₦airaland Forum

KolaShangOne:
They're in the USA.

Can't deal with importation wahala.

maysoft:
That land cost me 18.5m.

KolaShangOne:
Baba.. I wasn't asking to know if it was your project or not though..

I was asking because of the quality of wood. It looks imported, like "packing case".

I was more interested in the wood and what I can do with it..

Last time I got imported treated wood, I used it for "floating bed design".

michlins:
As an artisan, it's very important to make your job look as beautiful as possible.

Whether it works or not, first looks matters a whole lot

AlphamaleTech1:
Let me break it down so you can understand perfectly.


We construct 2 holes uhn, one is to degrade the human waste while the other hole is to absorb water.

The first hole which is the digester itself has no business with absorbing water.

The second hole is the soaking pit which absorb water.

Now the second hole which absorb water is always installed with blocks.

It's never the duty of a digester to absorb water either you use a concrete or u make use of blocks

sonnie10:
Now you have established an assumed gradient, “little or no water” . Therefore blocks which is more absorbent is likely to be best material than cast. EOD.

Don’t mind me ooo! I am just catching cruise.

sonnie10:
I understand you aim for it to look presentable but my major concern is to create an environment that would optimize the reaction.
The amount of water in a cast system would definitely be quite different from that in a block system.
The question is which of them offer the best condition for optimal reaction?

AlphamaleTech1:
If this can be constructed, the mode of installation and activation will still be the same right??

sonnie10:
Thanks for the insight. But is there not supposed to be an optimal poo water content for the fiber to work effectively?
Simply put, the fiber might not work well with too much or too little poo water content.
In chemistry, we were thought of equilibrium of chemical reactions.

sonnie10:
It looks like casting would not serve the purpose here. Solid block is more porous and absorbent than casting.
With casting, water would be retained in the system and also the water retaining would have adverse effect on the active components reaction on waste.

If casting should be employed, it’s most likely going to be just aesthetics.

AlphamaleTech1:
Yea am trying to improve and thanks for that.

Will try that next time and probably stop the usage of blocks, just casting.

Thanks again.

AlphamaleTech1:
Here is the last one I did after I left his site, am not posting this to show any sympathy or whatsoever but to let u know that installation involves same method, only the outward appearance will make the owner praise u.

This is above the ground level, therefore people will be seeing it day to day unlike the ones that will be below the ground level and not seen.

Damilaresimon25:
To be candid this is the best av read here.

I made my research in this bio digester coz I planned to install in in my building in future and all I came across was the same thing the OP said the engineer used. I realized Coconut fibre can actually reduce human waste to minimum and that's what all those installing it make use of, I also realized using of blocks can absorb much more water than expected, the only thing I see wrong is the outward appearance of the work done, the OP is ignorant of what and what is used for installation. All the engineer need to do is work on how the outward appearance looks like, but for the materials used according to the OP is absolutely right...the OP should make his research before tarnishing someone images... Peeps here can make research on materials used then conclude if he)she is right or wrong.

Jeff68:
Please house, i am taking down my comments on bio digester, the man is begging and my heart is to soft.

kopell:
I don't understand why people don't do their diligent before engaging this guys with their hard earn money. Without any experience on Bio Digester I can do better then what you posted. There is no need to hide his identity, you need to shame him here so others wont be victims. Many of the veterans we see now off and on posting their jobs, not mean they are not working, they are just to busy because of these kinds of cut and paste nonsense. I hope they all come back to make section be what its used to be 8 -10 yeas ago

KolaShangOne:
Think it's around 8500 - 9000

MRFIXER001:
I'm impressed

KelvinCoaster:
This is massively apt...
The sky can't be your limit!

FEGEITOK:
Thanks for sharing your trade secret

FEGEITOK:
So I did some more research, you can treat your bamboo for longevity

sonnie10:
What you have to always remember in a faceless forum like this is that some people here are under covers trying to rope unsuspecting people into their trap. That is how bad the world is now.
At the end of the day, when they start dealing with their victim, they won’t say it was an entrapment.

rmx:
@ next , your people delivered

Eventually went with them

rmx:
@ next , your people delivered

Eventually went with them

FEGEITOK:
So I did some more research, you can treat your bamboo for longevity

Here are my findings:

This maybe interesting to you uncleteeh

n3xt:
Free Rubbles!!!

I have a good quantity of rubbles to dispose. You can take as little or as much as you need.

Come with your truck/pickup.

Collection Point: Oshodi

Interested?? Pls call 0700NEXTHOME or 080234291 22

FEGEITOK:
Are Bamboo Panels sold in country? Or will I have to make mine if I intend to go this route?

FEGEITOK:
I doubt, you can see the source of my inspiration here:

https://credenceindustries.com/portfolio-grid/

There is an example in the living room that I didn't post here

FEGEITOK:
Seeing these pictures unleashed my creative juices

So I started thinking, what can be achieved with bamboo which is readily available locally and found these.

Hope these inspires others as much the pictures you have shared have inspired me to do more with wood

n3xt:
Looking for Rubbles??

I have a good quantity for quick sale. You can take as little or as much as you need.

Come with your truck/pickup.

Collection Point: Oshodi

Interested?? Pls call 0700NEXTHOME

kopell:
What is the point of doing business in secrets, you guys should understand in dealing with one customer many other potential customer are witching, don't be suppressed after making it public many may call for the same product