₦airaland Forum

Charisdesigns:
This is purely for educational purpose, processing fee is been revised “increased “every now and then.

Pic1 one is an assessments as at March this year

I received pic2 just 2 weeks ago.

Charisdesigns:
Hello sir, this calculation can’t be seen as right amount except if something as charge since last year. Especially the estimate of S.E.C it way to much. May be other people that apply for approval within last year can tip in their experience. Location matters I no this because I have one in those locations that State considers charging prime rate. Please don’t let us scared people away from doing the right things because of cost.

I am glad you like.

As a matter of fact, if one is building a kobo kobo project, I think it is economical to do a flat roof.

See how the processing fee for your building plan approval is been worked

L X B X H of Building x MF

(L X B X H of Building x MF stands for the length , Width and height of the building)

(MF means Multiplying Factor for the location of the Proposed Building from foundation to roof top of the Proposed Building.)
Different Areas have different MFs.

Charisdesigns:
I am glad you like.

As a matter of fact, if one is building a kobo kobo project, I think it is economical to do a flat roof.

See how the processing fee for your building plan approval is been worked

L X B X H of Building x MF

(L X B X H of Building x MF stands for the length , Width and height of the building)

(MF means Multiplying Factor for the location of the Proposed Building from foundation to roof top of the Proposed Building.)
Different Areas have different MFs.

Charisdesigns:
I am glad you like.

As a matter of fact, if one is building a kobo kobo project, I think it is economical to do a flat roof.

See how the processing fee for your building plan approval is been worked

L X B X H of Building x MF

(L X B X H of Building x MF stands for the length , Width and height of the building)

(MF means Multiplying Factor for the location of the Proposed Building from foundation to roof top of the Proposed Building.)

Different Areas have different MFs.

So therefore, when you have the send down the rain roof, you are sending down more money to the government.

diordaves:
So you true true bury live dog for your house say you dey exterminate termites? What a wanton animal (human) cruelty. And you can confidently publish this crime online. Africa!!!

The road still far if purported educated folks like yourself believe in animal human sacrifice in 2021. The road still far!!!

EgunMogaji2:
Termites.

If it were my house then I would be using Sniper.

EgunMogaji2:
It’s for safekeeping

EgunMogaji2:
So you’re even in Ibadan.

You have to wet the floor for the elders at Inastraight. I’ll take Hajji’s portions too

n3xt:
I understand you perfectly sir.

You don't want to commit huge resources into a market which is largely unregulated. Looking at the picture shared, Lasisi will tell me "Oga, let's use the same packaging as the one that people buy more on our product."

The next thing, you'll start seeing "Ikia Kitchen" or "Ikear Kitchen" or "Ike A Furnitures" or "Ike Anobi..."

megacontrol:
Hello guys,

I’m looking for good quality external wall tiles that can stand the test of time.

Pls indicate if you have any of these and state your prices per cartoon, sizes and quantity per carton.

Thanks

InvertedHammer:
/

The world is reversed. Oyibo pay premium price for things done manually. We pay premium price for things done by machines. Why? Because our artisans do not pay attention to details. I watched a tutorial on sanding. They narrowed it down to the directions of standings and effects on the finished products. We lack such details and finesse.

Some of you make graduate employees envious with how much you make in a month. But instead of reinvesting the money to perfect your trade, only God knows what they do with the money. I suspect sugarbabes, marrying another wife or outright "dorime" in a nightclub.

By the way, the tools are relatively cheap.
/

twinskenny:
baba it depends o ... met some guys in lekki they have some fantastic tools for cutting and all.. they charge like 2800 per sqm labour only.


but i think the average cost is around 500 to 800 depends on location and negotiation power

michlins:
get me tools to make sanding easier. I will pay for it. Thank you

michlins:
the tools are very important. Up till now,we still do sanding manually.


But with the tools available, we're doing quite well.

Inception:
Funny enough, the manufacturing process is very simple. More like how steel panels are manufactured in a car assembly plant (closed die forging)

The downside is that initial set up and tooling cost is prohibitively high. and high demand must be assured to be profitable.

At a time i was seriously thinking of designing and building a CNC plasma cutter (with a cutting table of 2.5mx 8m ) to offer metal design cutting services but Naija wahala no gree me

michlins:
it will take more than materials to keep turkey doors off our market. From the tools, to the skills and branding. We still have a long way to go but this is a step in the right direction

spyder880:
Yes, East of the Niger, Cutix has been reigning as the undisputed champion in cables, nearly 40 years and still going strong.

gbadexy:
I started with fire retardant paint production through partnership with foreign companies and they gave me the necessary technical support.
I had formulation for different types of paints and when intercolor was among the very few supplying basecoat which they import then, I was already producing and supplying basecoat.
I met and discussed with some well known paint brands to partner but it didn't work out and when the demand for the fire retardant paint was low, I switched to regular paint since the materials are mostly the same without the active components.
I got some former workers from paint companies to help produce with my formulations and tried local sourcing of materials.
When I started producing satin paint over a decade ago, most of the budget range paint companies don't produce them. Only the big brands and agents importing the american brands. That was how I got to have my satin and eggshell substituted and later replaced with the foreign products by a marketer of the company importing them to her network base.
I produced for N2500 per gallon she later convinced her clients her brand is equally as good at slightly lower price and they have been using it for sometime already. A gallon of behr, benjamin Moore and ralp Lauren they sell was N8000 per gallon then.
I think I could say I was foreign trained and my biochemistry background helped to some extent.
I could still formulate paints with uncommon features in Nigeria market.
I bet you don't get to see wax based water repellant paint in the market.

harriswayne77:
Brick slips offer a perfectly rustic look for most Interior design situations. Whether it's a living room, bedroom or dining room feature wall, an alternative for traditional kitchen tiles or an external cladding project, Kuci brick slips offer a sensational and eye-catching look that will be the envy of your friends and family. Brick slips can also be also known as thin bricks, brick cladding, slip bricks, brick effect tiles, brick veneers and brick tiles

sonnie10:
So a duplex project of about #50M is built on owner provides materials terms. The contractor would need planks cut into a 9 inch for pouring of lintel frame concrete. The issue now is that contractor wants owner to go to sawmill and do the cutting and bring to him since it’s part of materials agreed to be provided.
Owner is insisting that woods come in standard sizes and any technical modifications must be done by the contractor.
In small construction jobs, other minor details would emerge during execution which was not initial part of the standard agreement like the screeding you mentioned.
Not that both parties did know about those variations but they only choose to assume that it is the other persons responsibility.
Detailed communication and transparency is key in building relationships.

Dominionng:
POP precast ceiling is totally different from Sheetrock.

Image1: Sheetrock during screeding

Image 2: Precast POP after screeding with laser cut

Image 3: Precast POP after screeding

Image 4: Sheetrock after screeding

Dominionng:
233 x 6,000

= N1,398,000

Covers for your precast ceiling with screeding of the CEILING.

IF you are worried of the quality of the job, a trusted member can volunteer as an escrow, and funds will only be released when is completed and verified.

Your precast POP ceiling comes out BETTER when screeding is applied on the ceiling, but the above quote doesn't have screeding materials included.

mufutau55:
Yes. There is Allcopacetic, Topsy23, and Jaffos (Jaffos is not on NL, but my private cable guy). You can order, pay them because they are Agents and pickup from respective factory of Nigerchin (Ikeja) and Coleman (Mowe). This is done for authenticity , so as not to get fake cable.

Note: You get it cheaper from Agents than going directly to buy it at the factory. The Agents get more discounts.

Hajji M.

SurveyorGeo:
There is coastal road, that will run from Ibeju Lekki to badagry

n3xt:
Even though I’m working on that axis right now, I’m really not following the coastal road project any longer... but all I can say is the project is in the preliminaries. They’re still dealing with encroachment and realignment.

I hope this get completed in the next 2 decade. The Lekki/Epe expansion that got started almost 2 decades ago is still not completed

BrabusNG:
Sorry sir, Coastal Road is different from Coastal Railway

BrabusNG:
Sorry sir, Coastal Road is different from Coastal Railway

BrabusNG:
Baba Kopell, this might interest you about Lagos - Calabar coastal road.

You can read more on blackerboardbuild.weebly.com

n3xt:


Just as I shared earlier, where there are no standards I become the standard.

Setbacks act as buffers and protection against flash floods in my personal abode. I have large space for utilities. My fish pond alone is over half plot of land so space is not an issue for me.

In my own land use ordinance , setback is the minimum distance which my building must recede from the street or road, river, flood plain, or any other place which is deemed to need protection.

- The setback from my building to Lafarge Plant in Sagamu (where blasting activities occurs regularly) is about 1.8km.
- The setback from my building to the stream we recently dredged is over 50m
- The setback from my building to established beacons for the proposed Lagos-Calabar railway line (I heard there's realignment) is over 500m

One thing I can guarantee you is that if you dig my foundation this morning despite the heavy downpour in the week, you'll still find dry soil. I was intentional about my build. I don't have energy to fight and my mental health is important to me so I do what I got to do to prevent my kobokobo investment

________

That's why I went for cheap land in area where I can do anything I like without crying when I was going to make my decision to build.

somehow:
This is why I get extremely angry when he does not respond on time when I ask him some questions or ask him what he intend doing for the day, the next day or for through the week on the project.

Most times I get blanket response. All in all, if I employ you as my contractor, you should not expect me to still be doing a contractor's job. .

I have tired, taking my leave.

Dooooooo:
Value Paint said 2 to 3 months.
Really? I have never heard of such. I have never seen such.
So far, we apply the roofing sheets immediately the wood work gets completed.
I will need to be educated on why roofing wood work needs to be left for a month or more before covering.

Uncleteeh(OAKGroup)

n3xt:
1996 - date should be about 25 years ago.

Lekki Scheme II was conceived 25 years ago and there has been infrastructure development there since over one and half decade. I mean solid road and drainage to individual plots.

I did several projects there (several years ago) that I've showcased here. It's not a fix-along-as-you-build type of development.