₦airaland Forum

Soon

More update coming soon

gbadexy:
A big thanks for oga spyder's contribution and prayer.
#bringbackhajjmufuta55.

Thanks for this

#bringbackhajjmufutau55#

Before we stage a protest at NL tollgate here.
I believed some pep remember about 12month ago or there about when almost Every notable fellow left this thread.
I make a post as this with almost every one names on the list then , thanks be to God they came back then.
Now it’s going back to same OLD way again.
Why.
Don't forget everyone gain from this thread and others personal thread.

Good morning to you all and happy wkd.

Consult a professional builder to get your project done in a standard way.
This doesn’t cost much.

More update on the way

michlins:
so please sir, how does asking the alumaco guy which measurements he's adjusting with become a case of fraud. Now I asked alumaco, how many are you adjusting to fit and he told house owner that I wanted to shorten the sizes to make more money.

I understand you my guy.
But you know what, don’t let flog the matter here much just liaise with your cleint I believed he is a listening fellow, he is the one that gave you work don’t tress your self much about the Aluminum guy.

I will suggest you take your measurement next time when the wall is plastered if time permits .
But if it’s urgent deal let the site engr or your client know your measurement before given the price.

Let’s do small tutorial on door ( let’s use ft and inches here)

Regular 3ft door as example,
- wall opening size width 3ft
- wall opening size height 7ft
Door frame 7*3 ft

Door leaf size; you will reduce 2” (50mm) from up, side A,side B and threshold[(this will take care of tiles or any floor finishings thickness)
( this reduction is for the frame)]
Now your door leaf size will be
- width 2ft 8”
- height 6ft 8”

So don’t expect your door to be 3ft by 7ft
When your builder, engr, or artisan deliver your door

n3xt:
I never see your brake light for the other side. We need to be having short lectures like this once a while to educate ourselves on why we do what we do.

It’s very important.

I will surely visit the other side soon, I’m a member already since some month ago.

n3xt:
Thank you Tisa Rotecch77

My chief i Dey loyal sir

I was lucky to be lectured then in sch by formal NIOB President (Nigeria)

Let me talk Generally on burglar bars
I’m not using this to support any side.
As I was thought in sch as building tech student then which I’m also putting into practice at site.

Case of burglar bars
Let assumed your block opening is 1200*1200
You need to reduce 25mm from all four sides of the WALL OPENINGS.( this is for plastering gauge)

Then you will also consider 15mm reductions from all 4 sides agains ( for alignment)

Now you will left with 25+15mm =40mm
You final burglar size to be delivered to the site will be 1160mm * 1160mm.

This also applicable to door.

We are affordable

n3xt:
Sand Mining

Good morning!

Anyone with idea on how to build a mini sand dredger or where to rent should please share with me.
If you can also provide me with information on where to get local miners, I will be glad.

I have a parcel of land that I’d like to restore its shoreline.

Thanks.

______
Pic - Soil samples

For local miner
-In ikorodu axis go to.. Bayeku area.
-In ajah axis go to . Pump and sell bus stop OR Oke- ira

Anambra people’s ,thanks for your accommodation/ hospitality so far.

Work still in progress, update pics will be uploaded soon.

More

Pop still in progress... mainly on down section
To save cost we just screed the slab and introduce cornice to the angles.

Thenext:
Are you into installation of sachet water (pure water) purification set up?

Yes we do

44chux:
What treatment would you recommend for freshwater system in niger-delta [salinity is <750 microSiemens per centimetre
(µS/cm)]
How much do you estimate for a chlorine or ozone dosing system for freshwater with e. coli contamination
Location is Warri & Portharcourt

If your water salinity is <750 electrical conductivity test) mean it’s class 2 which is medium salinity.

Reverse osmosis (ozone) with 4-6 membrane with full set of fiber plant will solve the problem
This will cost you btw 1.5- 2.5m
Full setup

Badgers14:
What is maintenance like in this water filtration units?

The nature of your water from the source either from bore hole, well, stream, or municipal will determine the maintenance

If you have averagely good water with lesser ion content, it can only take you twice in a year to do the maintenance

Badgers14:
If someone already has borehole, tank stand etc..

What would be the approximate cost to install this water filtration equipment?

Here are another one done for diff member here
... about 5-6years ago through Hajji mufutau.

1st one in ikeja gra
The second one in ogun state

Badgers14:
If someone already has borehole, tank stand etc..

What would be the approximate cost to install this water filtration equipment?

Ones you have those mentioned
The only thing needed is the water filtration set up this depends on your.
- location.
- current state of your bore hole water.
- size of the building/ the occupant.
- type of water pump ( this is for the treatment plant only)

But something in region of 150k -450k

GM008:
Very Interesting, roughly how much will a complete filtered bore hole system cost in Sagamu if you guys were going to implement?
If I may ask, what are the blue cylinders for & how often will they be replaced?

I don’t know much bore will cost you in Shagamu but I know the area have diff soil nature this make the diff in cost.
The blue cylinder there is water treatment plant setup, it’s also available in stainless steel.
You don’t need to change the cylinder (it’s last longer)
The only things to change ones the you notice the water is due for services is the chemical content loaded inside it, this can come ones or trice in a year depends on the real nature of your water from the bore hole.

I believed I have answered your questions
More questions are welcome.

Tiling also loading...
Cost of tiles ONLY is 3.4m

Wall tiles Nigeria
Floor tiles Nigeria
Stair way tiles Italian

Watch for more details

PAPAFEELERS:
Please anyone with a cst estimate or information to share ontank scaffold?
i want to raise a 40ft tank scaffold using H Channel metals .
any headsup on cost estimation and important facts/areas i need to look out for or note.
many thanks all.
sample attached of what i am considering in doing.
CC: Rotech,Ne3xt, hajji. twinskenny , skimanski, abdulwastex, spyder , Egunmogaji, etc .

Prepare something in region of 750-850k
You also need to consider the foundation depth that will suits the scaffolding

GM008:
Is this something you guys do or can you put me contact with someone that can help with this?
Another question, can bore hole water be filtered to become drinkable?

The water can be treated for human consumption (the water will be taking to laboratory for test and certificate will be issue for if need be)
We have done many like that
Check the pic of the one we did for a member here in Ajax axis

Watch out for more

More coming soon

More Update progress pics coming soon

Jojo247:
Hello, where is this located? Thanks!

Somewhere in ikorodu.
Lagos state
Nigeria
West Africa.

AyeMaDaFunMi:
How much do think this same building can be completed to carcass for a client that would need to pay for materials at the normal market rate?

Thank you for your attention.

With the current rate of materials now
Something in region of 3-3.2m will do the carcass in well level and dry land.

AyeMaDaFunMi:
From your previous message in this post, it appears that the 2.5 budget to carcass is only for this specific client because they are able to purchase material cheaper.

If this is possible for any client, please correct me.

It’s can also be applicable to other clients who may have free access to cheaper supply of materials, since materials take largest part of construction work.

shogotermies:
Weldon at rotech77..
I enjoyed the thread.
You are a great man.

Thanks honorable chairman

kopell:
Rotimi safety safety, and safety moving forward the whole world is watching. The previous guy has just spoken my mind, what is the total cost of the entire building including all the finishing as seen?. It will help many people that have similar projects in mind to be prepared, this is a very cost effective project. I understand the plan is for office, if one decides to have similar designs as two bedrooms how many will each consist in similar size of this building?

Thanks so much sir

From foundations to carcass cost 2.5m

Now the finishing level demands by the client goes this way with cost.

-Window cost, both the bigger services window and the regular sizes cost =650,000
- burglary cost 120,000
- iron doors (2) 50,000
- stainless door 2)=500,000
- Steel stir ways 270,000

Still counting