₦airaland Forum

bastien:
don’t think it’s from the belt, 3 seconds krrrr

Is it the 3 seconds krrrr?

bbeckky:
These are the codes bro....
P0141, P0100, P2271, P2187, P0138, P0140, P0113, U0155, U0146

Clear codes, drive for some days and rescan again.

StoriesUpdate:
Tension as First Lady of Kogi state. Mrs Rashida Yahaya Bello spotted driving herself to the gym 


https://www.youtube.com/watch?v=_qyxCeH3EwY

Mrs Bello in her Abuja residence, was seen cruising in 2022 Mercedes Maybach worth millions of Naira.
The interior is giving everything luxury… @rashidayahayabello

If not for insensitivity to the plight of her people, why would a wife of a sitting governor drive a 2022 model Maybach and her husbands subject are wallowing in pains and hunger and poverty even as floods are ravaging their communities

Bostin:
400k can pick tomorrow

system000001:
500k

Oya because of una, make una bring 800k now

Selling cheaper compared to most out there.
Happy sales sir!

Selling cheaper compared to most out there.
Happy sales sir!

May God do only what he can do, may his perfect will prevail and may he bear all the glory, and may you and everybody related to your dad find peace in their hearts at the end.

Amen.

Woholo Itaf Dey o!
Where una go find this kind thread?

shuri:
Baba kingreign , I hail sir.

My 2008 Acura MDX engine starts when I press and hold the lock button for 3 seconds. Then it has another remote/fob that performs the same function (starts and off the engine) when I press and hold the number 2 button; the button above the unlock button (picture attached). Can I engage the transmission and drive the box this way? I haven't tried it , just curious.

Is the key fob a genuine stock keyfob?
If yes, I doubt you’d be able to drive off with a remote start. If it’s aftermarket, it may allow you if it’s programme to behave that way.

vivalavida:
Good day bro. I drive an acura tsx 2008 model. I have this check engine light on. I have scanned with my Bluetooth scanner but it tells me no OBD fault found. I have an increased fuel consumption.
I proceeded to do a smog check and I am seeing a pending code there but it has refused to show me the pending code. I want to share the result of the smog check. I pray you and other technicians in the house can tell me how to go about tackling it from there.
@autoelectng, please come in too.

Get a proper scan tool and scan that car, then post codes. If you’re in abuja contact me 07034581213

rollout40:
Good day bro, My mum's 2007 corolla has been serviced by her mechanic with 20w-50 for over 5 years. Recently the low oil pressure light came on. He said he has cleaned the oil filter under the engine, changed the oil light switch, cleaned the engine of sludge and tried about three different oil pumps (1 brand new and 2 tokunbo) yet the light has refused to go off. What's your advice?

Is the wiring of the engine oil light indicator good?
If yes, then you may have sludge in that engine.

If it is sludge, prepare for another engine.

pocohantas:
I mean, did you upgrade your own flat?

Old buildings are also in demand because of space. I love old buildings - not dilapidated ones o. Old buildings have bigger rooms and two windows. When landlords knew tenants are supposed to breathe well inside house.

I doubt there is anything you can do to him. If you move out, those boys with slippers and cross bags would enter. They have left Island. They are now moving to that your Egbeda.

bastien:
Greetings boss, my Lexus es350 makes a loud squeaking sound early morning start, this happen recently, what could be the cause and solution sir

Is it from the belt or a 3seconds ‘Krrrrrr’ sound?

nitt:
You're most welcome.

Sad about your response. Lol

Going forward, will share any issues with the car proving a bit difficult for the average joe.

Thanks again & have a great day.

Thanks and have a great day too!

zotorux:
Thank you, I just meet up with a technician and we realized the fuel pump used was even manipulated. It’s not for the car itself. So I’m changing it alongside some components. Hopefully it works out.

Okay.

OfficialDJ:
enjoy your Toyota And infinity jalopies in peace or pieces and stop gallivanting car talk with ridiculous assertions.


One wonders why he hasn't seen a Lexus truck yet...
Beemers are luxury cars, not your Japanese shitty contraptions.

K

vladhillz:
yeah?

Get the key reprogrammed to the car again.

zotorux:
Good morning nice work here. So I just got an accord 2008 (my first car) so I’m new to all this.
I just noticed that once the AC is turned on there’s this extra noise, like something grinding can’t really explain. My car plus said is from the steering pump. Would love to know more about that. Thank you.

Have a technician check and verify if it’s from the power steering pump or any of the idlers or pulley.
Take off the belt and roll them individually and also feel them for rough points.

vladhillz:
its on and steady when in on position

When the lights are illuminated on the dash?

vladhillz:
its seems like,,a red car symbol with key on it

Yes

vladhillz:
Good morning
I had an alternator changed on my nissan quest 2008 base model yesterday and after installing,car suddenly refused to start,.when key is turned to the on position,dashboard light comes on,with the fan blowing and head light on,when they tried to crank,nothing happens..they have no idea what is wrong.this was suppose to be a simple alternator change.please help me out here boss..

Does the immobilizer/anti theft security warning light blink when key is inserted in the ignition and turned to the on position?

nitt:
@kingreign hell of an assistance you are offering to millions of car users. More growth to you.

I am currently based in zaria/Kaduna & I'd like my car checked by someone as good as you within that axis. Would have loved it be you but FCT is a long drive & time is not my friend at the moment.

Do you know anyone you can connect me with?

Thank you very much for your kind words, this means a lot to me. I appreciate.
As for your request, unfortunately, I don’t know any one in your axis that I can recommend.

ManAdii:
Please what's the cost of quality repainting of 2008 Honda accord?

Your location pls?

alaricsaltzman:
Thank you very much.

I'm in Lagos. Can you recommend someone in Lagos?

Also, is it a job for a rewire or a gear master?

Gazzuzz,

+234 803 391 0382

You need to book an appointment with him

alaricsaltzman:
How can I resolve a Toyota corolla 2009 with P0717 error code - Input/turbine speed sensor.

Car sometimes jerks before changing gear from 1 to 2 and 2 to 3.

And it doesn't enter gear 4.

You need to carry out physical checks on the wiring on the transmission. There are two sensors on top the transmission and it has two wires each which plugs into the sensors via sockets. Have a multimeter and read the conductivity of the wires. If it registers, it’s fine. Proceed to the sensor and check the resistivity of the sensor any reading outside 60-680 Ohms range, you replace the sensor.

It’s more of a professional job and less of a DIY job.

If you’re in Abuja and environ, do contact me to fix it.

symbianDON:
ok. Thanks so much. I really appreciate this.

You may also wish to check the spool valve.
From some quarters (unverified by me), it can cause misfires.

symbianDON:
yes!! I have done all that; swapped/changed coils, replaced all plugs and replaced injectors...yet the result remains same. I forgot to add that timing belt was replaced too some time ago.

Carry out compression tests, and leak test on that car pls.

That said, the J35Z2 with VCM are known for their damaging Sparkplugs due to the VCM operation and this may in-turn damage the engines

Lexusgs430:
Nobody got monopoly over vawulence.........

Ding dong ........

Vawulence is too much!

symbianDON:
the last repair job was noozle and coil replacement. Car hasn't had any flood issues.

Did you swap coils from 1,2 into 3 &4 to test?
If you did and the result stays same, try injectors swap too. Also, do check the Sparkplugs and let me know the result.

symbianDON:
kingreign please kindly help out as much as you can; I won't mind calling you on phone or sending whatsapp messages if you permit. Here's the case with my car: 2008 Accord V6, location outside Lagos. Car started misfiring on 2 cylinders (cylinders 2 & 4). Sparks plugs were changed for all cylinders, no change. Ignition coils were replaced, no improvement. Injector nozzles were replaced, fault codes change to cylinders 5 & 6! Nozzles were replaced at 5 & 6, misfire reduced for a few minutes and starts again. At this point, the following symptoms are presented: cylinder misfires, hard starting after car runs for a short distance, strong smell of petrol in the car, howling sound from the silencer (I guess unburnt fuel is getting into the exhaust directly and burning there), knocking sound from the engine after a while (not continuous), very crazy fuel consumption, engine revs itself after 2 minutes of starting up, flashing CEL. Curiously, the only codes that come up are for cylinder misfire! I'm at my wits end!

Sorry you’re going thru this crazy experience.
Let’s start from the basics, what was the last repair job done on the car that caused this to happen or did the car suddenly decide to have automobile madness and rabies on its own?

Did the car swim or did an electrical short circuit occurred?

Imagine how Nigerians behave like like deranged hoodlums when they go abroad and then the host country authorities enact stricter rules against Nigerians willing to go abroad.

Rip to the deceased!

Conner44:
In the pictures below, to me oh . . . The only thing that the Volkswagen used in defeating the bmw is that the needle and dials had a different tone of colors if not they are the same thing

Maybe it’s just me but I hate the use of the same color of led bulbs on more than 90% of the instrument cluster lighting except it’s in white

Blue backlit dash are horrible and distracting at night, yet VW used it. So, did they not researched before implementing these things?

One of the best lights to have in a dashboard is diffused white lights. It is aesthetically pleasing and easy on the eyes and when brightness levels are adjusted accordingly, it driver can read all he needs to read easily and quickly both in day and night driving times.