AldrichAmes:




You're obviously an ignorant turd and a poorly educated kid.

1. Saddam Hussein

The making of Saddam Hussein by the CIA: A Tyrant 40 Years in the Making https://www.nytimes.com/2003/03/14/opinion/a-tyrant-40-years-in-the-making.html

U.S. Secretly Gave Aid to Iraq Early in Its War Against Iran: https://www.nytimes.com/1992/01/26/world/us-secretly-gave-aid-to-iraq-early-in-its-war-against-iran.html

Revealed: how the West set Saddam on the bloody road to power: https://www.independent.co.uk/news/world/revealed-how-the-west-set-saddam-on-the-bloody-road-to-power-1258618.html

^There are loads more to unravel/unpack but I'll stop there for now. If you can read, that should give you an inkling on how Saddam was armed to the teeth by the US and UK with American and British weapons. Saddam only switch to Soviet weapons after they discarded him and Iraq was under arms embargo. And he couldn't even get a lot of direct lethal Soviet weapons. So most of his lethal weapons were American and British made and those weapons were effectively grounded due to lack of parts caused by embargo.

In essence, Saddam was basically disarmed before Iraq was invaded by the US in 2003. Anyone with a brain (which you obviously lack) would know that.

2. Middle East is basically the US' playground. Israel is like a mega US aircraft carrier with almost 10million people. The US has bases with tens of thousands of troops stationed in Oman, Kuwait, Qatar, Jordan, Saudi Arabia, Bahrain and a massive military base in Turkey. So, the US can basically put a million troops in Iraq within 24hrs without the need to mobilise. Russia on the other hand, despite being next to Ukraine would need to mobilise to be able to put the same number of troops in Ukraine because its military isn't a wartime military. Again. you have no clue and you're a slowpoke who understands zilch about the military.

3. Nazi Germany didn't take Britain because they didn't want to and never even committed their strongest troops to taking Britain. The attck on Britain was mostly a feint and Hitler's eyes were on the Soviet Union hence he committed about 90% of his elite forces against the Soviet Union. If Hitler wanted Britain, it would've been a walk in the park but he didn't really pursue it for the following reasons:

a. PM Chamberlain already cut a deal with Hitler by giving the Nazis Czech republic with the Munich Agreement (before Churchill got to power). There was also some sort of connection between the British Royal Family and Hitler.

There's a reason why the US and UK absorbed the Nazis rather than destroy them after the war like the Soviets did. And Nazis preferred surrending to US and British forces than Soviet forces. Heck, Nazis founded NATO after WW2 and a lot of American secretary of state post- WW2 have Nazi lineage.

b. All the resources he needs to achieve his dream are in the Soviet Union. Britain has no resources. Nazi Germany was also part of the capitalist bloc while the Soviet Union was an opposing ideology with communism.

c. Taking Britain would've got the Americans involved (the US was neutral at this point). And that would've made him compromise the amount of elite forces he committed to the eastern front against the Soviets which would've been a disaster because he sent all his elite forces to the eastern front against the Soviets. Alas, it ended up being a disaster because the Soviets destroyed all his elite forces.

^I'll stop here because history is way deeper than what a lot of you know. You have to read extensively to know a lot of things.

4. LMAO. In the next 20yrs, American paratroopers wouldn't be able to pull off what the Russian VDV paratroopers did at Gostomel airport. Even American veterans alluded to this on Twitter. 200-300 paratroopers against 3 elites Ukrainian brigades and hundreds of NATO special forces and they held the Kiev airport from Feb.24 until other Russian forces got there and never lost it in any battle until they withdrew. And less than 30 of them were killed. That's one for the history books. Those VDV paratroopers are the ones crushing Ukrainians in Donbass right now, lol.

This is a video on CNN when CNN reporters went to the airport a few days after the paratroopers took it and Ukrainians lied that they have pushed them out, lol:
https://www.youtube.com/watch?v=b40r8RX5MoE

He rushed there thinking they were Ukrainians because Ukrainian propaganda lied that they pushed them out. Only to find out that the VDV badarses were still in control, lol. And they never lost it. CNN basically exposed Ukrainian propaganda in real time.

5. RQ-7? . No, Iranians captured US RQ-170 stealth drone with EW. It's the most advanced US drone that Americans claimed were invincible/invisible and Iran captured it with EW without breaking a sweat. So none of the trash you posted is a match for the Russians and Chinese.

6. Moskva was hit by a sea mine - not Neptune missiles. Even the most rabid pro-Ukrainian shill on Twitter who're veterans said it's not Neptune missiles because nothing on the ship showed it was hit by a missile. And that corroborates Russian claims.

7. What's AWC? Or you mean AWACS? Well, US AWACS are mostly overrated and Russian EW jams it often.

Anyway, this isn't about AWACS - it's about American MQ-9B drones. So read what Russians did to Americans in Syria from an American general below:

The US has been concerned by the battle-field success of Russian EW systems. At the U.S. Geospatial Intelligence Foundation’s 2018 GEOINT Symposium, General Raymond Thomas, then commander of U.S. Special Operations Command, said that Syria has become “the most aggressive E.W. environment on the planet. They are testing us every day, knocking our communications down, disabling our EC-130s, etcetera,” he said without directly mentioning Russia.

There have been reports in the US media that Russia has been blocking small U.S. surveillance drones from receiving GPS satellite signals.
https://www.defenseworld.net/2020/02/03/russian-electronic-warfare-system-brings-down-hostile-drones-in-syria.html

-------

I'm done. You're out of your depth like most of the clowns on this forum. Most of you just parrot utter nonsense without an understanding of anything.

kmarerin:
Sun King does PAYG Solar. Thinking of launching your own startup? Let's help you build in record time.

chibatov:
I paid in $$ but on jumia it goes for about 160k to 200k. Highest 250

HarrierJumpJet:
Nawa ooo.
All these banks don cast..
Which kain country be this one sef.

Access bank....... Casted
Gt bank ....... Casted
Stanbic ibtc..... Casted
Fidelity............. Casted

I want to order something of 30 dollars now but because of these banks, I can't.
If I use barter now, something that is supposed to cost 12k on AliExpress is going to cost 18k
I nor just know wetin to do again sef.

HarrierJumpJet:
Once you're born in Nigeria, you are disadvantaged already.

Vahyela:
Greetings to the Gurus...
I have a centurion automatic gate which I always find it difficult to use due to lack of Electricity(we all know what light has become in Nigeria now)
please I want to know the material needed to use Solar. I.e. The capacity of the Panel e.t.c
The battery is 12V 7.2Ah
I already have a solar controller.

Olaoptech:


Gomoney is still $100 monthly

ceaser:


No sir. It isn't.

Olaoptech:


Gomoney is still $100 monthly

BuhBye:

Isn't gomoney $100?

jboixxx:
[color=#0000ff]Open dispute for a package sent to a wrong location? Even without you asking for rerouting, once it gets to gusau, they'll reroute it.

And erroneous routing isn't only NIPOST thing. [/color]

mcTrinity:


The bolded are so very untrue sir...

We need to learn to buttress some points here without outrightly condemning some methodology here; especially methods that have worked and IS still working.
It is true that using MC4 connector is a very fine and commendable method for joining external cables to panel own.

It is also true that cutting off the panel cable and joining by twisting can cause some or all of your points, buy that's not always the case. You made it sound general. After all, whether you want to believe it or not, people have used MC4 and ended up with more wahala of no-contact or using inferior connector, which also results to some or all your points too.

EVERYTHING depends on quality of material used and skill of the installer!!!

Over 7 years, I've installed so many hundreds of panels and I never, for once, use MC4 connector for any installation. And for 5 years plus, I've ALWAYS handled all connections myself untill I was sure my guys can do it satisfactorily to my standard. As a matter of fact, only one of my guys can do that and he's the only one that can do connection aside myself.

I did installation for one client.. 5 years later, while he was changing his batteries, he decided to add more panels. During the upgrade, the told me he noticed I cut the cables and that he would like me to use MC4 for the upgrade; that he's heard about the concerns you just pointed out. However, I asked him if his panel performance has dropped at any time, and he said no.
However, I took him to the old connections and I gradually removed all the double layer insulations on ALL joints and I asked him to see if there's any form of degradation. Bros, all joints were still much intact. The insulation tape didn't degrade. The cables were still looking good; none was looking dark or corroded.
That's how the man allowed me to do my thing.

Now, I'm going to explain how exactly I do my connections using pictures. Pictures attached were taken 2 years ago, which I use for classroom explanations during my Training sessions. Follow the pictures according to the numbers.

The only thing I want to add is this; most twisted connections have issues because most installers lack the skill and patience of proper cable joining. I've giving opportunity to some electricians and their twisting and insulating mannerism is just very local and road-side.

Referring to the pictures, after twisting together the strands in Pic 4, I first use an "A Grade" flame retardant white insulation tape for the first taping (pic 5) I buy this tape at N750 at ShopRite. Then I use an original Scotch tape to do the 2nd and final taping (pic 6). See pic 8 for the tapes

You can't use all this N50 insulation tape and won't expect it to untape (or unwind) as times go on. And during taping, ensure you tension the tape.

For the exposure, I always ensure I tie cables to the rail, and I ensure all joint sides are directly covered by the panels. Sun or rain, none would near it.

So, guy, there's absolutely nothing wrong with cutting off and joining. As long as you use the proper and professional method or joining. Even the National Electrical Code (NEC) and British Standard Code still have joining methods with different methodology like T-method, Married method etc... People should learn how to properly remove insulation, divide strands, and join cables. Then also, properly insulate them.
And while insulating, give like 1inch gap down before you start insulating and work your way upwards,applying tension and leaving no single air-gap.

Each year I go for maintenance (panel washing ) for clients, I inspect everything.... And always, all is intact and still performing optimally.

Finally, one thing with cutting off the head would help you with is identifying if the panel you bought comes with copper (whether pure copper or tinned copper) or aluminium.
Some years back, one man asked me to help check his set-up installed by somebody. The panels were just over 2years but no protection again. Like, the MPPT was not charging again and he was wondering whether the MPPT was bad. After troubleshooting, I told him that nothing is wrong with the MPPT and the problem could be that something is wrong somewhere with the Array.
Right on the roof, I started disconnecting the panels to test them one after the other. And yes, MC4 was used. First 2 panels were okay but the 3rd one in the string wasn't reading any voltage. Out of 9panels, 6 were not reading.

We now brought down all the panels. I decided to open the black boxes and test directly, bypassing the cables. Mehn, see decay! Cable has decayed at the point it's connected to the diode assembly and has literally decayed off. The cables were ALUMINIUM cables!!!

In summary, we changed all cables and soldered copper cables to the diode assembly. That solves it. However, the man later changed all the panels...

I've also had one client that bought Joysolar panels sometime and asked me to come and install. After cutting the first head and realising the cable was aluminium, we jejely changed all cables on all 12panels. And the annoying part is that, the aluminium is ALWAYS coated with copper colour. Not until you handle it, and then you'll realise it's aluminium.... That's is, if you can actually be able to differentiate

However, when you buy original panels from original source, you won't have doubt as to whether they came with Copper or Aluminium. They always come with copper (pure or tinned).

Whichever case, I love cutting and twist-joining... Trust me, some twist-joining outlasts some MC4 connections...

Whatever anyone finds comfortable, the key thing is the professionalism you applied in whatever method .. Cheers

saint2ace:



You sha get energy

darediamond:
Does Natural Coal Get Formed In An Open Surface?
How come you expect to get quality man-made coal from burning wood in Air?

See, my directions are meant for individuals who are ready to GET THERE HANDS DIRTY LIKE I'M DOING MYSELF TO KEEP DISCOVERING SERIES OF WONDERS.

IF YOU DO NOT UNDERSTAND SOMETHING, YOU ASK QUESTIONS not that you become [b]unnecessarily arrogant [/b]at the person providing you with his or her own discovery.

Have you even tried what I explained on how to get the said effect at all?

Come on!!!

Saintmaker01:
Good afternoon guys, please what's the dollar cap of these banks and how much is their rates?
Standard Chartered Bank

Stanbic Ibtc

Gomoney

I want to buy something of $400, I'm trying to know if I can combine the 3 app.

brightk:


does it mean removing mc4 connectors harms the current the pv is generating? please i need more clarification on this.. sometimes this mc4 connectors do not make good contacts

Hollawayn05:


Thanks for the insight, the wire was cut off and joined den covered with aa tape, if it was the arc formed causing the low voltage what's the possible solution sir?

saint2ace:




I paid ₦480/$1 with gomoney yesterday. I'm guessing it was a glitch of sort.....

jboixxx:
615/$ ? God almighty.... They've gone haywire again!

Icecream4U:
rate?

Prechy2Ej:
this is good, I'm still expecting my standard chartered card it was approved since on the 4th of this month
What is the rate for gomony

Prechy2Ej:
boss just open a gomoney account and it is not working don know if I have to contact their cc

Hollawayn05:


Nothing changed sir

What I noticed befor now is that their is a drop in voltage anytime I off the circuit breaker connecting the panel to CC..
The system was okay yesterday am just Suprised

Clikkz:
Omo, These cards should please comeback, I have 2 pending refunds

okikigsm:


boss good evening .any update ontop this matter?

Hollawayn05:


The picture dint load earlier, kindly check again, am currently using the system as we speak and charge icon not yet on day mode

FireTheSun:


What does it take to produce Solar Panels in Nigeria?
Dont we produce Batteries (Berec Batteries, Exide Batteries) in Nigeria, in the 70s/80's?

These are the two major expense in Solar Setup, if we set our priorities right and stop enriching China, every house can have a Solar Panel and Batteries for backup at night.

Please forgive my rant, e just dey vex me at times.

adrusa:



Excellent. There is no "burning" without oxygen. The technical term for burning is "Combustion", while what the gentleman was talking about is called "Pyrolysis". However, your explanation about production and mechanism of action of activated charcoal is not correct. Please check it up. Activated charcoal acts by trapping poison, not by reacting with it. It is a physical process, not chemical.

HeadofNairaland:
@adrusa and @ceaser
He is saying things in a lay man terms.
If u were asked to touch ur throat u will touch ur neck and ur neck, neck.

Definitely, not actual burning ( with an obvious flame) without oxygen but u which term will u use when u see smoke out of a "body"?

Those who are into charcoal production will not burn wood to see actual flame. Na ash be dat na.

For water to boil out of wood shows a temperature close to 100 degrees.

*****There is no smoke without fire****

You get my point?

Probably I was supposed to quote the burn.
Correction accepted.

HeadofNairaland:


Bros wood will burn without oxygen.
I dont know him but i will make research if someone told me that 2+1 is 4.

darediamond:

This is exactly what is Needed for Activated Carbon High Amperage Battery Which Can Be Self-Buit.


Hint: The easiest way to Produce Activated Carbon Is To Burn Dry Wood In Airtight container. DO Not Pour Water On The Newly Formed Charcoal. Allow The Newly Formed Charcoal To Cool Down By Itself. Charcoal Of This Process Do Generates Electricity Directly. THIS is already Tested and Proven. No Arguments Please! No Research, No Discoveries....

NEPA CAN TAKE OFF THERE OIL AND GAS GENERATED ELECTRICITY.... WHO CARES?