₦airaland Forum

MrOkenwa:
If na me, I won’t negotiate this nonsense.
There’s a sawmill along obasanjo road, not far from the state hospital Ota. If you cross to the other side, okada guys can take you to another one inside Oloko side.
If you don’t want to go through much stress. There’s a small sawmill at a street along oju ore ilogbo road (Ahmed Akindele Street) . That Ahmed Akindele is a wood seller and you can trust him.
I have a property in Afobaje area. I paid 80k for my woodwork (Initial quote was 250k I think) back in 2016 and used about 60% of the quoted woods, all because of that man. I don’t have his contact again but he’s somewhere along that axis.
Building a property in Ota is not for the faint hearted. I must commend you sir.

MrOkenwa:
If na me, I won’t negotiate this nonsense.
There’s a sawmill along obasanjo road, not far from the state hospital Ota. If you cross to the other side, okada guys can take you to another one inside Oloko side.
If you don’t want to go through much stress. There’s a small sawmill at a street along oju ore ilogbo road (Ahmed Akindele Street) . That Ahmed Akindele is a wood seller and you can trust him.
I have a property in Afobaje area. I paid 80k for my woodwork (Initial quote was 250k I think) back in 2016 and used about 60% of the quoted woods, all because of that man. I don’t have his contact again but he’s somewhere along that axis.
Building a property in Ota is not for the faint hearted. I must commend you sir.

ForG:
Please anyone know of a reliable house agent in Oju ore, Itele, or Iyana Iyesi?

Please I need an apartment.

KolaShangOne:
You can buy your wood from Obasanjo (before the police station, coming from Ijagba). There's a big sawmill there around the mechanic workshops.

dangoteinlaw:
then bring your husband to do the roof job for him. Nonsense, only your work is high value while others should toil.

redgem:
Workmanship is 500k? Just for wood work or [/b]both wood work and the sheets installation? [b] Yes
Not even a high roofing...

[/b]Will you be in the site with them while they are working? Are you buying the materials yourself or he is the one buying them? [b] Yes
[/i]That quotation is outrageous for that roof sqm..[i] That's why I am looking for best price

Where is your site located at? If in Lagos, contact Money121

Olusharp:
what sort of ridiculous price list is this?? Workmanship for bungalow 500k... I can see you stay around Iloye... There is a sawmill after Yebade go and price wood there...

dangoteinlaw:
you have helped spread his net even if he doesn't get your job he will get twice more coz I ve saved his contact since he's at ogun

The quotation on is fair you can negotiate 50k out of it.

toyeoye:
Na the workmanship get me

Dum20:
Tnanks.

Do i need to be a customer of morgan before i can access it?

Dum20:
Hello Guys,

Who can share the link where one can see live market. Where you see Bid, Offers, Trades, Market activity?

yMcy56:
MCNICHOLS
6:5 Bonus successfully added........
Mid to long term in view.........

NAHCO when?

Cc: @essentialone

yMcy56:
June 04 2021 posts.
BUACEM closed @91.70 today!
Oga Emma and the Old CCNN investors here, E Ku market o.
My tashere Registrar's copy is showing +576% gain!
Could imagine what the long termers would be feeling like by now......
Think I've always prefer BUA to Wapco, though both are good. Maybe one day with 3xtra dose of patience, Wapco too may be able to make her investors also smile.

thesilentone:


You don't agree?

hamtabfawaz:
He's a carpenter (roofing wood work, decking etc)

hamtabfawaz:
Call him : 0803 615 4159.

cuddling44:
Hello oga topsy.. eku iseh na. Pls i av a land av fenced gated and even built d security house... am thinking of starting my foundation soon but i don't think i will be moving to d site in d next 5years. Or 10 depends cos I wants my kids to finish primary in lagos dats for d next 5years and if all my plans is on point.. or better still they finish their secondary school and we move down... dat one no story we must move.. to kwara state.

Am in a dilemma to do my bore hole now... so i can use for d moulding of my blocks and d building.... av done d survey and am drilling to hundreds meters....
Also d saying dat drilling of boreholes after d building is not good due to d weight of d machine.....



Pls should i drill now.

GAZZUZZ:
It is a very common problem in rusted hubs .

Go back to each wheel the abs sensor is not (mating) sitting properly, sort it out and it will read the pulsar plate.

If you cannot, find my number

diordaves:
The process is called "cranking". They hope to crank the rebar into the new position. I've had similar experience in the past but mine was due to daft workmanship and not to gain space as with your situation.

My solution was simple, decommissioned the daft team and engage a new team to re-align the blocks according to the drawings.

Thank you for the advise

However, cranking do work in some situations like in cantilever outcome but from the photo you posted, I'm not sure the structural integrity of the building would not be affected as this was not planned in the original design as against cantilever cranking which has been factored in from the design.

Is there a resident structural engineer? And do you trust their qualifications and EXPERIENCE? If yes, let them guide you. Nothing beats a structural engineer who knows what they are doing. But if you are doing DIY or using Baba Lati, na there the problem start. No be the cranking per se .

Please Note: I'm NOT a structural engineer. Not even close.

goody234:
whats the story with courtville anyone ..i am thinking of selling

Gluck4cars:
Long story short, the bearings are not original.
Get to the market, they will show you the different types. Original Toyota Brisco bearings has a component that most of the far cheaper after-market brands don't. Same reason the Oga is suggesting you go for a direct tokunbo hub.

GAZZUZZ:
It is a very common problem in rusted hubs .

Go back to each wheel the abs sensor is not (mating) sitting properly, sort it out and it will read the pulsar plate.

If you cannot, find my number

GAZZUZZ:
Is this a South African or Canadian/American built model