₦airaland Forum

cocoduck:
Then why are you always harping on Gabon? I don't miss Nigeria, not at all.

aha cos they live three doors away from me,
And they say their country is craaaap

domack99:
This is so sad, but seriously you need to do your home work well by investigating thoroughly. I don't know about the east and south south but in Lagos and Ogun, it is easier to know Government property limit. Agreed sometimes people do not want to spend money to investigate property they are paying millions for.

I agree, but its usually after these events one becomes wiser.

cocoduck:
Are you jealous? You can't even write good English. Age is just a number.

ahahah jealous of you in GABON?seriously
And FYI I was not writing in English

cocoduck:
our Lord Jesus said, you must remove the rafter in your eye before trying to extract the straw in your fellow's eye, remove the rafter so that you will be able to see clearly when extracting the straw in your fellow man's eye. When you are doing to somebody a waka sign with your open palms, the back of your fist is telling you waka also. Think about it.

Guy you too small 4 me to talk parables with,you be learner 4 where I dey, you would be at least 14 years my junior judging from your 2006 WAEC.
We know empty drums sound louder,much louder.In all good luck with the cheap food and stable Electricity in GABON,you sure need it.

whirlwind7:
Thanks. My blood pressure just went down a notch

ahah Calm down nothing dey happen, but its the same all over Nigeria, never buy a land less than 10 plots away from govt lands, I learnt the hard way.
One of my close friend, got his Duplex pulled down in Asaba near NTA. it was not a nice experience.

whirlwind7:
Brother, I'm curious to know what campus it is? Can u kindly share, pls?

This is delta state bro

cocoduck:
the videos I asked you to watch, do the makers live on mars?
BTW what has it to do with country? the same cars everywhere,
Here, if I need anything I other for it directly from Dubai or Sharja, I am planning to buy a thermal camera which is a good tool for automotive technicians, I saw one American technician using it on YouTube.
Paul Danner is my mentor and he is an
American, I bought and studied his book, I ask him questions and he replies via email.
So what exactly is your problem with my location? I left that God forsaken country called Niggar area in 2006 in frustration after SSCE and I never regretted it,
Quel est donc votre souci avec ma domicile?

I have watched the videos even b4 you put them on here,I responded by saying only the 1st guy was a pro the rest are back garden Autoist. U can tell from where they are working. U Aving SSCE at 2006 puts it in perspective. I now know your frame of mind however you got a long way to go.When people don't agree with what you say do NOT result to insults,u never know whom U might meet,I have seen U argue and insult a US trained Mechanic who came bck to Nigeria to set up.Now this guy is a master in what he does. Im nt going to name him but it was not nice. At 2006 I already had a 2nd degree in mechanical engineering. .so wen I make refrence it would be from an Engineer's point of view not a mechanic so I might not be specific. Now you are talking about Cameras that's %50 of what I use at work.I'm doing research on the ANPR cameras also the Night Vision googles. I have learnt this is useful in Nigeria. etc.There are bunch of people on here who are highly skilled. Some in Nigeria some abroad ie GAZZUZ. seina etc just to mention a few. But name callings and insults won't get you far young man.

cocoduck:
ohhh is it there you are going? here things are cool, constant electricity and pipe borne water, cheap food and safety. Okay you are not mechanic, I am an automotive technician, I have nothing to to prove to you.

Realy. So you are a technician in Gabon. Ahaha and you are boasting about it eight? How about technicians in the USA wot did U want them to say

[quote author=Eluwilussit post=45428348][/quote]Very diffrent. The American uni is on merit not on cost.
They ja e high standard's there your billion won't get ur kids there if they gt no brains

seunmsg:
People should stop taken the UK dailymail newspaper seriously. It's a useless platform that thrives on propaganda. The same paper reported last month that Boko haram is defeating Nigerian Army at a time when boko haram has been heavily defeated and overwhelmed. This is just another of their meaningless attack on the president.

What part did they eer?

mayor2013:
I still would love to know how a scan tool can be used to detect a vacuum leak. You still have made any valid point on this. All I see is fuel trim which makes your comprehension of English language a suicidal one

This has been the norm from the Gabon man. He calls me quack I have not heard him say he is a Mechanic yet only on the internet.

cocoduck:
then proffer solutions not telling him his car needs an exorcist or spiritual healing, is it not where it all started? And I am waiting for you, and your swaptronics

Guy no vex it's like that Gabon sun don hammer you .it was not me who said spiritual problems check again

mayor2013:
Myopic thinking up there. God help your type of human

The thing tire me.I don't even sell parts.I dnt know how I was going to get rich by op buying parts.

adedolapo4:
Wow. seems like me coming across this thread is a coincidence, cos my boss just expressed interest in CNC technology also. Although I have totally no idea of what it is, he might just be of help for you guys as a potential investor. Please if you dont mind, can you send me a document of how this technology will solve problems and be of help in Nigeria. It can just be a brief of about 3 or less pages so as to show that this is serious. email: 1oguade@gmail.com

engineerjimmy
erico2k2

well to me CNC does everything we need in our daily life,put it this way, a CNC machine is an advance 3D printer,why this print the CNC carves,
The robots in an Automobile factory are all CNCs, your simple kitchen cabinet door can be machined by a CNC, teh coats of Arms of Nigeria can me machined by a CNC.All those flat pack furnitures from china are machined using CNC hence the holes and drills are precise...
Will add a youtube link

kenflipper:
All Engineers Share your knowledge on CNC CAD/CAM is there any CNC industry in Nigeria, i work in a $30million USD CNC industry as a CNC CAD/CAM programmer in the USA hoping i can save enough money transfer the technology down to Nigeria.

WELl I am into CNc, the mechanical part,I'm sure I would be of good assistance to you when the time comes, i got some wicked Idea,just like you I work in same industry but o n the mechanical side, as I am a mechanical Engineer, however,Im relocating back to Nigeria pretty soon and would be based in PH, I already got my site for my company/factory, are you doing the same??

domack99:
I believe the school was established in 1988, Prior to now, all off campus accommodation were located inside town which is about a minimum of 15 minutes DRIVE to the school main gate. Gradually due to transportation challenges and cost, some investor have started building accommodation closer to the school within a trek able distance.

The land in question is not directly opposite the school but if you are familiar with FUNAAB environ, there is a road directly opposite the school main gate, the land is located down the road, lands directly opposite the school are either hostel accommodation or other school related business activities.

Exactly, your last paragraph was where I was driving at, I once bought a plot very close to a school for a Hostel project,,hostel was built up to window level, 10 self contains, na so school carry combine force come.
If say I no B Area, i for lose money, this is how I dragged the family to get me 4 plot to compensate for my loss. in about 20 mins drive from the campus.Will begin work in 2 years time wen the areas are well developed.

cocoduck:
ohhh
so I was pouring water on stone, sorry ohhh I know my onions

save it, I don't deal with people who vomit insults on others when they can string their point across.This ain't even politics.

cocoduck:
get away you, 1diotic quack,
do you even know who these guys are?
You are not even fit to tie their shoe laces.
back yard shade tree mechanic like you.

AHA I remember you,The internet mechanic from Gabon,Internet Mechanic, well done,I forgot you are full of insults, this is how you embarrassed yourself arguing with GAZZUZ,arguing about speed sensor
You calling me quack when I am not even a Mechanic,
You nor dey tire

cocoduck:
king rein and eric whatever whatever, I hate too much talk now watch how REAL professionals do it you quacks,


https://www.youtube.com/watch?v=cuod8-zFSQ4&itct=CCcQpDAYASITCPqn8eK2yMwCFddrHAodZk8Pi1IlaG93IHRvIHVzZSB3YXRlciB0byBmaW5kIHZhY3V1bSBsZWFrcw%3D%3D&client=mv-google&gl=US&hl=en




https://www.youtube.com/watch?v=MI2o9YNZ2Y0&itct=CCUQpDAYAiITCPqn8eK2yMwCFddrHAodZk8Pi1IlaG93IHRvIHVzZSB3YXRlciB0byBmaW5kIHZhY3V1bSBsZWFrcw%3D%3D&client=mv-google&gl=US&hl=en



https://www.youtube.com/watch?v=uxRBViOV6DE&itct=CB0QpDAYBiITCPqn8eK2yMwCFddrHAodZk8Pi1IlaG93IHRvIHVzZSB3YXRlciB0byBmaW5kIHZhY3V1bSBsZWFrcw%3D%3D&client=mv-google&gl=US&hl=en

What you don't know is greater than you are.
None of you proffered any solution to the op instead the mayor whatever whatever mocked him, and that is where all this nonsense started, we are all here to learn, if you find something strange ask questions, that is what makes you people humans!

Why are yoy twisting stuff
U claimed yoy can find a vacum leak with a scanner. I said you can never do that. FACT.
Non of the two last clips posted are pro they are just Autoist no garage will employ those crude methods they will use a smoke machine in the first instance to trace all the lines.
The first video was establishing that there is a vacum leak bit his method can never detect where it was.
So YOUR POINT IS??

MPVGoddess:
Now that you mention Knock sensor, not all knock sensor codes come from a faulty knock sensor.

I thought I had a faulty knock sensor, and so got a new one, still the codes would come back so I traced the wiring to the ECU and discovered that they were shot, so I can new wires to the knock sensor and the one I had in the car still worked, so I didn't have to use the new, point is, I recall that his vehicle was recently worked on, and several wiring gremlins appeared, so please rule out faulty wiring before getting a new knock sensor

In most cases with sensors. They are usually not the fault same as fuses. .They are there primarily to give readings. I get that however I am tuning to the frequency where and how a vac leak will troger a knock sensor code.
But you changed the wires to the knock sensor right? Is that not one of the reason it will throw a code??

kingreign:
i've been observing you for long enough to finally conclude youre still a novice in automotive diagnosis and repair, yet you feel youve arrived at the zenith of what is what in auto diagnosis and repairs and you're aversive to advices.

imagine advocating for use of water in vacuum line? No go hydrolock engine of person wey get wahala pass you o.

lol guy some people do use water, but it works in same theory as you use water to check air leak on a tyre tube when you imerse it o n soup water, U know how we dey do bike tube back in the days, but in this case U just spray soapy water o n the suspected areas and watch it bubble, but for me that's hard work.So its grandfather method lol probably B4 the smoke test.

mayor2013:
More than 3m.

Even at that, you still cant do it all, I know BMW,MEr and Audi have specific scan tools for their dealerships only.

mayor2013:
I beg to disagree, there is no need using a smoke machine since a scanner could help you trace a vacuum leak

cocoduck:
what is a complete diagnostic tool?

those that cost up to N3m

olihilistic:
why overrating her?? na becos of her skin smh

ofcos, cos there is nowhere in the world you will see this two times

cocoduck:
so its only the know sensor you see?

No if you check I interpreted all the codes for the OP, I mean ALL
read it again, did you see the P0180 and P0325 codes? what have they got to do with vacum leak?

cocoduck:
all the codes the op listed affects the fuel trim on one way or the other,
when there is a vacuum leak it means there is unmetered air that made it into the engine, the fuel trim will adjust for that excess air which is verified by the o2 sensors by adding more fuel, I mean prolonging the injector pulses, till the mixture returns to the STOICIOMETRY, it shows that, when the stft begins to increase in percentage, whuch the ltft will follow later, at idle a vacuum leak is more evident, because there is little air inside the engine, but at WOT there is way more air and the ECU knows its a WOT so there will be longer injector pulses, with will diminish the effects of the excess air, so when you push down the throttle pedal and you see an improvement on the fuel trim, definitely it is a vacuum leak, and all these happen at close loop.
If you throttle the car and the fuel trim gets worse, it is either a dirty MAF or not enough fuel is making it,
this car might be running rich, we don't know, how do you know what the ECU is doing? is it not the fuel trim? Which is gotten from the live data.
All I want you guys to know is this, yes you have the code, but it is not enough, freer frame data and live data must be among, for proper diagnosis. That sets you apart from the shade tree mechanics, you are a scientist, not a cut and nail Id1ot

And the knock sensor?

cocoduck:
before I start, what do you think LTFT and STFT are?

ah na wah but we should not trail away from what we are talking about here
Long and short term fuel trim
But how does this affect the knock sensor

EgunMogaji:
I ended up riding home in the "drink"

Who sang "it doesn't rain in California"?

The witches have landed lol

mayor2013:
Better to be used is carb cleaner

yeh but if your car don't start you can't do that, if you don't have access to the pipes/lines you cant do it as well,

cocoduck:
I said in some instances, ice on the intake manifold, after the MAF, you can use water, trust me

ok, well I have found the smoke test better and more accurate