₦airaland Forum

Bejusttoall:
Good evening all.
Please I need a QS in Ibadan who will partner with me on bidding for contract

@QSFemi

megacontrol:
Hello guys,

Different PoP cement brands below in the market based on availability;
- Arkim
- Portman
- Nejma
- Diamondgips

------

PoP Paint
- Contractor
- Glova
- Risen

which comes more recommended?

Thanks

Glova / Delight

Good evening Ya'all.

Kindly take your time & check my Thread.


https://www.nairaland.com/6534100/interior-design-project/2#105749655



We add values to our clients Project.....

Hello y'all.

Process for Screeding a rough wall/fence



If your wall/fence has been painted and it's Peeling off or it grows some unwanted Plants.


To ensure a quality Screeding do the following.

Wall must be Properly Scraped clean.
Mix cement with Pop Screeding Paint & Top Bond gum or factory Produced gum.
Mix to achieve a thick & quality solution (Do not mange materials especially for a very ugly & rough wall or fence.)
After Proper Screeding, leave dry for 2days, then sand paper to achieve more Smoothness.




NB: in Screeding, Black cement is the same thing with (Dangote/BUA/other regular cement).



Recommendations; Use POP cement for interior wall Screeding, Use Black cement for exterior (Fence/wall).

Use Factory Produced Gum in Mixing your solution.


Please Note: The above recommendations are based on my experience & Research. (Feel free to try your own way).

n3xt:
RHD - Right Hand Drive
LHD - Left Hand Drive

Thanks bro

seunpinky:
I remember that thread... You talked about importing the car for personal use from UK and something with converting it from RHD to LHD.

Please what's the bolded?

Focusmind:
Correct guy! Simple and neat. I did this in one of my rooms.

Thank you ❤️ Chairman.

Oni POP yin ti de ooo (Plaster of Paris) installation.

https://www.nairaland.com/6534100/interior-design-project#101307210


Call or WhatsApp : 09122348437

N

somehow:
We were previously setting 'rates' on nothing.

There was no economic reason for having a 'strong' naira for about 30 years in this country.

If market forces are to determine the actual value of the naira, we should be exchanging $1 to about ₦1250+.

On what ground should naira be even worth ₦520/$1?

So all the rates you had before now were mere cooked value and even as we have it, it's still not a true reflection of the value of the naira.

I understand the country's economic situation has become worse.


But a further devaluation would mean disaster to our Naira.

Imagine if we were to exchange naira at ₦1250!!

Absurd

Chaos.

I just pray we don't get to that level , sincerely I really wish for lasting solution to this Problem.

People are suffering.


it's high time we start to support “Made in Nigeria Products”

n3xt:
Simple Internal Doors by NextHome

How much does it cost?

rmx:
Summary is we have balance of payment deficit as a nation

Total imports are more than total exports

Solution , be more productive as a nation , add more value to what we export , reduce unnecessary imports and have a sensible birth rate as a nation . Simple


Thanks,
Can search for a detailed post I made last year

Thanks!

This helps in a simple form

We're available For interior POP works..




https://www.nairaland.com/6534100/interior-design-project#101307210

Ramon92:
what's the current estimate for pop for ceiling 6x4 asbestos size room?

That should be a 24sqm room.

Just budget ₦100 - ₦120K

erico2k2:
E chock you? £ is N732 today!

E no too shock me! But really annoying.

There must be some sort of solution to it.

Economist or financial experts should be able to explain better

Jasobry:
Update on my kobo kobo project..

Nice house ✓
But
This one no be Kobo Kobo Project oo

emeritus007:
Bro, I was able to reach 120k with the guy.
What are the the key things that must be ensured for quality work?

To ensure a quality Pop job.

1 Casting process must take place on a clean & oily wooden /glass/ metal board.

2 Pop Boards must be Casted Properly using quality amount of fillas which determines the strength of P0P.

3 casted boards must be kept dry before hanging (dry boards becomes stronger)

4 wooden platform must be straight to avoid creating warped board.

5 mould must be mixed properly to achieve better solutions.

6 boards must be cut Accurately to fit in smaller dimensions.

7 During the hanging Process, a lot of concentration is required to achieve a better design & perfect fit.

8 Lining must be straight (Lining is achieved using a white lining rope & a black cement. Nails would be placed on the straight line to hold & support the First set of hanging)

emeritus007:
Okay, thank you very much

You're welcome

.

Media Panel (Created with POP)

Good Morning to our Potential clients.

spyder880:
Some imported doors I was considering buying yesterday.

#Pic 2 .... is really Nice

emeritus007:
Someone gave me a quotation of N99,400 for materials and 40k for workmanship. 139k in total...fear catch me

Like i said earlier, Price of materials in your Location would determine.
Negotiate with the Person, Be Concerned with Quality of the Job.

Beat the Price down to ₦120 - 125K.

emeritus007:
Good evening everyone.
Please how much will it cost to do POP ceiling for a 24 square meters room?
Location is Nasarawa state

Budget ₦100K for everything.

NB: subject to change depending on the price of materials in your Location.

twinskenny:
last week exchange rate 505 this week 525

I'd love to learn about some explanation & solutions to these crazy dollar rate increase & devaluation of our naira by an Expert.

Any Economist in the house!!!


This is becoming rather annoying.

diordaves:
Na lso Pako for countries with Public Health system. We no get functional Public Health system for Nigeria so our Iso Pako na potor potor full am and open gutter without coverts.

Just imagine how neat..... That iso Pako is. Chai

michlins:
I'm sorry for not responding quicker. I haven't received those as the benefactor has been stuck abroad due to COVID-19. He was recently diagnosed with the disease and that disrupted his travel arrangements. Once he makes it available, I will let you know

No Probs! Then.

rotecch77:
You are very correct chief, a year ago I branch at ijebu ode while coming from ondo area with my client to check good plank that is very close to the site.
Yes we got it with good rate according to the standard of the wood we got there” not regular cheap plank” all sizes are ACCURATELY CUT and stock in that man stand.
Yes I was happy bcs i knew we will get it there.
But the rest is history, my cleint said chief we can’t use this plank I said why oga,……he said don’t I see that the money is much.
Case close.
We later went and bought regular mama iyabo plank.
So it’s boils down to cleint and individual pocket.
80pec are not ready to buy.
Now tell me how will this encourage the seller and others seller to open more store when whey have low patronages.

Good Point. Like I said earlier, a lot of Nigerians are not ready to pay for quality.

diordaves:
First photo: iso Pako Sheffield UK.

Second photo: iso Pako South Africa. South Africa that we think we are better than o.

Can you see how straight and to size the cuts are? Only in Nigeria will you pass a straight cut wood as premium. In "ordinary" South Africa it is the norm.

There's truly something about us as a Nation.

These places are too neat sef.

Are you sure, these places are Iso Pako because e too clean oo

EgunMogaji2:
I finally understood why people buy Tokunbo instead of new stuff in Nigeria. Everything is upside down.

As I have heard: it's said that Tokunbo Products works better & lasts longer than New.

#itsA~NigerianThing

EgunMogaji2:
Local man just cannot can

But I’m sure there’s a method to this madness.

There should be some sort of chemicals that can wipe this off