₦airaland Forum

The moves to replace this guy has started already. This is to plant the seeds into the heart and mind of Nigerians.


But they don't need to do such. We already know he's totally incompetent

actionnigga:
How much is it

this gate goes for 500,000

But with wrought iron materials,it goes for 800,000

Expect more works and updates from tomorrow. I plan on pushing this job after the delay we have had.

Good evening

[quote author=cuddling44 post=106015410][/quote]a contractor under pressure to deliver will comfortably swallow it to ensure he delivers

cuddling44:
Tanks for d infos sir..... he insisted on 200k last and his boys are going to be doing d work for 2days and i will hire someone myself for d wetting.... d 200k is outrageous to me for two days... d mould is 700 per bag so 50 bags will be 35000. I will be going 4d manual moulder

sometimes at work, what you're actually paying for is the pace at which the work is moving.

With the the machine, you will have your blocks ready in two days and can move on with your project. But with manual mould, two weeks might not be enough.

So it all boils down to when you want to get the job done with. I remember someone giving me a job and asking me how much I want to ensure it's completed before schedule. He was willing to pay to make it happen.

spyder880:
I plan to paint this plaza before Christmas. We have suffered so many delays due to external factors beyond our control. But with my workers arriving in their numbers, this work will experience the type of speed we are known for.

More workers will travel to Akure before the end of this week.

paint before Christmas?

Ewo. That's fast oh. Thank God we're going into dry season Sha. The sun will help a lot

There's an increased work going on here.

If it's sustained, you might finish the carcass by December

Nero2424:
Is this the project you are handling in my home town?

finished with the project. I just think that the sumo is enough and no need for another pumping machine. That's why I'm seeking opinion of experts here

Dabronze:
Name the five state you ard talking about

Lagos will merge with the whole SW, the whole SE will merge,NW and NC will merge with Abuja, Kano will merge, Rivers and others will merge

If wike gets his way,we will end up with five states in Nigeria.

megacontrol:
Good job.

This looks solid already by mere observation.

I have a case at hand where someone wants to raise an old stanchion further upward. It's a modern duplex that has been habituated for btw 5-10years and the tank stand was done with H-beam. Can it be easily extended upward to gain more head?

Thanks

good morning sir. Sure it can be raised to desired height

tranxo:
Maybe we should then start molding gates as a unibody to satisfy your logic? Gate kwa.

sir, definitely we cut to create something new. I only advised that you make it as minimal as possible.

Thank you and stay safe

Wow. Your mom don suffer oh. Thank God she's dead and won't be alive to hear her own son accuse her of blocking his oath to success.

Yes as a single person, you can get by without taking loans but the moment you're married, it is either you triple your source of income or you borrow. You're no longer feeding yourself but also your wife, your in-laws and friends whose Sunday visits will be frequent.

Here's what I want you to do, look at your finances and see where you can make savings and see what you don't need and stop spending money on them.

Also bear in mind that the economy is terrible at this point. You're not the only one going through ups and downs. You just have to dig deeper into yourself and find out how to navigate this muddy waters.

Stay safe and enjoy your week

After that, I had to make provision for a 3ft gate embedded into this.

Reason for doing that is because the client doesn't have much space in the compound to fit that one differently.

More pictures of that by tomorrow

I haven't been able to start working on the gate because I travelled to another state for a job.

Came in last night and decided to start working on it today cause there maybe another restrictions of movement tomorrow. I also need to make up for the lost times.

First we needed to measure the dimensions of the gate to ensure it's up to desired height and width.

Then we made the curve at the top. You may not know it but making the ark needs experienced hands and skill.

spyder880:
That's how most gates are. Especially for rolling gates, the inside designs could interfere with the smooth movement of the gate.

the movement of the gate isn't much of a problem sef. Even with designs, gate can still be rolling.

For any iron work to last, let the cutting and welding be at the barest amount possible. Once you cut, the durability of the area has dropped. Even when you weld, you will jump some areas and those areas make it vulnerable to aging.

Think of it like a person with a fracture. The bone can NEVER be as good as it was.

Our people will say that the wound of a cut will heal but the mark is permanent

Good evening everyone.

Please I need your help and advice both professionally and by experience.

I recently did a 40ft tank stand for a client and there are going to be six(6) 750 gallons. The issue is that the plumber said the client should buy a pumping machine after buying a sumo.

So my question is,is that necessary. Isn't the sumo enough to pump water to the tanks and then gravity will bring it down. The plumber is saying that the sumo can't do that job effectively and should be supported by a pumping machine.

tranxo:
Chief why is the rear so plain?

here's what I can tell you about the gate or anything else like that.


The less cutting and welding the better. Just take it from me

owobokiri:
Does the federal government wait for your governors in the north and the south west to do the whole state roads before the federal government starts rebuilding federal roads in your domain?

your wahala long and your mindset is what's keeping you from holding your governors accountable.


Keep blaming North and South

owobokiri:
Stop talking rubbish! Obi and chime were governors when we had relatively good returns from oil sales and as such the allocations were good. They also had Jonathan who was ready to pay them back after such works. In the present case. Fashola has repeated it many times that he will never pay back any money used to do federal roads by the governors. That was specifically for eastern roads. The governor of Abia state has complained bitterly that federal government has refused to allow him do bad sections of federal roads in Abia state! So it's an intentional marginalization policy of the Buhari regime as championed by Fashola the tribalist.

is the federal roads stopping him to do the state roads in his domain

obyrich:
The massive decadence of Federal roads in the south East is putting huge pressures on state roads and wearing them out beyond the carrying capacity of the state budget. Many state roads are over worked due to traffic diversion from neglected and impassable federal roads.

I am not making a case for the governors but I cannot blame them entirely for the rot. They have their constraints in terms of funds.

the current governors are useless. Obi and Chime did palliative works on federal roads and these current governors were paid for the works.

What stops them from doing same. Have you even seen the quality of roads these guys are currently doing. I know roads constructed by Ngige that are still standing strong but those done by Obiano are all washed off

CaptainAyub:
Stop saying what you don't know.
Anambra, Enugu and Ebonyi fare well in terms of state roads.

don't sit in your house and discuss. I transerve the states almost every week.

You will feel sorry for the states

I can tell you that all the governors of the SE are useless.

Not just federal roads. Even state roads

All these advise won't stop iPhone 13 from selling out. This is just talks

See few viewership of this thread. Imagine say na Arsenal Fc are loosing, they will come in numbers

More pictures

Here are some more pictures of the job.


Hoping for journey mercies as I travel home

mufutau55:
Thank you very much for your response Sir.
I will surely keep the budgeted cost in mind.
The quality of the iron and the job should serve well.
Keep up the good work Sir. Stay blessed.

Hajji M.

just finished with the painting job this afternoon


This is what it looks like

It's currently receiving a paint job.

Painting has started on the tank stand. More pictures later.

n3xt:
Oh! I’m actually talking about what will complete the construction and erection of 1 stanchion.

still very expensive something

These clubs are hemorrhaging money thanks to wages and signings which are at all time high. COVID-19 complicated the very fragile economic stability.

Super league is bound to happen whether the fans want it or not. Football is a very expensive business to run and current owners want to run it as profits oriented venture.

These clubs need all the money they can make and super league is just one of them.

The smaller clubs don't care because they reap off the big clubs by the sales of players with extremely high profit margins. Meanwhile they don't have much wage bills