₦airaland Forum

Well done Spyder
Always impressed with your work and I am sure the client is too.


If I might ask, I had thought pools are built with reinforced concrete both walls and floor and drain pipes/electrical pipes are laid all under the reinforcement before casting. I am really surprised to see only concrete blinding and use of sancrete blocks. (All my small knowledge from watching pool kings)

But I am watching sha to learn.

Well done.

spyder880:
Our plan is to slope this swimming pool from the shallow end to the deep end. The shallow end will be 1 metre deep, while the deep end will be 2 metres deep.

This swimming pool as at now is 6.2 metres in length, and 2.9 metres wide. But it will get narrower as we do more work on it.

I used his screed paste recently and when I ran out I ordered from Caplux. Nearly same quality. I also used a few outside too. Still withstanding the rain so far. Both better than cement mix for me.

Tport is the only issue with Gbadexy's products. But I like his paints too

spyder880:
I must be frank with you, if not for distance and our difficult transportation situation, plus cost considerations, I will love to order your products and use on a building here in the East.

I have heard a lot about the high quality of your paints and POP paste and everyone cannot be wrong at the same time. You are also an encyclopedia where paints and resins are, so I am sure you know your work very well and your paints will be very durable. But we must work together soon, my use of Sharon is just because they are close and have depots all around the East for easier ordering and fast delivery.

DFAMEGUY11S:
good morning sir pls what do you meaning by this your statement i didn't get you sir

I meant well.
I meant these products are so tempting and I shall not fall for them till I can afford them.
Meant to be complimentary.

DFAMEGUY11S:
https://www.nairaland.com/5349336/executive-toilet-seat-shawer-room

https://www.nairaland.com/6609728/osinachiadima-global-enterprise

I shall not fall into temptation.

Hello Sir
I observed that you market quite a number of different brands of inverters.
Don't you think that makes the choice by customers more difficult?
Are there quality inverters with better warranty than others?
I used a 1.5kva inverter at some point but its the batteries that have continued to pack up. They last about a year.
The only solar system so far that has barely lasted for us is at the office where we used more panels (8 or so) with only 2 batteries as the offices close by 530-6pm.

So how can one know the cost effective battery brand(s)? Educate us on that.

kiekie1:
Quit staring & order yours now!!

Reach me now for durable 24v pure sinewave system below...
Last prices :

Schneider 1.5kva ........ 78k
Signal / index 2kva ...... 95k
Signal 2.5kva ... 120k

Smartcell_Nuggets: One of the most exciting opportunities created by renewable energy technologies like solar is the ability to help the world's poorest develop faster - but more sustainably too. - Ed Davey

Contact,
Smartcell global services
CALL ONLY:: 081-350-31951
WHATSAPP ONLY::: http://.us/w/?c=a46ea5

Please does this proposed process make economic and aesthetic sense with the increase in cost of paint...
Prime the screeded wall with two coats of emulsion with intermittent sandpapering and then apply one coat of satin.
I ask to know if dodging two coats of satin makes any sense.

gbadexy:
Screeding is done to give a smooth and soft layer on a plaster surface and it can be further sandpapered to give a smooth finish that regular cement plaster can't give.
If you don't screed, nothing would happen as long as you aren't using paint with sheen but if you use correct matte with low sheen or silk and you don't screed or at least prime it to smoothen the surface, the reflection of light on the wall surface would highlight the roughness and other faults on the surface.

I think I agree with you based on my experience. Base coat ready mix putty hasnt shown any sign of peeling or cracking but the cement screed used to round up the work has peeled on exposure to weather. 4 months now

gbadexy:
Most part of my experience comes from feedback from my painters and screeders who are actually on the field and encounter various challenges.
My main screeder told me he doesn't like working with or building screeded with portland cement ( grey cement).
He said after a couple of years, they tend to peel and fall off. They have tendency to crack also, especially if cheaply done with little p.v.a binder added. If sufficient extra binder is used, it would be better but then how is that much different from the basecoat. Only the filler in basecoat is replaced with little cement as the pop emulsion used to mix it also has basecoat filler.
Cement needs proper hydration and certain thickness and with cement, pop emulsion and whateverbond, it would be applied light and I suspect dry fast without sufficient time to hydrate.
Besides, I've stated it here severally that cement forms a chemical reaction with sand (silica) by gelling them. Both on the block surface and the plaster mix and they don't form any reaction with calcium carbonate in pop emulsion used to mix them. They just act as a further inert filler with the calcium carbonate in such capacity.
It may hydrate itself and harden somewhat but there is little interaction with the pop emulsion used to mix it. The only thing holding it to the wall is the pva bond added and the amount used would determine the strength.
I posted a building that was screeded close to six years before the owner decided to paint it as it was white and looked painted and was used as a reference point in the area ( white house).
Perhaps p.o.p experts and screeders can shed more light to say if they have ever encountered basecoat cracking. It's what oyinbo people use in screeding!

rotecch77:
Yes it’s double sheet

The thickness of sheet A is about 13mm same as B

Thanks

Jeff68:
I just did HDF Doors for all the interior doors in my build hoping they last ooo!

i

Please how was it made?
Double hdf sheet or single?

Please is it double sheet?
If yes which thickness?
Very nice looking doors

rotecch77:
HDF door are very good also, just make sure you sub-frame wood is perfectly done, then you are good to go.
See the attached pics of the resent one that i used for my new office,very heavy and strong
Total cost about 70k

Please restate it again with pictures, logistics and figures if you dont mind

Jasobry:
I have stated it here before, all my doors are solid timber from bakassi. With a good finish

Please why are we not also discussing the use of HDF double sheet as hardwood alternative for internal room doors?
A handful of people use them and so far I have not heard any bad news.

What do you think guys? I use style dey consider am ooo

@diodarves
@Kolashangone
@next
@true2home
@Egunmogaji

Please which location in Enugu.
Address and number.

kopell:
Bros if I tell you some of these wooden doors you see in home depot are made in Enugu you won’t believe me abi. It’s amazing me when I watch only for export wooden products on one of Nigeria tv program few years ago. If you’re interested please watch bank of Industry program on channel tv, you be surprised many of these products are produced in Nigeria. Matter fact there is another Company producing standard wooden door in Mowe close to 15 years display them as imported doors. I’ll look for link and post here for everyone to see.
https://www.youtube.com/watch?v=OKs1hSOufWs

GAZZUZZ:
This is available.

08033910382

ok

Do you have 10w-30 in stock? Its for Toyota 28 seater bus

rotecch77:
Yes it’s locally made.
Double laminated HDF board with solid key .... very heavy door.

Please what is that trim in the middle and where can one get it?
What is the thickness of each hdf sheet used for the door?

boyestick:
House,Please what is the cheapest way to screed exterior of a duplex and cost implication ?thanks in advance.

Option 1.

Paint with a primer emulsion paint. Sandpaper after drying. Won't be very smooth but a very cheap method.

Option 2. Buy and use ready mix screed putty white color. @Gbadexy can help you with this. Its better and cheaper than mixing ones

#myExperienceAndOpinion

dongc:
I do watch a guy called mike farrington on YouTube building cabinets,tv stands or shelves....Man's tools and attention to details and descriptions of what he is doing.....finish products comes out wow....

k

You may also watch the guy called VITTEN.
His design and details are super nice too

spyder880:
Try this my customer.

Will take note of this address if I go to Ogidi.
I have once used your referral ( electrical at Kenyatta). Good guy then... Oforma or so

ceelog:
Greetings all...

I am about to transact some business with @Chizagi for some bath doors *Double panel American doors* purported to have a high water resistant ability.

I am starting with bath doors and if all goes well as he promised and he delivers just before this weekend, then more business and more clients may come his way.

He is transporting them from Lagos to Orlu at an agreed price.

I hope he gets a thumbs up from me and I shall return to tell you of the transaction later.

Una well done ooo

@spyder880
@diodarves
@mufutua
@next
@Goodfaith
Etc...

Update.

The proposed transaction with @chizagi couldn't go ahead as planned. He could not assure the delivery time for the doors as requested as the delivery van said they could have delays.
I would not be around again to receive doors if the lead time was too variable.
So the deal has been suspended for now.
I might just have to source for the doors close by eg Onitsha

@spyder880 please any contact for me at Ogidi market?

spyder880:
I will be watching too, please give us an update when he delivers. Good luck to all of us.

Trust me I shall.

n3xt:
Wishing you all the best! Thanks for the update.

You are welcome @next
I think stating the transactions before might put all in check before we begin fight after.

I hope @chizagi comments too and possibly give as much information he wishes to give out.

chizagi:
My name is Michael, i am the marketing manager of Amak doors Nigeria Ltd. we are your dependable home for top quality and affordable steel, wooden, armored, turkey, kitchen, stainless steel glass, bathroom doors.
call us today for supplies and installation services and you will be glad you did.

Regular steel door 3 feet: N30,000
Regular steel door 4 feet: N54,000
Standard Turkey door 3 feet: N78,000
Standard Turkey door 4 feet: N108,000
Wooden door : N32,000
Hard wooden door : N78,000
American Panel door : N25,000

Greetings all...

I am about to transact some business with @Chizagi for some bath doors *Double panel American doors* purported to have a high water resistant ability.

I am starting with bath doors and if all goes well as he promised and he delivers just before this weekend, then more business and more clients may come his way.

He is transporting them from Lagos to Orlu at an agreed price.

I hope he gets a thumbs up from me and I shall return to tell you of the transaction later.

Una well done ooo

@spyder880
@diodarves
@mufutua
@next
@Goodfaith
Etc...

Greetings all...

I am about to transact some business with @Chizagi for some bath doors *Double panel American doors* purported to have a high water resistant ability.

I am starting with bath doors and if all goes well as he promised and he delivers just before this weekend, then more business and more clients may come his way.

He is transporting them from Lagos to Orlu at an agreed price.

I hope he gets a thumbs up from me and I shall return to tell you of the transaction later.

Una well done ooo

@spyder880
@diodarves
@mufutua
@next
@Goodfaith
Etc...

chizagi:
I wish to take total responsibility for the varience in design for the doors i supplied to @3him3n, this is a mistake, an avoidable mistake. I promise to do better next time, to ensure that the exact design requested is the exact design supplied. I also want to request that in the spirit of one love that @3him3n deletes the initial post with details of the transaction.

Thanks to everyone that showed concern and made effort to resolve this matter, God bless us all.

Putting some trust in you now.

Greetings all...

I am about to transact some business with @Chizagi for some bath doors *Double panel American doors* purported to have a high water resistant ability.

I am starting with bath doors and if all goes well as he promised and he delivers just before this weekend, then more business and more clients may come his way.

He is transporting them from Lagos to Orlu at an agreed price.

I hope he gets a thumbs up from me and I shall return to tell you of the transaction later.

Una well done ooo

@spyder880
@diodarves
@mufutua
@next
@Goodfaith
Etc...

You have nice wall papers bros.
Please show samples of kid friendly wall papers for bedrooms. What is the size per roll again?

michlins:
get a filing machine and use iron brush to brush off those then repaint

You mean paint the entire door again?
It has different colors and not one type.
Or do you mean paint with gloss?

Please experts how does one remove dried mortar from a metal door? and what's the most effective way to clean your tiles after screed and painting?
Spyder880
Next
Diodarves
Dominionng etc...

How much are these doors now.

The first one and the kitchen glass door?

Rushtec:
Turkish made Hard wood interior doors

Posted on 17.07.19

These door comes with full keys, frame and accessories. Just buy and install

Whatsapp 08169498907 for price

Send mail to Rushtecm@gmail.com

Jasobry:
I'm trying to put up something different from the conventional bricks... Using broken Spanish or China floor tiles,cut into bricks sizes for my pillars.. I chose black with gold effects.. using white coloured pigments cement. Hope it comes out well

Please do share the image of the idea and the outcome.
Won't it look like the normal brick tiles people use for pillars?
I am interested in cobble stones it does not seem to be used much around the East

chizagi:
ok, you can use American panel for the bathroom, or you can also use original turkey pvc door for bathroom. my own original american panel door is 23k, while the original turkey pvc door is 49k

Please post pictures and do you have any pick up point in Orlu?