₦airaland Forum

funken:
yes but from the US

Gbolahan111:
USA neatly used HP Pavilion x2 (Touchscreen)

Procesor: Intel Core i5
128GB SSD
4GB RAM memory
Cosmetics:8/10

Windows 10
Good for laptop and tablet mode

Price: 80k slightly negotiable

Call or Whatsapp me on Jeff- 08052682245
Location: Ikeja/Agege. Also, item can be waybill to any location

funken:
abeg show us the fangpusun way o.. abeg

Onlinealaba:
265watt

mamajj17:
Don't be dear, yr own go come! If u believe

Onlinealaba:
Has eco sensor and energy saver..on a very low power consumption rate

harizonal123:
Looks like A very good buy... 30k for 60A including shipping cost. I'm already making plans on how to get one. Our sellers here have been cutting our throat since 20AD

adrusa:
That is largely true and it is because many "dealers" here are just middle men trying to make a living on enthusiasts who don't want to go to the market. I almost paid for 300W flame solar panels here until my local installer got them for me from Alaba for about 10K lower. What they do is to advertise goods in other people's shops as their own. It is the reason why they also try to put people under pressure to pay fast as the "stock is small". I personally would have preferred that this place is reserved for hobbyists and enthusiasts while marketers and middle men set up their own thread.

ojeysky:
How about stand alone even if it means you've done car shield for your neighbors as well

Dam5reey:
Not worth it
180k for 80AH 12V

EnterPRO:
8 batteries? Was thinking 200ah x 2 max.

I have light for 10-12hrs daily and i won't be using all those items at the same time. Just 2 or 3 simultaneously.

What setup do you advise please? For the microwave and freezer especially.

Thanks.

Valto:
i bought mine(50amps)for less than 60k with the mppt control. i once bought a 24v battery balancer for 7k. certain things dont need to be order, especially when u need it immediately.. i bought all from trusted nairalanders.

Valto:
mppt 100/50...i have used Epever 30amps before, but fangpusun is more efficient. it comes with separate Meter for around 60k

ceaser:
You mean the wattmeter doesn't come on again, even when plugged into the mains?

ceaser:
The lithium cells are supposed to be recharged as you use the device with the mains. I think the only place you can get replacement will be online stores like AliExpress.

The wattmeter I use was not shipped with a battery as I am expected to buy a button cell into the battery compartment. I believe it probably requires a non-rechargeable type. But since I haven't even the luxury of time to start looking for the right battery size, I have been using it as it is. I think you can also use yours in that manner.

ceaser:
Those are rechargeable lithium button cells. 3 days ago, I burnt the 12vdc/12vac input/230VAC output sinometer I had by plugging it into a 220VAC socket. Two pieces had been lying fallow unused for about a year and both batteries were presumably discharged. I was able to rejuvenate the 220VAC input within seconds of plugging it into an AC socket while the 12VDC/12VAC input plugged into a 12vdc source only lighted the manual led but the LED screen wouldn't come on after about 30 minutes. I got impatient and decided to plug it into an AC socket and poof!

Now in hindsight, I should have simply removed the spot weld (it's possible to just do it like you would the 18650s) and use the 230VAC variant to charge it.

I will advice you just get a sharp long nose plier to pry the nickel contact off the battery, it's a 1.2volt nominal button cell which is totally discharged so I think you shouldn't worry about any fire hazard associated with the lithium chemistry shytes. Get a rechargeable replacement and just solder it (in the absence of a spot welder).

CHUPEZ123:
1.5kva generator set for in good working condition. Well maintained no issues
Price: 30k

ceaser:
I use a 20amps version of that charger. Been doing well for about a year now.

wildchild1:
With Clone anything is possible

Rollsnjaguar:
contact me

harizonal123:
My pv are wired in parallel 12v 500w.

Never heard we have AC and DC breakers. Seems the one I connected is an ac breaker. Pls can u show me a picture of A DC breaker and where to order it online. Someone suggested that I should use the 100amps breaker to serve as a switch during maintenance of the panels and to serve as thunder arrestor.
Below are pictures of my breaker installed that seems faulty and the 100amps I just bought.
Pls I'm a novice in this field & I did all these setup by my self. Thanks for your explanations