Microgiant's Posts
Nairaland Forum › Microgiant's Profile › Microgiant's Posts
1 2 3 4 5 6 7 8 9 10 11 12 13 (of 24 pages)
loluc90: @microgiant,how do I get H-H motor and cost PLEASEsee if you can buy from here http://galaxy-marketing.com/rotors_motors.htm SG-9120 HH DiSEqC Satellite Dish Motor is the best for Nigeria. |
odilibe: But why was your previous lnb(s) wasn't struck by lightening..just immediately you install the avenger lnb it got struck by lightening....Ok, for your info I just moved to Warri and was using Strong LNB before the arrival of the Avenger LNB. There was no lightening and thunderstorms but of recent Lightening and thunderstorms had been more frequent in Warri, that is, from mid October. Strong winds had also damaged my H-H motor although it's still working but not perfectly. Stayed in PH and Yenagoa, lightening and thunderstorms normally occur between March and May, onset of the rainy season. |
@George, It's like the Waffi lightening had struck my Avenger LNB. I will do a comprehensive test today after work to confirm. The TV and STB are not affected as I always unplug them from the mains and disconnect the RF Cable daily as a precaution. Lightening in Warri is something else. |
Thanks to all those who took time out to do the tests for everybody's benefit. This is a great eye opener. Although most have known that some LNBs are designed for prime focus and others for offset. We have been using offset LNBs for prime focus dishes due to availability and limitation in getting the prime focus LNBs from outside Nigeria. Once more thank you to Odilibe, George_D, Ikiriye, Obnelly, Adex70 and everybody on the FTA thread both active and inactive for their support. |
Ikiriye: @ adex70I have one Invacom you can borrow for the test. https://www.nairaland.com/444503/high-definition-receivers-hd/1#6400113 |
Congrats to all the winners. @seun Please can you design the ad link to open in another tab/page. |
@Ikiriye,Ok,Thanks. |
Ikiriye, please how much is the Samson LNB and where can I get it in PHC? |
obnelly: welldone Ikiriye and Sammu.Among the four or six lnbs i think samson is the best in signal performance.None of the european and american lnbs were able to withstand samson.Based on your research result I still vote samson ,next is echosat.Obnelly, you are 100 percent correct. Till date i haven't been able to perfectly align my Invercom LNB on my 1.8mtrs prime focus dish. Secondly the spitfire, avenger and inverto black ultra are primarily designed for offset dishes. They may not perform efficiently on a prime focus dish compared to an offset dish. The East African FTA hobbyist who have been singing the praises of the inverto ultra black lnb are using more offset dishes than prime focus dishes. We |
olenyi: @George_D. Thumbs up. With dis ur setup, PHCN staff's can go on strike for donkey years for all u care. Awesome!!What is strike? If 10 people from each city join him at the rate he is going, they will render PHCN workers redundant, just like what happened to Nitel workers. ![]() |
George_D with this achievement, you have left our club PHCN Supporters Club ![]() |
Ok, thanks everyone for the accolades. I just borrowed George_D's signature. "Break the Myth, dispel the belief - you know you can!" Phase one completed - Installing a H-H motorized dish. First Myth broken ![]() Second phase materials arrived at my guy's abode. I will received the items around 10-October for testing. C-Band on H-H motorized 1mtr dish
|
@ George I have posted the the installation steps and pictures ![]() https://www.nairaland.com/392635/installing-motorised-satellite-dish-system/1#12250871 ![]()
|
and more
|
more pictures
|
Please accept my sincere apology for not having the installation process pictures. This is due to my camera being damaged by rain water. I purchaed this SuperPower Jack H-H Motor from the China Site that ends with express (I always get banned whenever i type the full address) and received it on 27th December 2012. Unfortunately, installing the H-H Motor became a herculean task, because I had misplace my compass and couldn't find it. In the end, I had to use crude methods to do the installation. I used Google Maps to get my installation site longitude and latitude. Installation Steps: 1. The dish stand was installed and vertically plumb. The dish stand was installed facing south east instead of south, since I'm not too good in using the sun to get direction. That's not too important. 2. I moved the motor to 0 degree using my digital satellite finder. 3. Assembled the Motor and Dish 4. Installed teh motor on the already fixed dish stand and set the latitude to 5.5 degrees (there are two options to install the dish, either using latitude or elevation. Latitude is the recommended option)the latitude setting on this motor is from 0~90deg, so it is good for our low latitude. The motor also has a triangular indicator to enable you set the latitude/elevation accurately. 5. Next I installed the dish on the motor, ensuring the LNB arm and motor are in straight line. 6. Then I moved the motor to 5 degrees East using the buttons on the motor (East, West buttons), best satellite to use is Rascom QAF 1R, TP 10871 SR 16930 hosting the Libyan Mux, it is the southern most satellite. Actually I used Astra 4A (Sirius4) 12605V29950 to do the tracking. 7. I loosened the motor brackets to move the motor on the stand and dish elevation nut to enable me move the dish up and down while tracking. ( you have to move the whole setup, motor and dish together). 8. After I got Astra 4A signal, I then used the buttons on the motor to move the dish to 28.2 degrees East for Astra 2B, didn't hit green, had to adjust the elevation of dish and rotate the entire setup (motor and dish) a bit, got green then I used the satellite finder to move the motor back to Astra 4A did some adjustment to increase the signal strength and back again to Astra 2B to confirm I can still receive the signal. 9. I scanned for channels on Astra 4A and got all the channels then moved to W3A @ 7E, W3C @ 16E, Astra 2B @ 28.2E, W4/W7 @ 36E, Intel7/10 @ 68.5E, moved back to Astra 4A while moving the dish to 7W I noticed a jump in signal strength and quality, scanned the position and got Rascom QAF 1R @ 2.8E, moved to 7W got the NWA Beam, lastly to NSS7 @ 22W. Initially I just moved and scanned satellites without saving positions. Later I saved all positions and now all I do is just change channel on the satellite finder and the motor automatically moves to the satellite position for that channel. To search for satellite all I do is just input the parameters in the Satellite Finder and move the motor in the direction of the satellite, if the signal turns green the motor stops automatically. This position may not be where you have the highest signal quality, so you have to move the motor in steps to increase the signal. The satellite finder is DVB-S, so it cannot decode DVB-S2 signals. All DVB-S2/MPEG-4 channels appear under radio. My HD Satellite Decoder was also damaged by the rainwater. So, for now I'm using the satellite finder until I receive my new decoder with the Avenger LNB and Bracket/Feed Horn for C-Band on a Small Dish experiment. ETA 10-October 2012. This motor though a Chinese product, surprisingly is manufactured with good quality materials. The galvanized brackets, bolts and nuts are better than the dish material, I cant attest for the internal circuitry.
|
Easy023: Pls my ppl,i wnt 2 knw if there's any c-band channel dat i cn track wt 90cm dish.I will soon do a test and inform the house. |
George_D: @microgiant,George_D, if you check past posts, I indicated interest earlier and was waiting for instructions on how to pay. Unfortunately, the next time I logged on the project was already underway. So I had to go solo. |
I placed order for the Avenger PLL321S-2 and spitfire lnbs, but the spitfire is out of stock. So, I'm expecting the Avenger late October 2012. @George, I have tracked 10 Sats with the H-H motor, from 22w - 68.5E using my satellite finder. Unfortunately, my decoder had been damaged by the water. The quality of pictures I took with a nokia phone camera are too poor. I am trying to borrow a digital camera to enable me post better quality pictures. |
Cleanman: can sm1 pls post the kktv TP.The answer to your request is just two posts above yours. ![]() Ameboperoo: Use this tp for Elijah tv and co. 12602v03095 but make sure your signal is very high sha if not it wont turn green even at 65%. |
Hayolad: What is special about this GOTV? Channels are limited and tapped from Dstv, what about if DSTV one day decides to say No, on what stand would GOTV place its subscribers? I think they should have been out independently, come out with new and fantastic channels like StarTimes even if they can't be as good as DSTV. I also think the "List Price" is quite too expensive, N9,500, When I can get StarTimes for 3,900 with even more and better channels. I don't trust this guys.GOTv is the DSTV brand of StarTimes. It is designed to compete with StarTimes. |
I got the H-H motor PowerSuperJack which is a good chinco copy of the one posted by the great enigma. Enigma: Still on the case of Diseqc/USALS motors for low latitudes, I have found one that can do as low as 0 latitude:Misplaced my compass been searching for the past 4 months, so eventually had to do the installation by instinct. first; set motor to my latitude 5 degrees next, moved motor through sat-finder to 5 degrees for sirius 4. Searched for Sirius, then Astra2b moved to 36E got W4/7. moved back to 7degrees for W3A, then 16degress for W3C, finally moved to 68.5E for Intel7/10. |
@Odilibe I'm in for avenger+spitfire+Inverto Black ultra |
@ George, I finally succeeded in fixing the dish on the deck. Pictures will be posted in the motorizing small dishes thread. I will borrow a colleague's camera, mine is bad after being soaked in water for more than 8hrs. The damn leaking has damaged almost all my gadgets, including my laptop screen which is permanently partitioned into two. The dampness alone no get part two, had to warm my remotes every time i want to use them before it will respond. |
This is a deliberate ploy to reduce the number of educated southerners. ![]() |
norrisman: Pot of Life - Omila! Come to me! The thought of that movie still gives me the creeps.Men, this was classic! |
daminho: NESREA doesn't have the mandate to regulate oil n gas industry...but NOSDRA,DPR now you know!!Julius berger must have ignored previous warnings.Do you mean the oil companies activities don't impact the environment? |
isale_gan2: Hmmm. Nope!I always weep when people come here to campaign for IBB |
tayejay: Aside d fact dat power generation is inadequate, distribution is anoda problem whose causes vary frm vandalism, theft,malfunction and inadequate transformers, etc. If d government really want a transformation in dis sector, fixed charges hav 2 b abolished. Although, power units can b made as high as it will b adequate 2 attract investors and also reasonable, so dat d investors know dat they can only make their money wen power is being utilised, so therefore, wen ever there is a fault, they will as a matter of urgency make repAirs and provisions of transformers will b done rapidly. [b]But wit d fixed price, an investor is will only made to gather money not deserved several times especially wen power is not supplied at all, [/b]dis will not encourage efficiency on d part of d investors because they already know, distribution or not. They still hav moni 2 make. And on d part of d consumers, being charged unfairly, especially in situations where u rarely get power 2 use and u still hav 2 pay some moni as fixed charges, will promote vandalism and all sort of malpractices jst 2 make up 4 d unfairness, even though its nt justifiable. Then. Government will yet fail in achieving its goals, but perhaps dis tactics by government may jst b 2 enrich some of its allies.Men, that's a nice investment option . Connect people to the grid and collect my cool N500 bucks monthly. ![]() |
The exchange rate was N1 = 1Pound = $2. Level 01 worker earned N128 which was equal to $256 Then came IBB and IMF insisted on devaluing our currency. The naira was devalued to N10 to $1 Salary was increased to N350, workers danced over the increment but later discovered they have been short changed. 350 was exchanging for $35 in import dependent economy, that is when real poverty started. |
mummy3: I have just remembered somethingIt was definitely better before SAP, trust me. |

I will do a comprehensive test today after work to confirm. The TV and STB are not affected as I always unplug them from the mains and disconnect the RF Cable daily as a precaution. Lightening in Warri is something else.



