₦airaland Forum

Ayohbk:
Hello All, Thanks for your feedbacks. after several back and forth these are the costs paid and work have started already. Just dropping the information for anyone else who might need it.

Omo on Ile #1,350,000
Safety Commission. #200,0000
Town Planning Office. #200,000
These were paid Last weeks

Then Labca were paid 1.3m. Tried to beat it down but they didn't agree. Even after the 1.3m they gave conditions that we should finish the work quick before they move their oga. Else we'll have to pay another Money if we stop and restart some other time.

Nigeria was really a country.

Thanks for your inputs. Cc diordaves acmebuilding Billions123 gabbytabby kopell and everyone else

It’s good as you repotted back,people will learn one or two things from this, more so Materials Testing personal might show up oo

inze:
. . . most likely.

Most of these fancy mixers are meant to run with a pressure pump as they have smaller inners for water flow. A client had similar experience and it's solution is getting quality "full-open" mixers n faucets. Usually don't come so fancy though but gets the job done. You can browse through Sweet-home product in your locality (not an advert) they mostly come in knobs-style open and close

@rotech would remember this also

Yes, I can remember the scenario then, you are 100% right with the way you explained those faucets/ taps
Reason why it’s good to use full inner gauge gate valve for central toilet control to allow full pressure water supply into toilet and kitchen.
Only that to get good quality now is very scarce,, instead we used stop cock mostly now and this doesn’t allow full water passage at a go.

Pics 1, stop cock
Pics 2 gate valve

More pics from our ongoing project

Our Ibadan project is also in progress

Almost done with pop ceiling work here.
Tiling and some wall screeding loading
Watch out for more

Still on the finishing aspect

kopell:
Please let gard people with right information. Every building as different history. If you see me write anything here is from my personal experience NOT them say I did it. I just finished one of his similar case I build the house in 94 with every government approve. Chose to renovate 2 years ago just like everyone else, government official show up asking for renovating permit, don't have one I thought its was a joke fast forward continue work. they can back few weeks later with stop work Order. As stubborn man I call my connection at the top in Alausa. He told me I should know better their are process I have to follow before I start now. He sent me back to the local branch, to continue the process. When they sent me the requirements I look at it as waste of resources on the old house I chose to bring down the house, that when the drama start all over, all those requirements which I follow through. I couldn't believe this people have so much time to come for inspection, from set back, checking if what we have on drawing is what we are building as we progress, on the project even till the roofing stange. So please if they don't come for you, don't think the dont work . You may just be lucky. If they caught you at the middle, trust me you will pay all those fees

Baba you will not die untimely death,
If we tell them they will say those Engr has come again with dubious way of supporting where they will see money to chop.

What you said is 100% on point unless if you build in hidden area and they didn’t notice on time, once they notice it they will still serve you letter..

Even demolition has permit, let alone full renovation work.

Did you know that cost of electrical work in a construction project typically falls within a range of 3% -10% of the total project cost( this covered materials, labour, overhead charges) , depending on factors like project complexity, material choices, and location

FACTORS THAT INFLUENCE LABOR COST/RATIO

Several external and internal factors can impact labor ratios:

Project Complexity: Complex projects often require specialized labor, increasing costs.

Geographic Location: Regions with higher living costs typically see increased wages.

Market Conditions: Labor shortages or high demand can drive wages up further.

Project Type: Residential, commercial, and industrial projects differ in labor demands.

Technology Adoption: Automation and prefabrication can improve productivity, reducing labor ratios over time.

kopell:
Some of us care ooo. I will soon take front seat in your lecture room. Ramada Kareem, to all our muslims brothers and sister.

Thanks baba agbalagba
I will surely post it bit by bit

Did you know that materials covered about 65-75pec of total cost of construction ?

This is for educational purposes only for who care to know

Watch out for more tips

Watch out for more update here

Did you know that cost of Labour covered about 28-35pec of the total cost of construction?

Anything above this is reap off

Finishing still in progress

Odunharry:
Well done bro

Thanks so much sir

Arbo contractor Ltd

Still available

More pics update

Valuepaints20:
We are trusted and Quality guarantee company.

For quality your painting jobs

Call/whatsapp:08163862804

We bring quality to your doorstep nationwide.

This looks nice as usual

Valuepaints20:
Weldon sir.

Thanks chairman

Coming out gradually by gradually

Pop ceiling still in progress here

https://www.nairaland.com/8006396/construction-royal-hall-mega-eatery

Pics update

Happy jumat to all Muslims that are here

Stayed tuned

ibadan project update

Still available

Pop ceiling still in progress in Bld 3

More coming soon

More loading

Game house slab casting done