him to check your engine seat...

ReformerD:
Please, car guru in the house, please what does this sign me in a car and what can I do to completely fix it

Okay.. I started noticing the light after the mechanic work on the shock absorbers and the steering rack

check sensors/wires around the shock... he has tripped something.. that sign means something is wrong with your traction control...

GAZZUZZ:


what of Injector on cylinder 5 and valves on cylinder 5

Misfire occurs when the combustion reaction does not occur correctly

Sorry, Sir...

Yansham:
I observed my car drags or lags when accelerating. Subsequently, the CEL came on.

Upon scanning, I got P0305 (Cylinder 5 misfire).

Please what could be the cause?

the spark plug for cylinder 5 is damaged or the ignition coil for cylinder 5 is damaged...
you will have to run tests to determine what the main culprit is....

luvinhubby:


Did you say you used Total Quartz for your transmission?

lmao...

I stay in Kaduna, luvinhubby delivers to me latest in 2 days... most times when i order in the morning, he sends the item with the next bus coming to Kaduna and i will get the item the following day... so just call him and order

Teeboi3611:
Good evening house,
My Toyota Matrix gear delay before changing when driving that mostly it’s difficult to accelerate and makes a lot of noise when forcing to do so. My mechanic says It’s not the gear since it changes but the wiring.
How true is this pls

go and scan... then come back with results

Ernesttoby30:
Please who has a trust worthy honda parts dealer in ladipo? My Honda civic 07 is drinking fuel like water and i was told to change the Oxygen sensors.

Please treat as urgent

go and scan first oooo

contact luvinhubby for honda parts

Deigofortune:
Good Evening House..!!
I scan my Honda civic 06 this morning an it gave me this code

P1659
P2185

My car electrician advice me too change my injection mouth...I don't know if it will helps out.... Because my engine keeps going high and low..

Pls who can interprete or explain this for me..

did you service the throttle body recently?

Hello house.. Please help i drive an accord 2008 4-cylinder

I scanned my car this morning and i noticed my car was running rich.. You can see from the image below

When i start the engine from cold, the short term trim goes as low as -10% at idle before settling at a range of -3%—7% .. After while the long term trim starts also reading in the negative also.

Also i noticed the fuel system status is reading CL_fault which means something is wrong with closed loop system

And then the 2 codes

P2185 - engine coolant temperature sensor 2 high
P0141 - O2 sensor heater bank 1 sensor 2

As for the P0141 code i want to believe it's there because there isn't catalytic converter in the car.. I bought the car that way..

Please help guys


Oga Gazzuzz and my other ogas please help

Hello house.. Please help i drive an accord 2008 4-cylinder

I scanned my car this morning and i noticed my car was running rich.. You can see from the image below

When i start the engine from cold, the short term trim goes as low as -10% at idle before settling at a range of -3%—7% .. After while the long term trim starts also reading in the negative also.

Also i noticed the fuel system status is reading CL_fault which means something is wrong with closed loop system

And then the 2 codes

P2185 - engine coolant temperature sensor 2 high
P0141 - O2 sensor heater bank 1 sensor 2

As for the P0141 code i want to believe it's there because there isn't catalytic converter in the car.. I bought the car that way..

Please help guys

kingreign:


You need to replace the Electronic Load Detector relay after thoroughly and carefully checking that all other electrical contact points and electrical components such as Alternator, AC and eve the ECM and its own programming are within specs.

What recent thing or repairs did you do to the car to pop up such code?
It must be done by a competent technician tho.
Where is your car located?

Oga kingreign.. How can i contact you.. I need your help...