₦airaland Forum

Bejusttoall:
Thanks for the reply

To price boq for tendering

I can price or prepare detail electrical and mechanical bill of quantities for the project

Bejusttoall:
Good evening all.
Please I need a QS in Ibadan who will partner with me on bidding for contract

What will be the role of the QS on the project

abuiltech:
Those are not fittings in plumbing, fittings are elbow, tee, sockets etc, while WC, basin, bathtub etc are sanitary wares

Sanitary fittings

COLEMAN cable manufacturer is planning increase price Any moment.

Be informed

Icecream4U:
Please, should I do the plastering of my bungalow before plumber work or it's plumber work before plastring?

You need to run both water supply pipes, soil and waste pipe before plastering since you are doing conduit .

Also electrical first fix must be done before plastering, I mean conduits and the boxes.

Happy Sunday to you all .. we are here for your cables . Chat or call us

Good morning and happy weekend

Don't forget to contact us for your MEP Design and installation. You will get the best from us

twinskenny:
ha baba already responded o

Here in front of your questions



Are you into smart homes too? Yes sir
2) the Cctv, does it cover motion sensor? Yes motion sensor
3)the video door bell, will it be at gate also?yes it will be at the gate with talk back ability
4) if the fire alarm sounds, will it trigger an automatic response like a sprinkler system or something? Automatic sounder yes

Fire alarm can only trigger FM200 not sprinkler

Sprinkler head glass bulb will only sense the temperature and burst, then the pressure line pipe release the water when there is fire outbreak

Chapmanovie:
please plumber just gave me this estimate for a 2 bedroom flat all en suite with one visitors toilet hot and cold..... I am shocked as I have read it doesn't cost this much and its in Benin not even Lagos or abuja and the labour cost is not included he indicted for cracking ,piping and to the septic tank...and indicated labour 50k

I want to confirm, is it using 2ich pipe for the VENT or 4inch pipe ? What is the size of the external block wall 9inch or 6inch, If it is 6inch 3inch pipe should be used and if it is 9inch 4inch pipe should be use. There is no need of reducing socket .

abuiltech:
Although with 5nr of 2x 4 sockets on this list, it seems to be on the high side it should be 3nr, kindly share your floor plan drawing and site layout to detailed check

I want to confirm, is it using 2ich pipe for the VENT or 4inch pipe ? What is the size of the external block wall 9inch or 6inch, If it is 6inch 3inch pipe should be used and if it is 9inch 4inch pipe should be use. There is no need of reducing socket .

Call us today

n3xt:
I don’t think so. He was different and that’s something the system doesn’t want.

The system want to spend 30 years to build Lekki/Epe expressway but Ambode want to deliver Epe, Agege, Oshodi, Iyana Ipaja roads in less than 24 months. There’s no way the system will like such a man.

Just take a look at Epe city and many other Ambode verifiable projects for instance. Don’t you like what you see?

For the records, the collaborative govt of Lagos state has been building the heavily tolled Lekki/Epe expressway since the days of Tinubu and we are not even half way.

Ambode tried just that he sideline all the L.G.A Chairman. He would have change Lagos to new look

twinskenny:
We are jumping on this one in Lekki

Thanks for the client who referred us…
32 units multidwelling apartments (strictly service apartments)

Electrical, Cctv, video door bell, fire alarm & intercom

@topsy23 we will be working together on this one regarding building of panels

Yeah as discussed .

folmus:
@topsy23,

Thanks. Items received.

You are welcome sir.

Thanks for doing business with us

Born2conquer:
Building a standard house is not easy! May God make it easier tor everybody building.
1)Payment for architectural design
2)Payment for MEP
3)Payment for Survey
4)Payment for Cof O
5)Interior designer will also charge to draw 3D
6)QS money
7) Engineer money


All these no follow the money required to start building gangan.

Building a Standard building without omitting a protocol is not easy

Yes not easy to get everything done without missing any of the above protocol. Some paid millions for above listed because they will not allow them to start anything without having all the documents above

Born2conquer:
What’s MEP and how much will it cost and what’s the benefit in getting the approval

MEP maeans

M - Mechanical (HVAC OR AC)
E - Electrical
P - Pipe services (PLUMBING )

Price depends on size of the building.

TEQ365VENTURES:
Good evening ppl I have a project going in ogun state and would love to know the processes involved in getting plan approval. Already I have the structural and architectural drawings would love to know if these are enough to apply. Thanks

You need to get the MEP design also with COREN seal. You can contact us on Whatsapp 08033643191

neduboo:
Omonile is frustrating me in my site. Those who used to be there are no longer there and they new guys are frustrating land owners erecting structure in my area.

They are asking to see my papers but if I show them I know they will still find a fault. Then they will begin to quote millions for me.


I'm so tired and Confused

You need to get in touch with seller. Hear what he will say

Born2conquer:
Interior designs is all about creativity. See this pop/plaster board design with the wood flooring

Amazing!

Finishing should not always look luxurious, a HOME should feel like a HOME, When your home feel like a home… you won’t see any big deal in lodging in hotels (except for meetings
or when you travel to another state)

The design look good

EgunMogaji2:
Me I don comot hand for bornin pikin, na my account balances dey give me erection every morning. And it never fails.

Lolzz that means if there is no money the thing will just be at state of rest

Good morning, heavy down pour in Lagos this morning. The whole road is flooded

Call us for your cables today

PAPAFEELERS:
Please how much is the cost of an armored cable wire per meter/feet etc.

What size of armored cable wire can i use to connect eletricity from the feeder panel on the road into my house?

Going rate in the market.

Cc: Topsy, Rotech, Spyder88,NEXT.

25mm 4-core armoured should be enough since it's a 5bedroom duplex.

Also the distance of the feeder pillar to your house is unknown. We need to consider voltage drop

Jasobry:
By God's grace,I intend moving into my kobo kobo house in few weeks,as my rent will be due. But with the aim of going green with solar inverter, please advice on best to purchase.

Congrats sir,

Forbyhe solar inverter. The best in the market is XANTREX from Schneider, SMA but they are very expensive.

You can go for luminous brand

fabulous85:
Hello topsy, pls what thickness of recline cable is required to tap electricity from the NEPA pole. It's a 3 bedroom bungalow with 5AC'S and 4 water heater thanks.

25mm reclun is okay

Call for your DB

micgray100:
YOU FORFATHERS ARE BROKEN BERGER.... SEBI IS NOT YOUR MONEY INVOLVE... I HAVE GIVEN JOBS TO MEMBERS HERE ON THIS FORUM RUNNING TO MILLIONS... AND THER DELIVERED... I AM NOT A BERGER LIKE YOU THINK... I CAN PAY YOUR SALARY FOR 3 YEARS CONVINIENTLY...THAT PROJECT IS MY PERSONAL THIRD HOUSE IN LAGOS... WHEN IT COMES TO VALUE FOR MONEY... I AM A PATIENT MAN.... BUT WHEN IS TIME TO TALK ... I TALKKKKKK...


I WILL WAIT TILL IT GETS TO YOUR TURN OF FAILED PROJECTS

Pls let allow peace reign in this forum

n3xt:
Go the traditional way. Bury a dog on your site.

It worked like magic for me! It sent termite colony away from my neighbourhood.

I was told sometimes back that bury of live dog is the solution

PAPAFEELERS:
Please how much is the cost of an armored cable wire per meter/feet etc.

What size of armored cable wire can i use to connect eletricity from the feeder panel on the road into my house?

Going rate in the market.

Cc: Topsy, Rotech, Spyder88,NEXT.

How many bedroom do you have?
Number of AC and water heater is also require to determine the the size of cable

Also, what is the distance between the feeder pillar and your building so that we can factor VOLTAGE DROP into it .

Thanks

sinorte:
1. Please revalidate these prices
2. What's your office location?
3. What mm of the Recline load wire will be suitable for 4-bed duplex?

Pls can we chat on Whatsapp because there are some questions I need to ask.

Again in the electrical list there is no 2.5mm, 4mm cables

The 200A knife changeover switch is for what?

Remember knife changeover switch is single phase and not 3-phase

The 100A changeover switch is for what?

How many AC do you have, how many water heater do you have. Do you have inverter or solar system ?

All these is require for the main load cable.

You can contact me on
WhatsApp number 08033643191

On going project

On going surface pipe work