₦airaland Forum

Zhirinovsky:
Seems Alpari only does money market activities. What platform do you use for your stock trading?

Morgan Capital

Zhirinovsky:
Think am kinda scared of fx. What platform do you use for your trading? How efficient is it?

Alpari. Very efficient.

Zhirinovsky:
With 50k you can open a stock trading account with morgan stanley. Please are you an active day (stock) trader?
I need an active high frequency trader who I can rub minds with. I have been doing some learning stuffs with virtual trading for some months now and plan to setup a real day trading portfolio...am going in full time

I just resumed stock trading after 8 years so I am not a proficient mind to rub off. I don't intend to buy and sell stock daily, as I look to hold for a while. Speculation still has my funds trapped since the crash. I have a much better grip of fx.

A piece of advice - go easy....

Readonee35L:
You're welcome.
What errors are you talking about Kashif

It is not the supposed debris washed off the clutches that has the potential of making them slip. Rather, it is dirt film washed off seals and/or dirt dislodged and possibly causing solenoids and/or valves to stick. When clutches are starved of pressure, they slip.

If a clutch is worn to the point that it needs dirt to hold, it's engagement will be very rough.

There are two flushes - cooler line and pump inlet, with the latter being more efficient though messier and more expensive. It gets the most fluid out.

A spent fluid can be without particles, while a cherry red fluid might be full of clutch and metal particles; metal particles wrecking more havoc.

But like we know, the devil is in the details. In primary school, we were thought that plants lack locomotion, but when you study biology, you will know otherwise. Hope you understand now?

An excellent piece for a regular car owner.

Diamond bank, Unity bank on full bid.....

Very good presentation with overall revealing info for a car owner.

But, there are some errors in the details.

megainvest:
FCMB and Fidelity Pre-market looking very nice

For shareholders or prospects?

FxDuke:
too small ...stock market is a longterm thing! why not try money market (fx) for a start? it is good for short term investment.
to trade on NSE floors daily, u need at least 10 to 50m.

10 to 15M? You must be kidding! I trade both, and I know this is misleading.

Intendy:
A likely reversal of flexible exchange policy anytime soon

watch

Hmmmm

Diamond bank buy order remains unfulfilled since morning....thank God the 6,000,000 bid at day's maximum is out of the way!

tiwiex:
TSA is a good idea on paper if our focus was just on corruption. This is my issue with it. It failed to understand the economic impact. Before someone tells me banks should do really business, it takes time to reposition. Their business cycle was disrupted over night but we were just clapping. The money we are saving through the process does not out weigh the negative impact on d economy. This government wants to worship money but not realizing the fungibility of it. It should have been left in circulation thereby creating new jobs and not just destroying. It is not only the bank staff. Even businesses and that is way more.

I heard that this tomatoes crisis is a TSA problem. It probably makes sense. There is a contingency for such an incident. It happens quite often but we just never noticed. The government refused to release money because Oga at the top interpreted it as corruption. Using maybe 400 million to prevent this is better for the whole country. Its about N2.50 per citizen but our current people are short sited on economic losses. God help us oh.

Analysis paralysis.

How is withdrawal processed at Morgan capital?

Avengers telling us that our soldiers cannot swim? Nonsense!

Godisfaithful:
Sir, if i were you, i will go for Diamond


Remember, you are responsible for your DECISION!

Absolutely; thanks.

megainvest:
Where you dey when we dey shout UCAP @ 2.09 this morning?

I no hear o. I will wait for the next bus stop. Diamond and Fidelity nko?

This thread is about NSE stock pick alerts. Wey the alerts na?

Me no know fundamentals o.

Kashif:
Between Fidelity and Diamond bank, which is a better buy? Both are currently on offer with no bid - 3,000,000 and 15,000,000 respectively.

I am waiting for the bears to wear themselves out though.

FBNH making a sterling recovery....bid outweighing offer....

nija4us:
Plz what's the offer and bid for zenithbank

7,400,000: 1,100,000 Offer and bid respectively

Between Fidelity and Diamond bank, which is a better buy? Both are currently on offer with no bid - 3,000,000 and 15,000,000 respectively.

I am waiting for the bears to wear themselves out though.

justi4jesu:
Items shipped from US today. I will update the list of items soon.

What's keeping the update?

Igbafen:
I need help and advice from experience nairalander, my golf 3 automatic transmission car, stays in gear even when brake is applied. It keeps moving or trying to move unless you move to neutral. When I start it, the rpm goes so high as above 10, and later to 10, my mechanic has tried all he can from adjusting and readjusting the carburettor to changing temperature censor and all that. I was told to is the valve body, some said is an electricall fault. So recently I did a scan which read faulty ECU. And its said no communication between ecu and the transmission. Any idea is appreciated.

When in D, your car is always in gear; stationary or in motion.

What is your engine RPM at idle? I don't understand the '10' above.

What of original Lenovo T410 9cell?

Costee:
@Kashif how can you be contacted?

Kashimanjeroartyahoodotcom

aribolseg:
thanks so much @kashif

you really got my issue and now i have a better understanding as regards the malfunction.

i have involved @nisspart. we already discussed and i will get the car to him next week. i'll let you know of the outcome.

one more thing please.. does the tranny still selects gears if one continues driving after the TCM cuts off signal to the ECU?. just wondering cos the car keeps moving at this point though not a normal drive.

It drives in failsafe mode, meaning the RPM will be higher (typically 3000). When transmissions safe fail, they tend to drive at mid range. Let me know how it goes with Nisspart. It will help to test all electricals relating to the transmission . Good luck!

aribolseg:
ok.. so what do you guys suggest i do

I have now reread your original complaint. It is a SM/VB issue with that transmission. The TCM is inside the transmission. It receives signal from the speed sensor and sends same to the ECU, which in turn sends to the speedo. With the stepper motor malfunctioning, the TCM thinks it has a bogus feed at around 40mph, and cuts off signal to the ECU. Your speedo should start working again after speed drops to around 8mph right? At the other hand, it could be the TCM!

I don't know who is troubleshooting this for you, and the level of his competence but unfortunately, I cannot do much for you personally apart from probably helping look for a stepper motor for you. CVTs have fewer components than a regular AT, its problems most times are with the electrical. Has a technician looked at the car?

shotuns:
Hi guys, Is this forum still alive?

It's memorial service is being planned for 6th June. Hope you'll be there?

aribolseg:
IN4AL21E87C169053. thats it guys

If it's confirmed that your problem is the SM, I could source it for you. Good luck.

GAZZUZZ:
boss I need the contact outside.

The guy say he no get again. Story man! I will get it myself.

I disabled the DRL basically because I don't like it. Second, it will put less load on the battery, and improve lamp longevity. The electronics you plan to install will increase your electrical load by a margins I cannot readily estimate.

I completed the rebuild, but it is untested. At the time of rebuild, I did not air- check the clutches because I did not have the means. Now I do, will have to do it again.

Costee:
That might not be cheery. I was actually going to refer him to you after discussions with him.

If it is strictly stepper motor going bad then, it is straight forward but, we know how these codes work

Costee:
That is, P1778 is triggering off P1574 and P1715.
P0550 (Power Steering Pressure Sensor), I believe, is an independent issue.
Still, I prefer to reserve further comments until I'm sure of your car specs.

Exactly.