He who put smiles on peoples' faces, smiles will never depart from his life too.

kunssat:

Guys in dis forum, pls who are these bloggers that wants to render all our satellite decoders useless, look now T8 Ultra has refuse to autoroll Sony, Strong decoder No Specific progress, Qsat NO report any more, let's not talk about other decoders, & many others, also no more decoder to open Sp24, Now we Guys have to "LAUNCH WAR “ against these people b\4 any other hazardous thing happen OOOO....

You are spot on brother. Some of the so called bloggers are very stubborn and would never listen to any credible advice as they are always seeking for attention

rapthugx:



Please is there any good thing about this bird again?

Correct my brother. Seems 16e is now mainly for French speaking people.

Chazsally:

Interested sir! 08068075118. Thanks in advance

Interested, please connect me at 08030432469

[quote author=ManirBK post=72544748][/quote]
@Sunene 1 and other gurus, pls give me the details of 11w on my WhatsApp 08030432469

tossie101:


we don't need their support they are inconsequential, we only want them to focus on their own

Major and politically sophisticated tribe is inconsequential abi, I dey laugh o!

Please I need latest software for tiger t8hd decoder

sunene1:
House,their is a fresh info I got from sat gurus in Jos that our 9boys has migrated to KU.4 of their channels are on board now with 1.8m dish in Jos .But 2.4m or above outside jos u can follow me on watshaap to get the details if u are interested.

Pls connect me up WhatsApp 08030432469

Lunsat:


The difference is the 5/6 and 3/4. These are called FEC values or forward error correction values. The data transmission language has an error correction key built into the data which allows the decoder to detect when some data has been lost on the way and guess what that date was and replace it without asking the source. This technique us useful in one way transmission systems. I don't know what logic goes into choosing 5/6 or 3/4 but from the receiving end I know that signals with bigger FEC values like 5/6 tend to be weaker and harder for decoders to lock than smaller ones like 1/2.

Correct!. FEC value of 5/6 is weaker than 3/4, it also need bigger dish for the decoder to nail.

david0bed:
In Delta State, the Orugun people... They don't kill this animal, it's sacred.

You people are missing a lot, its one of the delicious bush meats!

Evablizin:



I know, Buhari is evil,his brothers should establish their colony in Sokoto,Sahara desert and Kano.

If they are sincere, let them take their fulani colononies to Sambisa forest where is massive land and grass for their cows.!!!

simonnkhoma:


At my end colors and Sports 24 signal is there but with a tp of 4096 H 30000. Tried the keys didn't work!

No key is working for sport 24 for now!

sduni47:

Clarence peter mama, dnt be scared

Wrong information as she is not Clarence Peters mama. Ace Actress Clarion Chukwura is Clarence Peters mother

paulowas:

ok,use recovery boot system to uprade it:ensure your fashdrive is free of virus,put the software in tne flash,this time around only the software should be in the flash,switch off the receiver and attach the flash to the receiver,on the receiver while holding one of the channel buttons in front of the the receiver,as soon as you see( ----- )in front of the led display,release the channel button,thats all!
Note;make sure you rename the software(rom.bin).

Thanks for your response as usual. I have tried this option of 'recovery boot system to upgrade' too but it is not working and I think maybe because the decoder is not a dead one already. Each time I tried the upgrade via this option of "rom.bin", the decoder will just reboot normally without recognizing it, and I have tried it severally but no way, so is there any other way out?

oselydia:
Even with the makeup, she still isn't beautiful

When God says "you are beautiful" who is that human being that would say you are not. Can't you see the "Hand of Almighty God" in her life? I also pray for the "Hand of God" in my life and other well wishers all over the world, Amen.

paulowas:

Downgrade it to an older software ,before upgrading it.

Thanks. I have done as you said but there is still no solution yet! I downgraded the srt 4950H to to even much lower version - 3.20p which it did successfully but when I wanted to do the upgrade to the latest software (3.16p) it started displaying "file size error" again and refused load so any way out?

Pls gurus in the house, how do I solve the problem of software upgrading on my Strong SRT 4950H as it keeps on displaying "file size error" whenever I want to upgrade; I have done factory re-set, used many [b]new [/b]flash drive but no way. So my people, my people what is the way out?

Pls, how do I solve the problem of software loading on my Strong Srt 4950h, it keeps on displaying "file size error" whenever I want to do software upgrade and it will not load it. I have done factory resetting, used new flash etc. but no way, so what is the way out?

deji47:

Pls how much did you get your card?

The card is an old mytv card which I got for my 4669 in 2011 for N1,500

graphicicon:
@Truly1, my own did not take up to 15 seconds before opening, properly insert the card, am very sure it will work

Pls guide me on the card insertion. How would I know that it is properly inserted?

graphicicon:
@Kudos4u, it will work if the decoder has conax smart card reader, but u must activated the card with any strong HD reciever before before putting it on Qsat, i have done it with Qsat q11g and it worked.

Pls how did u go about it cos my own refused to work on Q11g or do you leave it there to hours before it start showing. The card is working well on my SRT 4950h.

barak1:
Pls which of the powervu's receiver is less expensive and works perfectly need it for sports 24.location is ghana

Get for yourself Viewsat HD decoder and you are good to go.

@Emmachile, Chinedu7 & other gurus of Chinese decoders, pls how do I put Biss Keys in Viewsat 4950hd decoder?

[quote author=baggiosne post=51740491]get viewsat HD
Pls show me how to access patch for keys area in Viewsat HD, I know that of Qsat is 1512, what is the code for Viewsat HD?

Pls house, how do we access keys, add tp, move and delete channels on Viewsat 4950hd.

Pls house, I need autoroll software for Viewsat vrt 4950hd

Pls house, a friend need the address at Alaba, Oshodi etc in Lagos where he can get Dsat, Vinsat & Viewsat decoders.

Eldorado382:
not dat i didn‘t try it b4 coming here but bc d more i try it d more it becomes troublesome. It shows invalid input up to 20 times & i resort to come here

Insert your card into the decoder, then go online with your phone or computer to complete the card registration process, but ensure you are on one of the ftv channels like, WAP tv, AIT, channels etc., after completing the process, it will show you activation success at the bottom of your phone or computer, then wait for some minutes b4 the channel comes up, if it doesn't, alternate the channels within the same group of ftv.

patriotic9jaboy:
Their marriage will soon crash

What a wicked statement! Better pray for forgiveness.

kudos4u:
what's your Email address so that I can send you the fake patch. Samething also happened to me last week and someone send me the patch and that's what I use to wake mine. It's just that when I switch it on now, it doesn't show the startup logo anymore (strong or mytv) but it's working fine.

Thanks for offering to assist a brother in need, that's what this forum is all about, pls keep it up. Viva FTA!

yawwilson:
Hello wonderful friends, I will always recommend the strong decoder (4950H/E) to anyone looking for a good decoder to buy, first of all this decoder seems to be a little complex when it first came out with the original UI.
Anyway the 4950h has numerous cams, including Avatar cams There is also one full year free ccam working and since strong made 4950H ahead of its time, the software developers have promised an aggressive software upgrades .The only setback here is that people sometimes conceive minds to the contrary even before having a critical analysis of the box. I have worked with Qsat. Alpha box,..... and they are not equal to strong more so for 4922, I will rather say in terms of Android, 4922 is Kit Kat whiles 4950h is Mashmellon.... So long folks!!!

You are spot on brother. SRT 4950h is on its own class, you cannot even compare its colour with 4922a, but the 4922 series is popular with installers because of the simplicity of its operation.

ben1daEbiri:
Come on man!I'm not blabbing,make your finds and report back,All MBC packages beamed outside Nilesat doesn't last;specifically that of badr,it comes on and off!

You are perfectly spot on brother, infact the last time MBC showed up on Badr 6/7 @26e it was tagged MBC HD then. So my thinking is that they may not last there too, based on their antecedent and you cannot even get programme schedule on your remote EPG for MBC @26e