₦airaland Forum

customised87:
How many bedroom is this please?

4 bedroom

KolaShangOne:
If you’re doing just 2 inches, you will use about 20-25 bags only.

Thanks boss. I appreciate

segzy14:



2inches is not good enough.

How many inches should I be looking at

mrsteel:
Have u raised the building above DPC already?
Because the thickness of d flooring is most times not defined when building is above DPC before flooring

Yes I have raised it up to two blocks above iintel

Muyi002:
Hi good people,
Please I want to know a rough estimated bags of cements that will do the flooring at 2 inches of this building. It has been raised to 3 blocks after Lintel. I want to do the rooms flooring. See attached.

Please some to my rescue. Number of bags of cement to deal this flooring of all rooms at 2 inches high

Hi good people,
Please I want to know a rough estimated bags of cements that will do the flooring at 2 inches of this building. It has been raised to 3 blocks after Lintel. I want to do the rooms flooring. See attached.

diordaves:
Nice job. Good workmanship. Really looks well built with a lot of thoughts gone into it.

One big thing though, if this was my built, I will 'close eye' and add a third coarse to the levelling. That is three coaches after lintel. Why? If the finishing include POP, you will not believe the dramatic positive impact a high ceiling will do not only to the choice of POP design but the living experience of the house as a whole. Visitors will step into the parlour and will experience the majestic feel to the house. This is due to the the brilliant white POP finish accentuated by the very high ceiling. You don't get this feeling with low ceiling houses done up with PVC ceiling. This is just me speaking for myself and wishing this is mine. If only wishes were horses, beggers would ride.

Thanks man.
It's actually three courses block after lintel. All blocks after lintel from the inside is 3 course while the outside is 2 with parapet beam cast to make it 3. See photos of inside.

Actual Expenses Incurred per Stage
Labour Cost for Foundation Excavation, Blinding and Block setting to Lintel = *180000*

Blinding
Cement - 30 bags @ 2500 = 75,000
Sharp Sand - 20 tonnes = 32,000
Granite - 25 tonnes = 105,000
Total = *212,000*

Foundation Block Setting & Sock away Pit
Blocks = 1400 @ 150 = 210,000
Cement - 30 bags @ 2400 = 72,000
Sharp Sand =15 tonnes = 24,000
Labour for Soak away = 62,000
Extra Labour Expenses = 20,000
Total = *388,000*

Foundation Filling
Labour = 72,000
Laterite = 298,000
Total = *370000*

DPC - Half
DPM Nylon = 11,500
Granite= 10 tonnes = 45,000
Tara = 10 tonnes =13,000
Sharp sand = 10 tonnes = 15,500
Planks - 25 pieces & nails = 25000
Iron
16mm - 4 lengths @4400 = 17600
8mm - 3 lengths @ 1250 = 3750
Binding wire =29000m
Transport = 2500
Workmanship
Labourer = 40000
Welder and carpenter = 13000
Cement = 28 bags @ 2500= 70000
Wire Mesh = 10500
Total = *273,000*

Above Lintel Block setting
Blocks 4100 @ 150 = 615000
Water = 3000
Sharp sand = 36000
Joining sand = 18000
70bags @2500 =175000
Additional labour = 50,000
Total = *900000*

Lintel and Pillars
16mm - 8 lengths @ 3630 = 29040
8mm - 31 lengths @ 1030 = 31930
12mm - 34 lengths @ 2050 = 69700
1 binding wire = 4000
Transport & logistics = 4000
Total cost of Iron = 140000
Wood and planks ➕ TP = 51000
Granite = 25000
Sharp sand = 15000
Cement = 30 bags @ 2500 = 75000
Workmanship
Labour 40000
Carpenter 22000
Iron bender 17000
Total = *385000*

Overall Total to this stage is 2,710,000

Bhury:
[left][/left][right][/right]

Hi,
Of course, 12mm iron rod is good for Lintel with a 8mm used as rings.

Muyi002:
Hi Guys
Please comment on the cost of workmanship below for a 4 bedroom flat, ensure. See drawings attached.

Bricklayers
230,000 = cost of digging foundation, blinding and block setting from foundation to 3 courses after lintel (soak away pit inclusive 12ft by 10ft by 12ft deep) Total of about 6000 blocks
40,000 = cost of half DPC
40,000 = cost of lintels and pillars

Carpenter
Half DPC, pillars and Lintel = 30000

Iron bender
Pillars and Lintel = 22000

Please am I good with this prices

rotecch77:
In construction what you show here is real DPC
This can be done with special engr mortal or concrete, polythene or metal to resist water capillary action (dampness in building).it just that the thickness is usually not as thick as the pics you show above

The so called German floor is called OVER SITE CONCRETE. The two has diff purposes.(dpc and over site concrete)But many people mixed the two name together.

Pleae assist with the different purposes.

Rubbiish:
Which one is half DPC sir?

Something like this in the attached.

Hi Guys
Please comment on the cost of workmanship below for a 4 bedroom flat, ensure. See drawings attached.

Bricklayers
230,000 = cost of digging foundation, blinding and block setting from foundation to 3 courses after lintel (soak away pit inclusive 12ft by 10ft by 12ft deep) Total of about 6000 blocks
40,000 = cost of half DPC
40,000 = cost of lintels and pillars

Carpenter
Half DPC, pillars and Lintel = 30000

Iron bender
Pillars and Lintel = 22000

Please what of something of this nature in the attached?

Dubemcapital1:
Sure! House without OSC are reasons why tiles of some buildings are actually losing their grip I mean the tiles seems to be caving down or gradually losing themselves from the walls.

Again, German floor stops water from the bathrooms tiles percolating below the foundation.


Therefore, having a German floor or over site concrete done in your building is very good and cheaper comparing its importance. (For me its a must do)



Dubemcapital

My Good morning people.
Trust we had a good day yesterday.
Please I am seriously considering my financial status but still wants the best.

Parapet vs No parapet

What are the pros and cons.
This is where I am now at. I am considering casting the beam and roofing or casting parapet before roofing.

My pocket will tell.

Good Morning correct People,
Please a friend of mine wants to commence his building and he wants to do foundation blinding. He was given quotation for gravel but I told him granite is better is better. His issue is that gravel He cheaper compared to granite.

I am trying to convince him to use granite but he wants to know the implications of not using granite.

Kindly assist with the comparison for both so that I can advice him.

Hi Guys,

Please i need assistance with respect to the description and sizes of the wood in the attached.

I greet you guys.

Please some one should assist with the [b]names [/b]and [b]sizes [/b]of wood in the attached

Hi Good People

Please assist with the [b]names [/b]and [b]sizes [/b]of the woods in the attached.

yinkaoke:
At muyi002
Ur pics is like 2 pits. Are they both septic n spakaway? Is there measurement same?
Was there any reinforcement, use of iron rods? Or is there a need.
Also is it advisable to do it at d back of d house or in front. Just asking oh

the Size i quoted is the total size of the soakaway.

based on your usage, you can liaise with the bricklayer to divide it for you.

Muyi002:
Please Boss, what is the length of the design rod (i.e. blue arrow) nd what is the distance between these rods (blue arrow).

@KolaShangOne:
I still dey wait o.

saydfact:
Less than 20k would do the job...

I concur with this. I used to know that for each block is between N30 to N40.

yinkaoke:
Thanks @ muyi002
Please is this both septic n spakaway?
What is the measurements please?

Mine is 7ft by 11ft by 9ft deep and it is for a 4 bedroom flat with no water going outside the house. all water channels go in the pit.

yinkaoke:
Good morning great people. Please l need advise
1. How much do l pay my mason to raise 300 blocks above my lintel?
2. I was advised to dig my septic n soak away n use d dug out sand to fill my foundation. But my worry is that l am not ready to work on d septic n soakaway until l get to plumbing work next year. So how safe would d open septic n soak away be.as l am concerned is it normal to dig n leave it open until am ready.
Thanks all in anticipation of ur advise

The cost of is dependent on area. Mine which picture is attached was done for 180k (this include cost of digging foundation and blinding the foundation). This is an agreement I had with the bricklayer at inception. Cost of half DPC is not part of the 180k.

Soak away digging would help you for filing. Soakaway after digging should not be left without putting blocks and making the blocks formidable by putting) concrete in the holes till it gets to the bottom. This was what I did and my Soakaway has been like this since June this year and it is serving as where I put water. See attached

Johnadelaide00:
Please house, what is the cost of suspended ceiling per SQM

This also depends on area. Ilorin here, it is 1700 per sqm if it is the ordinary board and if it is the suspended POP, it is 2500 per sqm.

This includes the iron used to iron used to hold the suspended stuffs labour cost is 200 per sqm.

Dennis3D:
Hello House

I need response to this...

*Material is how much per square meter*?

*Labour is how much per square meter for POP work only. Average Design.*

Thus may depend on area and thickness of the POP. Like my area in ilorin, the average price is 3500 per sqm

How much do you sell

KolaShangOne:
Ready for casting

Please Boss, what is the length of the design rod (i.e. blue arrow) nd what is the distance between these rods (blue arrow).

saydfact:
Hi... The irons are about 750mm long and in this particular pics, the spacing is about 450mm apart.

Size of iron can be 10mm or 12mm.

Good luck

Baba Saydfact,

You are a blessing.

Thanks man

Muyi002:
Just the length of 1 blue iron is what I intend to know. I.e. how many inches is one

Please I still await response. It is to help in calculation.

Thanks

Rubbiish:
Do u mean d number of rod lengths required for d blue colour? It can only be determined by the length and breadth of d building. But i will strongly advice u get someone to supervise and handle the parapet work. Because u will need a professional to supervise it. All the reinforcements need to key to avoid failure.

Reinforcing a parapet work requires supervision, most of these iron benders will tie the rod anyhow just to get their money. Only a supervisor will ensure all the reinforcement works are properly keyed. I strongly advice u get someone that has been into it.

Just the length of 1 blue iron is what I intend to know. I.e. how many inches is one

Thanks Alhaji Mufutau.

I will go with the squared 8mm ring with 12mm placed inside.