earthrealm: Breaks down the sulphite deposits on the plates of the battery. These sulphites deposites reduce the conductivity of the plates, and hence battery performance
Are they used for only flooded batteries or all battery types?
unicmarket: Getting to know the track record of panels is necessary before buying,
It’s obvious if it’s new, there is a bad system, or a manufacturers fault, many cheap panels out ther my later result in cables and cells quickly getting degraded.
If it’s not burnt( because of any mistake), please call the attention of the seller, for replacement warranty, am sure it came with one.
What Premium brands are readily available in the Nigerian market pls?
haywire1: I am planning on buying this pulse charger on jumia, is there anyone using this type on here
.
earthrealm: Y3ah, prefer the smaller foxsur, with a dedicated pulse/repair button.just that its rated for only 100ah batts.outputs only 8amps max on 12v
I have 1 unit of this Charger for sale 16k. It outputs over 20amps at 12v, and suitable for upto 400ah batts
Penuelseun: No, you can't power your house loads directly from the charge controller, it is not designed for something like that, you only connect your load to your batteries or bus bar
So why then do charge controllers have ports for "load connection"? Pardon my plenty questions. Trying to get some basic knowledge to make good decisions.
earthrealm: The best approach is to use a bus bar.. drill 4 to 7 holes on it. Send battery there, inverter, charge controller, there..
The common approach is using the battery terminal, the inverter and charge controller all meet there
What about the loads of the building? Does it go there too?
Because it seems both the inverter and the CC has ports to connect building loads. Which one takes priority.
Please, I also want to know if a charge controller can power the loads directly bypassing the batteries. For example, during the day when there is sufficient sun power.
earthrealm: There is no straight forward answer to this. Just set your charge controller to the correct setting of your battery and hope for the best
Thanks. But what I mean is, are charge controllers connected together with inverter, or charge controller and inverter have their independent connection to the battery?
earthrealm: So my beloved 2hp samsung ac kicked the bucket, got kazeemed (replaced the outdoor unit), shit failed again after 3months, so looking for an inverter 2hp ac.
Between Lg, hisense and haierthermocool, which gives the best bang for buck??
People are saying LG is the best among them due to having more experience in AC inverter technology.
7 battery type selection Sealed(AGM), Gel, Flooded, Lead-acid User, LiFePO4 Lithium, Li(NiCoMn)O2 Lithium, Lithium User(9~34V). Dual 5V DC USB output interface of this mppt controller can charge your electronic devices directly.
Price- 75k
Call - 08117398294
Please, what is the maximum wattage of panels that this 40amps make use of? And how many equivalent 200amps batteries will be required?
dollarnaira: Thats the culprit bro. I wont allow any inverter give me a beep sound personally bc the tone indirectly means low low low voltage most times far far far below 12v i.e 10.5v esp gel batteries. NEVER DISCHARGE A BATTERY BELOW 12V (dont eat more than 50% of ur charged battery under load)--- this is my tradition. I can only vouche for original full river batteries bc they are known for bn super rugged.
My Full River batteries only takes me for 2 years. Is that okay or the inverter/myself is messing up the battery lifespan?
I use two 200amps with 24V Prag 2KVA inverter set at 20amps charging current.
Fisher007: Brand of batteries - I use four 200ah Genos batteries.
Yes it is true inverters have inbuilt charger, but in most cases, they never charge it well. Most times your batteries go low and to bring it back up with normal inbuilt charger is not attainable.
Haven't you heard of cases where the inverter batteries seller will tell you they need to supercharge your batteries so that it can attain back it optimal use ?
Although most of them will just tell you, your batteries are dead or bad. Lol They probably supercharge it or resell it sha.
And by the way, the supercharger is connected with the inverter and the batteries directly. It is not separate.
My batteries are weak. But I suspect they can still deliver if properly charged. Can the so called superchargers achieve that? Which one would you recommend please?
saint2ace: Yes u can if u're connecting in parallel thus giving a 12v connection but charging might be a problem depending on the inverter being used. I know microtek and luminous have decent charging capacities but prag has a better charge output than both.
But if u're doing a 1.5kve 12v connection in parallel without solar, I would advise u get an external charger, even the cheap Chinese models will do
I have Prag 2KVA inverter, but still suspecting poor charging as my batteries barely take me 2years. The inverter has 10/20amps charging option. For my 2nos 200amps full river batteries, I set the charging amperage to 20amps.
How does the external charger thing work pls? Will it still be able to resuscitate my weak batteries?
earthrealm: same sh,it if you are well versed in battery charging chemistry, you would understand what i mean. quanta battery for example, has 13.5v to 13.8v as charge voltage kung long battery has 14.4v to 15v as charge voltage...
well designed inverters hv selectable battery charging switch with corresponding diff voltages, so you look at the battery and select the voltage that is specified.
luminous inverters, just have that useless low/meduim/high setting, with no information of the exact voltage its spewing out at each setting. i still repeat, i will never buy a luminous inverter, only way i would consider it , is if i have solar..then i can set the correct charging voltage on the charge controller .
not charging a battery with the oem specified charging voltage will damage the battery and result in premature battery failure
Justine24: Hello everyone. Good day I have Sumec Firman ECO12990ES I have been using the generator for since 2017 it have not given me any issue that is why I love this brand
This is the 9KVA right? I'd appreciate a referral to where to get the original.
Aolconsult: This article wouldn't have come at a better time than now, in view of the recent activities of the Lagos State Government in some parts of Lagos State where some buildings were recently demolished for violations of planning law.
This article will help you to know what the law says, the professionals to engage, addresses and offices to visit in order to get your building approval.
Below are some key parts in the article
INTRODUCTION One of the major challenges affecting Nigeria today is housing deficit. From 1999 to 2020, the population growth increased by (119.3 million/206 million) 57.91%. Hence, it may be erroneous to claim that the housing deficit is 17 million, as we have more people homeless now in 2021 than previously have been at any time in the history of Nigeria. This can also be corroborated by the fact that Nigeria is said to be the capital of world’s poverty in terms of population.
For anyone to carryout out any development in many jurisdictions around the world, there is a need to get approval/permission from the authorities in those jurisdictions, which is why this article is focused on the processes involved in getting approval/permit to build any structure in Lagos State
CLARIFICATION: PLANNING APPROVAL IS DIFFERENT FROM C OF O/OTHER LAND TITLES Before going fully into the topic of discourse, it is pertinent to make some clarifications of what planning permit/approval is. Approval to build or develop is completely different from land title.
Principal Ministries and agencies to deal with in order to get approval Lands Bureau, Ministry of Physical Planning and Urban Development, Office of the Surveyor General, Ministry of Environment, Ministry of Transportation, LIRS, NTDA etc
THE PROCESS OF GETTING THE APPROVAL In consonance with the Lagos State Urban and Regional Planning and Development Law 2010, the Ministry of Physical Planning and Urban Development is responsible for Physical Planning, Urban Development, Urban Regeneration and building control policies of Lagos State The ministry also supervises the following agencies: Lagos State Physical Planning Permit Authority (LASPPPA): Lagos State Building Control Agency (LASBCA): and Lagos State Urban Renewal Agency (LASURA)
Planning Information Either before or after buying the land, there is a need to apply for planning information from the Ministry of Physical Planning and Urban Development.
Preparation of documents Upon getting a nod from the Ministry of Physical Planning and Urban Development based on the planning information, the next thing the intending developer should do is to start preparing necessary documents.
Submission of relevant documents Sequel to the preparation of necessary documents to facilitate the application, the developer would then submit same to LASPPPA office in the local government area where the property is situated. Some of the documents to be submitted include the survey plan, architectural drawing, structural drawing, among others.
Obtaining assessment Officer(s) will very verify the documents, request for more details if necessary, make corrections where necessary and thereafter schedule a site visit for inspection
Payments to be made The assessment is always in two parts. Part 1 will be payment to me made to LASPPPA as the agency granting the approval and the other part will be payment to LASBCA for stage certification.
Issuance of development permit/ approval Sequel to confirmation of payment into the dedicated account, officials of LIRS would issue a letter to the GM (as stated above). The letter would enable LASPPPA to complete the approval process and development permit is issued to the applicant/developer.
BUILDING CONSTRUCTION PROCESS After getting the approval from LASPPPA, there is need for LASBCA to grant approval to commence construction. The developer cannot just mobilize workers to site on the basis of obtaining approval. Developer must take the approval to LASBCA in order to get another approval to commence work.
MOVING INTO YOUR HOUSE AFTER COMPLETION OF DEVELOPMENT After completing the development, LASBCA must issue certificate of completion of building construction and fitness for habitation before the developer or house owner can move in
PROFESSIONALS TO ENGAGE FOR PLANNING APPROVAL In consonance with the LAGOS STATE PHYSICAL PLANNING PERMIT REGULATIONS, 2019 issued by TPL (Dr.) Idiris Okanla̕ Salako the Commissioner for Urban and Regional Planning, the following are the appropriate relevant professionals registered to practice in Nigeria: (i) an Architect, registered (ii) an Engineer, registered (iii) a Town Planner, registered (iv) a Licensed Surveyor, (v) a Builder, registered (vi) an Estate Surveyor and Valuer registered (vii) a Quantity Surveyor registered
GAZZUZZ: Only engines from USA and Canada have vintags on the engine and transmission.
2005/2006 is same engine.
Goodluck
P.s that's just 171,000miles
Thanks for your response, really appreciate. I have checked another one but now confused on which to choose.
Please if you were in my shoes, which will you select based on the points below?
Option 1
2005 engine used by 3 previous owners as personal vehicle in Ontario Much of the servicing history not shown Reported mileage of 177,712 (mileage inconsistency was highlighted, though from my personal observation it was consistent from zero to 179,880 in July 2015) Still in Canada early this year but eventual fate of the vehicle not known.
Option 2
2006 engine used by 2 previous owners as personal vehicle in Ohio Very consistent servicing history shown on report by same garage from 2005 until 2nd owner took over in 2019. Reported actual mileage of 209,381 Still in the US early this year, had accident in February, 2020 and was declared total loss by Insurance, was thereafter issued salvage title.
I want to replace my Odyssey car engine, I then decided to follow your advice by doing a VIN check. Most of the engines do not have the VIN tags, I was even thinking maybe those guys were deliberating removing the tags. I finally got one with tag and did a check.
For the only engine I was able to check, the last reported location was Canada in 2017 and the Odometer was reported as 286,000 kilometres as at then . The mileage is quite scary but its a 2005 engine, though my car is 2006, but I guess the engine can also work for my 2006.
I am in a fix on what is a good buy for the 2006 vehicle. Kindly advise.
oyatz: Bros you need to understand one thing very well:
Islam is NOT exactly equal to Fulani.
An Emirate is an Islamic Theocratic State.
Ilorin Emirate started as an Islamic Theocratic State but later became hereditary monarchy and it involve people from Fulani, Yoruba, Nupe and Hausa origins.
E.g Ilorin Emirate has four Baloguns who are part of the kingmakers and these are
1) Balogun Ajikobi (Represent the Yorubas).
2) Balogun Fulani (Represent the Fulani group).
3) Balogun Alanamu (Represent the Yoruba)
4) Balogun Gambari (Represent the Non-Yoruba, Non-Fulani groups)
spartacus11: Will be replacing my Nokia X5 with an iPhone 6s to use as hotspot for my galaxy A70, instead of buying Mifi device to use Glo band 28 i rather just buy the 6s for that purpose. since iPhone comes with band 28, i need the Glo data abeg
Are you saying the Samsung A70 cannot directly connect to Glo 4G band?
With reference to your schematic, what I was referring to looks like the water pump pulley. Everything looks in order. Thank u.
The transmission fluid na long thing oh. I guess Toyota is confident their transmission will not drop oil level unnecessarily and requires just periodic fluid replacement. Thanks for the link.
I am unable to locate where to check the transmission fluid level and conditions of this Camry 2012. PSF container is no where to be found as well.
Also for the two other pix, it strangely looks to me as if the serpentine belt is wound the wrong way at those places I highlighted. It's as if it ran behind, instead of upon that part I pointed to (no idea of the name).