₦airaland Forum

Rhyah:
Thank you. Pls can you mention the seller's moniker or a link to the page where it was advertised. Thanks

Janyves:
Oga Niyi, you're right. With my little experience with xformer based inverters, I'm yet to see any idle power below 14W(12v) , 21W(24v), 28w(48v). But I've seen hungry one's ∼48W(12v), 108W(24v) ,192W(48v).

mobolaji234:
Please guys I need help choosing between a Benz c180 and camry 04-05 (big daddy) 2.5l engine.
In terms of ruggedity, fuel economy and less visitation to mechanic workshop

Thank you

ayubaski:
lake kivu has berth

osy77:
Bros anything u do...I will advise u use sikkens and let Lagos boy do the job...thank me later

Rhyah:
Please advise...

I had wanted to get a Luminous Delite package which consists of
* a 900VA/12V inverter
* a 150Ah/12V tubular
* a trolley(rack)

As at when I made my research/reviews about this package, it was #99k...Though I was down due to high financial commitments at the time but was still going to get it when cash flows in. I wished I could get a 220VA/12V battery as a different package but that's not available. The trolley itself is just for aesthetics..can do without it.

Now, the price of the package has gone up to 120k... . I feel I can get something better at that price or with a little topup as I want a 220VA tubular battery and probably a higher capacity inverter. So I intend to get a fairly used 1.5KVA/12V inverter and then buy the brand new 220VA battery...and probably get a second battery in the future to increase usage duration.

I also have a small space and wouldn't want any annoying humming inverter. So No No to modified sine wave inverters... I might be wrong...do they all make noise?...To avoid this, please how do I know a pure sine wave inverter apart from the fact that it's written on the product? Any special test? Do they make noise as well?

Budget #120‐#130k...Can this budget get me what I want? What better option, if any, do I have with this budget?

Pls advise and recommend...

616autos:
can i see pics nd location

616autos:
i want to buy c230 kompressor 2005/2006 model Please whats your take on the car concerning reliability fuel Efficency and maintainance i AM coming From a golf 3

olaolu11:
You have some info to supply still. How many hours will you use the TV, the fan(s), the bulbs. For example. I will use my fan for 7 hrs each day, the TV for 12 hrs and bulb(all) an average of 3 hrs per day. Then can your question be answered. As one of the gurus in the house will say, I am a novice and stand to be corrected.


And this your 500 watts inverter what is the make. Is the pix available?
And I doubt if the 500 watts panel will charge your battery full daily especially if it is a chinko and is not well positioned.

ololadeajayi:
Good Evening Bosses,

Please I need clarification on the illustration below.

I’m totally new to solar system. The transformer in my area got spoilt so I need a solar system and I have a standby generator for my fridge.

What I want to power with the Solar System are:

1. TV LED - 30 Watts
2. Table Fan - 25 Watts
3. Standing Fan - 15 Watts
4. Dstv Decoder - Unknown Watts
5. Bulbs - 60 Watts ( 15watts * 4pcs)

Below is the solar system they recommended for me which will arrive after this pandemic by God’s Grace:

1. 250 Watts Solar Panel - 2 Pcs
2. 30amps 12V (PMW) Charge Controller
3. 500 Watts Inverter
4. 200 AH Battery - 1Pcs

My questions are as follow

1. How many hours will this solar system power my gadgets before it runs down?
2. Am I good to go?

Thanks in anticipation.

God bless!

Cc: unicmarket mctfopt niyiomolyunade ceaser efuro ojeysky olaolu11

Teewhy2:
Good evening house,
Lost my 60 A MPPT controller of 5 years to heavy thunderstorms overnight and am trying to look for good brands Chinese brands that will also equalizer the battery effectively.
Can I get names of good high quality Chinese brands..

ceaser:
House.

Is this inverter good that it can be recommended for someone? I don't want anyone to come and be locking my shirt after 6 months o.

mcTrinity:
Lollzz... You forgot he stated "at almost 6 months interval"...
Biko, how do you buy Lithium battery package at intervals? Buy the battery modules, then later the box, and later the BMS.... Lwkmd!!!

essegis:
Abeg na for ordinary inverter system all this terminology dey inside so? Okay oo.

I know I'm lost but make I just dey look.

efuro:
Am pretty sure you did not depoly the batteries same time.
If you did not then we are in the same boat. But
I will differ from you cause I believe my balancers are doing a great job.
With 2 Taico balancers and 3 HAO2 attached to my 20 x 200ah batteries purchased at almost 6months intervals. Some of whigh are already 2yrs old but never experienced 50% DOD.

Though I acknowledge lithium is is the new template for us but
For some of us who can't afford lithium at a go will have to make renewable work at our pace using lead acid. It still serves me well with my manual Air conditioner working till day break and a resting voltage around 50.1v

So my brother.

Don't loose faith in balancers.
I only hope you did not allow the terminals touch

NiyiOmoIyunade:
Can you paste your BMV [Interfacer] or [node] [[20]] config for the BMV? The settings made in the EmonHub.conf file?

You are clearly not taking all the values spat out from the BMV interface sequentially so hard to tell.

Looks like H4 - 'number of charge cycles' tho or perhaps H11 - 'number of low main voltage alarms'

If I saw your EmonHub.conf file or Python script, I could tell for sure.

fogeg87963:
between 30 - 40k, depending on where you get it from
online store or showroom
ceiling of 35 watts practical usage

tonylaw07:
Please I need your advice. I changed the ac compressor of my 2003 toyota Camry and the ac guy connected the Fans direct. Now the engine is so noisy and the idle is above 1000rpm. I even noticed the car has started consuming fuel. Before the compressor was changed the aux fan only comes on when the engine gets hot. Please what can I do.

tipzy001:
I understand your point completely. Any idea on how much a 120 or 150ah Lifepo4 go for?

tipzy001:
"on paper". Mind explaining more what you mean by that?

tipzy001:
Wow, the price looks to be on the high side, more than triple of the fla, I guess it really must be very effective and lasts longer that the Fla. Thank you very much

tipzy001:
Thank you for your explanation and time. How much does a 200ah Lifepo4 go for?

tipzy001:
Any idea on how much it costs to refill and how long before I'll be needing to refill? Please I'll appreciate your knowledge on it

tipzy001:
Thank you for the response. By maintenance, can you please explain more on that? The technician said all I'll need to be doing is to fill it up with distilled water after a long time of usage

tipzy001:
Good evening everyone. So I got this recommendation from the guy that will be helping me install my setup and
please would like your opinion if the products are okay and will be efficient for me, my major load sums up to almost 500 [/b]watts for now... I attached pictures
1. Foresolar Inverter 3.5kva (130k)
2. Luminous liquid battery 220ah, I'll be buying two (120k per one)
3. Charge controller 60 amps (90k)
4. Mono solar Panel 270 watts, I'll be buying [b]2 or 4 (35k per one)

mctfopt:
Oh yeah. I know about that. Goods may arrive port and cleared, the real problem is how to get the goods from the port to where it is needed.

mctfopt:
To unload means they drove on the road from the port. How did they cross dem police/army/NSCDC etc checkpoints as per goods is not essential goods? That's where the levels I'm talking about comes in.

ceaser:
So I thought about the possibility of flexibility for DIYers in the use of the LFP packs. I have 2 packs of 12v that are each composed of 4 pcs CATL 105ah 3.2v prismatic LFP and 12v BMS, though different products. These cells do not require soldering job, only screws and wire lugs to from the pack.

What if there is a way to develop a quick swap reconfiguration to 24v, 36v, 48 and even 72v pack by just dismantling current packs and reconnecting with the appropriate BMS?

I feel this will reduce the headache of getting LFPs that will not support series connection. One can simply re-configure such LFPs with the appropriate BMS.

I'm not willing to try this out now o , not until I have spare LFP to play around with. I'm planning to acquire a lot of CATL LFP cells as much as my pocket will allow. Then I can expand capacity or reconfigure as I wish by just screwing in cells into the packs.

fogeg87963:
the king of sturdiness: Binatone RCF-1805
i have attached pics from their official page

olaolu11:
Boscon ac/dc 18 inches rechargeable fan