castrokins:
I have been a tenant for the past 4 years at a property and just a month into the 5th year. Before the end of my 4th-year tenancy, I made a deposit of more than half of my annual rent, say 75%. But the property owner is threatening me with notice to quit just the month after the end of my 4th-year tenancy. Note that my 4th-year rent expired in April 2019, the deposit I made is effective from May 2019 and the notice came in yesterday. What do you advise? Do I take my deposit and quit? In the threat notice, it is claimed I am a tenant at will and I have discovered a tenant at will is one who's holding on to a property after the expiration of rent. Given that I made part-payment to renew and it was accepted, is it right for the owner to claim I am a tenant at will??

You are not a tenant at will. It is however better to take your money and leave, but make sure you get your full refund before you vacate the premises.

Hitgistnaija:
Newsbroadcastnaija:
The entire final year Biochemistry students fail an exam in EKSU.

Cc


See more: www.newsbroadcast.com.ng

The OP is economical with the truth. The list displayed is the list of FAILED students and not the list of the entire class

Op should add location to the quoted prices

Arnoldfish:
On the issue of plastering, there is a normal plastering and there is guage plastering.

Sometimes the walls may not be straight and you may want the plaster guy to correct these block laying and casting mistakes. Sometimes may require chiselling and filling.

Some may require the use of range and pieces of tiles for leveling so as to achieve ruler straight walls and edges. All these are involved in the costing.

700k is actually on the high side, but not too much. No doubt 200k can do the same amount of job but the quality will definitely be different, well you have to be sure of what the higher quote guy can do.

Look at the dressing of the concrete fascia attached. You will notice tiles at intervals used to take guage then a range is used to smoothen. Even before the final dressing, the lines are already straight. You won't expect to achieve this with 250k.esp when you expect them to take their time.

Good write - up. I am however of the opinion that price is not always a function of the quality of the work. Price is sometime determined by the negotiating powers of the parties involved.

Most time when you approached a lawyer to prepare a deed of assignment for you, you are always tempted to conclude that the lawyer who charges more is more competent, but that is not truly the case.


The price is a function of the bargaining powers of the parties. The location no doubt plays an important role.

Arnoldfish:
Your brother is right, half foot is OK for the toilets, the living room can go as much as you desire depending on you plinth height and what you want to achieve but 1and half foot (3 steps down) is reasonable.

Then the kitchen is supposed to be on the same level with the dinning even with the lobby inbetween if there's any. Rather use a floor drain around the sink area and slope properly through the drain and the back door. Stairs on the kitchen will always get someone especially a visitor.

Thanks. Grateful

Good evening gurus and ogas in the house. I want to step - down my sitting room, kitchen and toilets in my project. My friend helping out with the project recommended that we step the sitting room with about 2 feet while the others about 1 foot.


My brother is however of the view that the 2 feet and 1 foot respectively is too deep. He is suggesting 1and half feet for the sitting room and half foot for the other places.

kindly advise.

ChiefSupplier55:
https://www.nairaland.com/chiefsupplier55

Is the free delivery limited to only Lagos or it covers the whole of Nigeria?

Mubby4luv:

Check previous pages

Thanks

Dominionng:


It is charged per sqm. Volume, location and most importantly type of design are major factors in deciding rates per sqm. Don't let anyone deceive you that there is a fixed rate per sqm for POP ceiling.
There is what I call
Budget designs(image 1),
Average design(image 2) and
Luxury design(image 3)
In budget designs, one is expected to use a bag of POP cement for 2.8 - 3sqm, 2 - 2.5sqm for average designs and 1 - 1.5sqm for luxury designs. So, since materials involve and time to achieve these designs ain't same, it is expected for rates to vary. Talk of quality ceiling or POP Precast vs Plasterboard is a discussion for another day.
At the moment based on the present hike in POP materials, you can get a good ceiling from 4,000/sqm. Maybe a little lesser if your project is in the eastern part of the country(POP materials is cheaper in the east at the moment).

Thanks for your response.

Good evening experts in the house.


How much do they charge for POP work?

ThatHistoryGuy:


This I knw

Thanks. Grateful

seanfer:


Yes He is and I’m sure He’s reading this also, but I won’t mention names.

These roofers shall. God will reward them in his own time.

Good day experts in the house. Which of the following is best for hot water line? 1) Copper 2) PVC pipes 3) PPR pipes

HsLBroker:
Xbox 360 for sale with 10games installed and 2 pads 500gb @N35k

Call 08114018823

Pictures?

Good morning. Can any one help with where one can buy HDF wood in Lagos and the cost

Lovely and innovative product you have there. I will chat you up for the price.

ChiefSupplier55:

Meaning I don't understand

I was referring to one of the marble slab above. It is a beauty

ChiefSupplier55:
Good morning

cost of this beauty

Cceramicaltd:
Good Morning. I don't understand this question please

Thank you for your reply.

I am referring to the items covered by the quoted price. Does it cover the water closet and the wash hand basin, mirror etc?

Madrid defence has been unstable for as long as I can remember. Something must be done about the defence.


Madrid should consider the offloading of Gareth Bale

Cceramicaltd:
Good Morning. Yes, we still have this in stock

Thanks for your reply. What is covered by the quoted amount?

Teebawse:
if it’s wall tiles no need,as it grips better unplastered

Thanks

Good day experts in the house. Is it necessary or compulsory to plaster a wall before installing tiles?

Is this still available?

ChiefSupplier55:
Granite and marble

What is the cost per square meter of the marble and granite

ChiefSupplier55:
30*60 Spanish wall tiles for 2900 per sqm

Do Spanish wall tiles come in 30 by 60?

rotecch77:


If its fabricated type ( Nigeria made)
*Frame type is around 40-60k
*Frameless type something in region of 80-120k
All depends on the size of the bathroom.


Ready made imported corner cubicle 90x90 price range 50-60k ( this comes with shower base, but have it in mind that every 2-3yrs you will change it,... low quality) non on like before when average quality was in circulation

Thanks. I will reach out to you

rotecch77:



4 diff people need to work there.

1 Brick layer,( to set up the block work)
2. Plumber( to arrange the piping system)
3.Aluminium fabricator (to design and install the cubicle) but if its already made type you don't need Alum... fabri.. plumber will do the installation.
4. Tiler ( he will handle the tiling aspect of the job.

Thanks. What is the price range of the cubicle?

Good day experts in the house. I am interested in having a SHOWER CORNER in my children bathroom. Kindly advise with respect to the likely cost and suitability for children's bathroom.

Is it the job of the plumber or that of the tiler.

Thanks

write2obi:
Your kitchen deserves the best! Choose from our wide range of granite and marble counteracts.

Kindly let me know the current cost of this product.

Email: royrukevwe@gmail.com.

Thanks

ThatHistoryGuy:



Morning greetings people

You get the number of tiles you need for your building by measuring each space(rooms,sitting room,dining,)with tape and getting the sqm of all floor and wall of the spaces .

Measure the length and width of floor and height of kitchen and bathroom walls

I deal on tiles so chat me up on 08157000908 for more clarifications .

Thanks. I will chat you up